Product Description:
3 Axle 80T Low Bed Truck Trailer will be delivered to Zambia.
Zambian customers are our Facebook friends
and have been following TITAN for many years. In 2018 years, the customer asked for details about the tri axle low bed truck trailer. And tell us that he doesn’t have any idea to buy it at the moment, but might buy lowbed semi trailer within two years. We inform customers that if you need a semi trailer in the future, you can contact us at any time. He found TITAN again in 2020 and is looking for a lowbed semi trailer for his project. Customers have already learned a lot about TITAN's lowbed semi trailer on Facebook. They trust TITAN very much as usual, and it went smoothly.
Although the customer is also very familiar with semi trailers. For some novices, semi-trailers are still a bit strange. The following is a brief introduction to the operation of the 3 axle 80t low bed semi trailer.
The semi trailer consists of frame, suspension, langing gear, side protection device, brake and circuit system, etc. Composition, different semi-trailer products have different composition of cargo fixing devices, such as container semi trailer with container locking device, half-hung fence with fence, other semi-hung with fence and box Body, tank body, cylinder, etc.
1. Braking system
A device used for normal driving braking, emergency self-braking and parking brake service braking; when the air pipeline leaks or the tractor suddenly disconnects from the 3 axle lowbed trailer during driving, the low loader trailer can be braked by itself. For low bed trailer that use energy storage brake chambers, the hand brake valve can be used to control the air path to achieve the purpose of parking brake
2. Suspension
A device used to transmit load and reduce shock. The leaf springs are connected in series by the balance arm, the balance arm swings freely within a certain range, and the wheel axle load can be balanced within a certain range.
3. Frame
The frame is the main component used to support loads, install tow pins, suspension, fence or container locking devices, side guards and other devices, and is the main load-bearing component of the low bed truck. The frame is mainly composed of longitudinal beams, cross beams, and penetrating beams to form a space frame structure.
Its structural joints are reasonable, the overall strength and rigidity are balanced, and it has strong bearing capacity without permanent deformation. The longitudinal beams are ‘I’-shaped welded parts by the upper and lower wings, plates and webs welded by automatic tracking submerged arc welding machines; the cross beams are cold-formed channel steel or channel steel, and the through beams are square steel or channel steel.
4. Landing gear
A device used to support the front load of the rear semi-trailer. There are two types of outriggers: linkage and single-action. Linkage and single-action legs are roughly the same in structure. The linkage-type driven leg does not have a gearbox and the active leg is connected by a transmission connecting rod. Rotate the crank to raise and lower the supporting device. The legs can be raised and lowered in two gears: fast and slow. The high gear is used for no load and the low gear is used for heavy loads
Safety operation rules for low bed truck trailer:
1. The driver must strictly abide by the traffic rules and related regulations. The driver must have a complete license and license. It is not allowed to drive a lowbed trailerthat does not match the license, and it is strictly forbidden to drive after drinking.
2. Before starting, the gear lever should be placed in the neutral position, and the hand brake should be tightened. After starting, check whether the instruments, direction mechanisms, brakes, lights, etc. are sensitive and reliable, and confirm that there are no obstacles around, before starting with a horn.
3. When it is forced to stall on a ramp, the hand brake should be tightened, reverse gear should be engaged downhill, front gear uphill, and the front and rear wheels should be wedged firmly. When going downhill, it is not allowed to shift gears or roll in neutral.
4. When the 80t low loader trailer is passing through muddy roads, it should keep driving at a low speed and should not brake suddenly. If the vehicle is trapped in the pit, if the semi trailer is towed, it should be directed by a special person and cooperate with each other; the towing rope should not
Company Contact:
Contact Name: Vehicle Titan
Company Name: Titan Vehicle
Email:
Tel: 18615201302
Fax:
Street Address: Jinan
Shandong Jinan, Shandong 250000
China
Website:
https://www.titanvehicle.com/
Member name: TitanVehicle
Country:
China
Member Since: 25 March 2020
Total Leads:
121 TitanVehicle Import Export Business Leads
Business focus: Truck, Trailer, Semi Trailer, Flatbed Semi Trailer, Lowbed Trailer, Sidelifter, Fuel Tanker Trailer, Cement Bulker, Tipper Semi Trailer
Chat:
Verify:
Safe Import Export Tips