Product Description:
8E1 to optical Ethernet converter, 8E1 port(75ohm or 120ohm), 3*Ethernet ports: 1*Optical Ethernet port+2Electrical
ethernet.SNMP management.
8E1-100Base-FX serial interface converter used back multiplexing technology, transfer 10M/100M Ethernet data by using multi E1 channels. Realize convert between 1 to 8 E1 channels and Ethernet interface. It can transmit signal of E1 channel to RJ45 interface point to point, realize the connection of E1 channel and Ethernet. It different from normal bridge, supporting 1 to 8 E1 channels customized configuration, auto detecting the number of E1 channels and use the available E1, allow some limiting transfer delay between different E1 channels. Single line speed is 1968Kbits/s, 8 channels can up to 15744Kbits/s. it can connect with Ethernet switch or hub when in 10/100Mbps full/half duplex mode, make use of mass E1 resource in telecommunication networks to expend the transfer distance and application field of Ethernet, is a suitable solution for broadband switch in of Ethernet. It can used in fields such as connecting LANs, connecting end offices, VOD, remote monitor, E1 interface of switches, etc.
Features
Realizing the transparent transmission of Ethernet data via 1 to 8 E1 lines
Providing 10/100Base-Tx&100Base-Fx interface in compliance with the protocol
standard IEEE 802.3, providing 2 electronical Ethernet ports and one optical Ethernet port
supporting the working mode of either full duplex or half-duplex.
Able to transparently transmit the ultra-long frames (up to 1916 bytes) as defined in IEEE 802.1Q, supporting transparent transmission of VLAN frames.
Providing an in-built dynamic Ethernet MAC address list (1024 addresses) with filtering function for local data frames.
128MBits large capacity cache memory and an in-built SDRAM controller, to adapt to various service requirements.
E1 interface in compliance with ITU-T G.703, G.704 and G.823, not applicable for signaling time slot.
E1 Support 75Ω/unbalance impedance or 120Ω/balance for order
Allowing a clock drift up to 512UI in the transmission system, with significantly enhanced reliability.
Providing availability detection and automatic troubleshooting for 1 to 8 E lines.
Supporting E1 interface loop-back function and Ethernet loop-back function.
Self-contained line alarm indication and output.
Optional power supply, e.g. AC220V or DC-48V; optional mounting type, e.g. desktop or rack mounted.
Power consumption: <10 W
E1 Interface
Line Rate: 2.048Mbps±50ppm
Line Code :HDB3
Interface Standard: ITU-T G.703
E1 Impedance: 75Ω(unbalance) or 120Ω(balance)
Connections : 75ohm DB37 adaptor or 120-ohm twisted-pair (RJ45)
Jitter tolerance : finer than G.742 and G.823
10/100Base-T Interface
Ports: 2*10/100Base-Tx and 1*100Base-Fx ports
Rate: 10/100M, full/duplex auto-negotiation
Protocol: Support IEEE 802.3, IEEE 802.1Q (VLAN)
Total Memory Sizes: 64MBits SDRAM
Physical interface: RJ45, support AUTO-MDIX
Power supply
working voltage range wide, good
anti-disturb and Isolation, work stable
option I – DC-48V, range DC-36V~DC-72C
option II – AC220V, range AC165V~AC240V
Power Consumption: <=10 Watts
environment condition
Operating temperature: 0C~+50 C
Storage temperature: -20 C~+70 C
Relative temperature:95% (uncondensed)
Dimension
440mm(L)X202mm(W)X43.5mm(H)
Company Contact:

Contact Name: Dora
Company Name: Shanghai Baudcom Communication Device Co, .ltd
Email:
Tel: +86 21 37709251
Fax: +86 21 37709302
Street Address: Room1301, No45, Lane
1505, Mei Jia Bang Road, Song Jiang
District, Shanghai, Shanghai City,
China 201620
China
Member name: ShanghaiBaudcom
Country:

China
Member Since: 09 July 2013
Total Leads:
140 ShanghaiBaudcom Import Export Business Leads
Business focus: Telecommunications, Communication Devices, E1 Converter, Fiber Midea Converter
Chat:

Verify:
Safe Import Export Tips