Product Description:
16E1 fiber optical multiplexer, is use the PDH fiber transmission technologies. The 2M (E1) interfaces
can connect with the exchanger, light loop device and multi-diplexer directly to form the mircomidi or the special network. Complete alarm function for 16E1, it is stable and easy to maintenance, install and small in size. It has one digital service telephone.
product character
Provides 16 E1 transparent transmission ;
Support 1+1 Fiber uplink protection for option;
With char 16*2 LCD display and SNMP agent inside.
support ALS function(Automatic Laser Shutdown)
Provide Console manage interface(RS232)
Provide 4 100M line Ethernet channel, support mutual negatiate, Ethernet bandwidth is set on base on multiple of 32K.;
Provice one hotline channel for option;
Provide two fiber interfaces, one as master, the other as slave, insuring uninterrupted service transmission.
The rate of optical port is 155Mbps, transmission range can reach 25KM, 40KM, 60KM, 80KM or 100KM;
E1 interface code is HDB3, E1 vibration characteristic conforms to ITU-T G.703, G.823 and G.742;
Ethernet port supports full/half duplex, 10M/100M auto-ataptable;
Ethernet port supports VLAN function and has 4 division mode for user selection;
Ethernet package size support 1916 byte and 4 Ethernet port could be set seperately;
Has complete alarm function and can monitor remote device status;
Supports E1 loop from remote so as to detect and manage device conveniently;
The combination AC220V and DC-48V for redundant
Optical interface
Optical wavelength: 850nm/1310nm for multi- mode optical interface, 1310nm/1550nm for single-mode optic interface
Optical interface: SC/FC
Receiving and dispatching module: >-6dBm
Optical receiver receiving sensitivity <-36 (BER<10):
Dynamic range receiving: >-30dB
Transmitting range: Multi-mode 2 Km, single-mode 40Km, single-mode 60 Km, single-mode 120Km
Vibration characteristic: Satisfies G.742 and the G.823 standard
E1 interface
Interface code: HDB3 code
Line speed: 2.048Mbp/S ą50ppm
Interface standard: ITU-T G 703
Interface impedance: 75ohm/unbalanced or 120ohm/ balanced
Interface characteristic: supports rack (19 inches, 6U high), can reach up to 24 directions
10/100M Base-T interface:
Interface rate:10/100Mbps
Interface characteristic: satisfies IEEE802.3, IEEE802.1Q
Connector: RJ45
RS232/Console port
Rate: 9600Kbps (Asynchronous)
Interface characteristic: Satisfies ITU-T V.24 standard
Connector:RJ45
Power supply
working voltage range wide, good
anti-disturb and Isolation, work stable
option I DC-48V, range DC-36V~DC-72C
option II AC220V, range AC165V~AC240V
Power Consumption: <=10 Watts
environment condition
Operating temperature: 0C~+50 C
Storage temperature: -20 C~+70 C
Relative temperature:95% (uncondensed)
Company Contact:
Contact Name: Dora
Company Name: Shanghai Baudcom Communication Device Co, .ltd
Email:
Tel: +86 21 37709251
Fax: +86 21 37709302
Street Address: Room1301, No45, Lane
1505, Mei Jia Bang Road, Song Jiang
District, Shanghai, Shanghai City,
China 201620
China
Member name: ShanghaiBaudcom
Country:
China
Member Since: 09 July 2013
Total Leads:
140 ShanghaiBaudcom Import Export Business Leads
Business focus: Telecommunications, Communication Devices, E1 Converter, Fiber Midea Converter
Chat:
Verify:
Safe Import Export Tips