-
- Trade Leads
- Trade Services
- B2B Directories
- Trade Connections
- Misc
- Contact Us
A free import export trade leads B2B marketplace since 1996 for manufacturers, suppliers, exporters, importers, buyers, sellers, wholesalers, freight forwarders, shippers, trade shows, exhibits, and export management.
Hello visitor from
USA - 62 visiting from 25 USA 
13 Canada 
8 Germany 
5 France 
3 UK 
2 Belgium 
2 Brazil 
1 Zimbabwe 
1 Hong Kong 
1 Iran 
1 Czech Republic
Hello visitor from
USA - 62 visiting from 25 USA 13 Canada 8 Germany 5 France 3 UK 2 Belgium 2 Brazil 1 Zimbabwe 1 Hong Kong 1 Iran 1 Czech Republic
8e1 To Ethernet Converter
Posted at: Offers to Sell and Export | Posted on: Monday 5 August 2013 2:47 am | Poster last visit: Friday 22 January 2016 |
Product Description:
8E1 to Ethernet converter, E1 port support 75ohm or 120ohm, Ethernet port support 10/100M bps. LAN-WAN
connectivity.
The 8E1 to ethernet converter (also called ethernet over 8E1 converter) uses reverse multiplexing technology to transmit 10/100BaseT data with bonding multi E1 channels, realizing conversion between 1-8 E1 channels and Ethernet interface. It can transmit signals point-to-point from E1 channel to RJ45 interface to realize connection between E1 channel and Ethernet. Being different from general long-distance bridge, the 8 E1 to ethernet converter supports flexible configuration of 1 to 8 channels E1 and can detect the number of E1 channel and choose available channel. In the meantime, certain difference of transmitting delay is allowed among E1 channels. Line rate is 1968Kbit/s for one E1 channel and bandwidth can reach 15744Kbit/s for 8 E1 channels. When used in 10/100Mbps half/full duplex mode, this equipment can be connected with Ethernet switch or hub (integrated circuit machine) to expand transmitting distance and application scope of Ethernet by making full use of large number of E1 channels in current telecommunication network. It is an excellent solution for connecting Ethernet broadband. This product can be applied in many fields such as connection of LAN and end offices, video ordering (VOD), remote monitor and E1 interface of switches.
Features:
Realizes transparent transmission of Ethernet data in 1 to 8 E1 channels.
Ethernet supports 10M/100M, full/half duplex auto-negociation, supports VLAN.
Ethernet port supports AUTO-MDIX (cross over and straight through auto-adapt).
Setting CRC alarm limitation to auto isolate lines with low transmitting quality (being cut single-directionally); when error code rate of one direction in 2M branch exceeds the limitation, this direction is cut and the other direction will not be affected, namely the two transmitting directions of Ethernet can be unsymmetrical.
Allow 8 E1 channels up to 10ms transmission delay. When the delay exceeds allowed limit range, it can stop transmitting data automatically.
Has 2 loop back functions: E1 local loop, E1 remote loop.
Supports Dynamic Ethernet MAC address (4096) with local address filter function.
E1 interface compatible with ITU-T G.703, G.704, and G.823. not supporting signal timeslot.
E1 interface has internal clock recover circuit and HDB3 code/decode circuit.
Supports E1 channel hot plug, and auto detect effective E1 channels data transmission will not be cut.
Supports 1 to 8 E1 channels customized configuration, auto detect the number of E1 channels and select the available E1 when resetting.
Supports resetting remote system from local system.
Having Ethernet monitor auto reset function.
Parameter and specifications
E1 interface rear panel with 75ohm
Standard: E1 interface compatible with G.703 standard.
Rate: 2.048Mbit/s?50ppm
Coding: HDB3
Impedance: 75ohm ( unbalance) or 120ohm (balance)
Connector: BNC (75ohm) or RJ45 (120ohm)
Jitter: According to G.742 and G.823 rear panel with 120ohm
Ethernet interface
Rate: 10M/100M, full/half duplex auto-adapt.
Protocol: Support IEEE 802.3, IEEE 802.1Q (VLAN)
MAC address table: 4096 MAC addresses.
Ethernet buffer: 64Mbits SDRAM
Physical interface: RJ45, support AUTO-MDIX (cross over and straight through auto-adapt)
Dimension
19inch rackmount type:433 mm(L)×138mm(W)× 44 mm(H)
Operating environment
Voltage: DC-48V, input range: DC-36V~DC-72V
Power Consumption: <=5 Watts
Working temperature: 0C~50C
Storage temperature: -40C~+70C
Humidity: 95%
No causticity and solvent, dust free, and no strong magnetic interference.
Company Contact:
Contact Name: Dora
Company Name: Shanghai Baudcom Communication Device Co, .ltd
Email:
Tel: +86 21 37709251
Fax: +86 21 37709302
Street Address: Room1301, No45, Lane
1505, Mei Jia Bang Road, Song Jiang
District, Shanghai, Shanghai City,
China 201620
China
Member name: ShanghaiBaudcom
Country:
China
Member Since: 09 July 2013
Total Leads: 140 ShanghaiBaudcom Import Export Business Leads
Business focus: Telecommunications, Communication Devices, E1 Converter, Fiber Midea Converter
Chat:
Verify: Safe Import Export Tips
connectivity.
The 8E1 to ethernet converter (also called ethernet over 8E1 converter) uses reverse multiplexing technology to transmit 10/100BaseT data with bonding multi E1 channels, realizing conversion between 1-8 E1 channels and Ethernet interface. It can transmit signals point-to-point from E1 channel to RJ45 interface to realize connection between E1 channel and Ethernet. Being different from general long-distance bridge, the 8 E1 to ethernet converter supports flexible configuration of 1 to 8 channels E1 and can detect the number of E1 channel and choose available channel. In the meantime, certain difference of transmitting delay is allowed among E1 channels. Line rate is 1968Kbit/s for one E1 channel and bandwidth can reach 15744Kbit/s for 8 E1 channels. When used in 10/100Mbps half/full duplex mode, this equipment can be connected with Ethernet switch or hub (integrated circuit machine) to expand transmitting distance and application scope of Ethernet by making full use of large number of E1 channels in current telecommunication network. It is an excellent solution for connecting Ethernet broadband. This product can be applied in many fields such as connection of LAN and end offices, video ordering (VOD), remote monitor and E1 interface of switches.
Features:
Realizes transparent transmission of Ethernet data in 1 to 8 E1 channels.
Ethernet supports 10M/100M, full/half duplex auto-negociation, supports VLAN.
Ethernet port supports AUTO-MDIX (cross over and straight through auto-adapt).
Setting CRC alarm limitation to auto isolate lines with low transmitting quality (being cut single-directionally); when error code rate of one direction in 2M branch exceeds the limitation, this direction is cut and the other direction will not be affected, namely the two transmitting directions of Ethernet can be unsymmetrical.
Allow 8 E1 channels up to 10ms transmission delay. When the delay exceeds allowed limit range, it can stop transmitting data automatically.
Has 2 loop back functions: E1 local loop, E1 remote loop.
Supports Dynamic Ethernet MAC address (4096) with local address filter function.
E1 interface compatible with ITU-T G.703, G.704, and G.823. not supporting signal timeslot.
E1 interface has internal clock recover circuit and HDB3 code/decode circuit.
Supports E1 channel hot plug, and auto detect effective E1 channels data transmission will not be cut.
Supports 1 to 8 E1 channels customized configuration, auto detect the number of E1 channels and select the available E1 when resetting.
Supports resetting remote system from local system.
Having Ethernet monitor auto reset function.
Parameter and specifications
E1 interface rear panel with 75ohm
Standard: E1 interface compatible with G.703 standard.
Rate: 2.048Mbit/s?50ppm
Coding: HDB3
Impedance: 75ohm ( unbalance) or 120ohm (balance)
Connector: BNC (75ohm) or RJ45 (120ohm)
Jitter: According to G.742 and G.823 rear panel with 120ohm
Ethernet interface
Rate: 10M/100M, full/half duplex auto-adapt.
Protocol: Support IEEE 802.3, IEEE 802.1Q (VLAN)
MAC address table: 4096 MAC addresses.
Ethernet buffer: 64Mbits SDRAM
Physical interface: RJ45, support AUTO-MDIX (cross over and straight through auto-adapt)
Dimension
19inch rackmount type:433 mm(L)×138mm(W)× 44 mm(H)
Operating environment
Voltage: DC-48V, input range: DC-36V~DC-72V
Power Consumption: <=5 Watts
Working temperature: 0C~50C
Storage temperature: -40C~+70C
Humidity: 95%
No causticity and solvent, dust free, and no strong magnetic interference.
Company Contact:
Contact Name: Dora
Company Name: Shanghai Baudcom Communication Device Co, .ltd
Email:
Tel: +86 21 37709251
Fax: +86 21 37709302
Street Address: Room1301, No45, Lane
1505, Mei Jia Bang Road, Song Jiang
District, Shanghai, Shanghai City,
China 201620
China
Member name: ShanghaiBaudcom
Country:
ChinaMember Since: 09 July 2013
Total Leads: 140 ShanghaiBaudcom Import Export Business Leads
Business focus: Telecommunications, Communication Devices, E1 Converter, Fiber Midea Converter
Chat:
Verify: Safe Import Export Tips
Similar Suppliers And Manufacturers Import Export Trade Leads
Poe2410 Fast Ethernet Poe Injector 24v1a - By LGLGUO - On Monday 20 February 2023 1:16 am: poe2410 fast ethernet poe injector 24v1a
product features
this product is a power supply designed for network communication equipment small output ripple high efficiency of 90-264vac wi....
Is1000-1005 Series Industrial Ethernet Switches - By houshi - On Monday 3 April 2023 8:12 am: ethernet switches
support 5 100m electrical ports
support ieee802 3 802 3u 802 3x store and forward mode
support 10 100m full half duplex mdi mdi....
Do / Din / Ain 8 Ports Ethernet I / O Module For Data Acquisition And Control - By bliiot - On Wednesday 1 November 2023 2:08 am: do din ain 8 ports ethernet i o module for data acquisition and control
it is design for working in the harsh industrial application environment widely used in a variety of industrial automation security monitoring sys....
Cellular Ethernet Lora Wireless Transmission Gateway For Smart Agriculture - By bliiot - On Friday 27 October 2023 3:47 am: ethernet or 4g network thus realizing remote data acquisition and monitoring lora gateway supports a variety of wireless lora nodes including temp....
Is6000-6028 Series Managed Industrial Ethernet Switch Gigabit Switch - By houshi - On Wednesday 19 April 2023 7:29 am: ethernet switch gigabit switches support 28 gigabit electrical ports including 8 fixed gigabit electrical ports and 4 fixed combo ports sfp slots su....
Lag-s400 Infrared Converter Slag Detection System - By WuhanCenterRise - On Friday 9 September 2022 1:28 am: converter slag detection system
overview
the infrared converter slag detection system uses a far-infrared thermal imager to monitor the situation of....
Greenhouse Ventilation Exhaust Fans Control Inverter 3 Phase 380v Frequency Converter Transducer For - By fxairsolution - On Thursday 24 November 2022 1:53 am: converter is specially designed for greenhouse exhaust fans and has a temperature control function the frequency converter is suitable for exhaust fa....
Mel-40 4e1 To Ethernet Protocol Converter - By tomxiong - On Friday 30 March 2007 2:06 am: ethernet and vice versa this protocol converter could support 1-4e1 to ethernet which extend the bandwidth to 7 68mbps it is widely used in two la.... Import Export Startup Stories
Share Your Story & Get Listed at StartImportExport.com- Beijing Fibridge Co Ltd: Siya Liu Of Beijing Fibridge Company, A Manufacturer Of Intelligent Video And Telecommunication From China
TradersCity.com shall not be held liable for any user posted/submitted content including but not limited to trade leads, profiles, images, and any other data. TradersCity.com does not and did not verify any of users posted/submitted data nor is implicitly or explicitly recommending these business offers. TradersCity does not verify truthfulness, accuracy, completeness, nor legality of any businesses, services, and leads posted here. TradersCity does not represent Sellers or Buyers in any transaction between users of the website and is unable to make any opinion in regard to their performance in any transaction. TradersCity neither guarantees nor undertakes in any dispute between sellers and buyers. Protect your business from fraud by trading safely