Product Description:
The 1000Base-T SFP transceiver is copper SFP module which has one fiber port and one copper port(RJ45).CISCO
Compatible.
Description
Baudcom’s BDTR-GB-PxRC Copper Small Form Pluggable (SFP)transceivers is high performance, cost effective module compliant with the Gigabit Ethernet and 1000- BASE-T standards as specified in IEEE 802. 3-2002 and IEEE 802.3ab, which supp- orting 1000Mbps data- rate up to 100 meters reach over unshielded twisted-pair category 5 cable. The module supports1000 Mbps full duplex data-links with 5-level Pulse Amplitude Modulation (PAM) signals. All four pairs in the cable are used with symbol rate at 250Mbps on each pair. The module provides standard serial ID information compliant with SFP MSA, which can be accessed with address of A0h via the 2wire serial CMOS EEPROM protocol. The physical IC can also be accessed via 2wire serial bus at address A0h.
Features:
Up to 1.25Gbps bi-direction data links
100m transmission over unshielded twistedpair (UTP) Category 5 Cable
Support intelligent auto-negotiation 1000BASE-T operation in host systems with
SGMII interface
Hot-pluggable capability
SFP/GBIC form with compact RJ-45 connector
Very low EMI and excellent ESD protection
+3.3/5V Single power supply
High-Speed Electrical Interface
All high-speed signals are AC-coupled internally.
Table 3. High-speed electrical interface, transmission line-GBIC
Line Frequency fL 125 MHz 5-level encoding, per IEEE 802.3
Tx Output Impedance Zout, TX 100 Ohm Differential, for all Frequencies between 1MHz and 125MHz
Rx Input Impedance Zin, RX 100 Ohm Differential, for all Frequencies between 1MHz and 125MHz
High-speed electrical interface, host-GBIC
Table 4. High-speed electrical interface, host-GBIC
High-Speed Electrical Interface, Host-GBIC
Single ended data input swing Vinsing 250 1200 mV Single ended
Single ended data output swing Voutsing 350 800 mV Single ended
Rise/Fall Time Tr, Tf 175 psec 20%-80%
Tx Input Impedance Zin 50 Ohm Single ended
Rx Output Impedance Zout 50 Ohm Single ended
General Specifications
Table 5. General specifications
General
Data Rate BR 10 1, 000 Mb/sec IEEE 802.3 compatible.
See Notes 2 through 4 below
Cable Length L 100 m Category 5 UTP. BER <10-12
Notes:
1. Clock tolerance is +/- 50 ppm
2. By default, the BDTR-GB-P is a full duplex device in preferred master mode
3. Automatic crossover detection is enabled. External crossover cable is not required
4. 1000 BASE-T operation requires the host system to have an SGMII interface with no clocks, and the module PHY to be configured per Application Note AN-2036. With a SERDES that does not support SGMII, the module will operate at 1000BASE-T only.
Environmental Specifications
Table 6. Environmental specifications
Environmental Specifications
Operating Temperature Top 0 85 °C Case temperature
Storage Temperature Tsto -40 85 °C Ambient temperature
Application:
LAN 1000Base-T
Switch to Switch interface
Switched backplane applications
Router/Server interface
Company Contact:
Contact Name: Dora
Company Name: Shanghai Baudcom Communication Device Co, .ltd
Email:
Tel: +86 21 37709251
Fax: +86 21 37709302
Street Address: Room1301, No45, Lane
1505, Mei Jia Bang Road, Song Jiang
District, Shanghai, Shanghai City,
China 201620
China
Member name: ShanghaiBaudcom
Country:
China
Member Since: 09 July 2013
Total Leads:
140 ShanghaiBaudcom Import Export Business Leads
Business focus: Telecommunications, Communication Devices, E1 Converter, Fiber Midea Converter
Chat:
Verify:
Safe Import Export Tips