-
- Trade Leads
- Trade Services
- B2B Directories
- Trade Connections
- Misc
- Contact Us
A free import export trade leads B2B marketplace since 1996 for manufacturers, suppliers, exporters, importers, buyers, sellers, wholesalers, freight forwarders, shippers, trade shows, exhibits, and export management.
Hello visitor from
USA - 112 visiting from 102 USA 
4 UK 
3 Singapore 
1 Brazil 
1 Colombia 
1 Germany
Hello visitor from
USA - 112 visiting from 102 USA 4 UK 3 Singapore 1 Brazil 1 Colombia 1 Germany
A 516 / A 516m For Pressure Vessel Plates, Carbon Steel, For Moderate And Lower-temperature
Posted at: Offers to Sell and Export | Posted on: Monday 17 May 2010 9:03 am | Poster last visit: Friday 11 September 2015 |
Product Description:
1.2 Plates under this specification are available in four
grades having different strength levels as
follows:
Tensile Strength, ksi [MPa]
55 [380] 55–75 [380–515]
60 [415] 60–80 [415–550]
65 [450] 65–85 [450–585]
70 [485] 70–90 [485–620]
1.3 The maximum thickness of plates is limited only by the
capacity of the composition to meet the specified mechanical
property requirements; however, current practice normally
limits the maximum thickness of plates furnished under this
specification as follows:
Grade U.S. [SI]
Maximum Thickness, in. [mm]
55 [380] 12 [305]
60 [415] 8 [205]
65 [450] 8 [205]
70 [485] 8 [205]
5. Heat Treatment
5.1 Plates 1.50 in. [40 mm] and under in thickness are
normally supplied in the as-rolled condition. The plates may be
ordered normalized or stress relieved, or both.
5.2 Plates over 1.50 in. [40 mm] in thickness shall be
normalized.
in. [40 mm] and under in thickness, the plates shall be
normalized unless otherwise specified by the purchaser.
Supplementary requirements
Supplementary requirements shall not apply unless specified in the purchase order.
A list of standardized supplementary requirements for use at the option of the purchaser is included
in ASTM Specification A 20/A 20M. Those that are considered suitable for use with this specification
are listed below by title.
S1. Vacuum Treatment, S2. Product Analysis, S3. Simulated Post-Weld Heat Treatment of Mechanical
Test Coupons, S4.1 Additional Tension Test, S5. Charpy V-Notch Impact Test, S6. Drop Weight Test (for Material 0.625 in. [16 mm] and
over in Thickness), S7. High-Temperature Tension Test, S8. Ultrasonic Examination in accordance with Specification
A 435/a 435m, S9. Magnetic Particle Examination, S11. Ultrasonic Examination in accordance with Specification
A 577/a 577m, S12. Ultrasonic Examination in accordance with Specification
A 578/A 578M, and
S17. Vacuum Carbon-Deoxidized Steel.
Company Contact:
Contact Name: Suphie
Company Name: Henan Gang Iron and Steel Co., Ltd
Email:
Gmail:
Yahoo:
Skype: suphie001
Tel: 0086-158-24803279
Fax: 0086-371-88884766
Street Address: 21 Century building,
jinshui district, zhengzhou city, Henan
Province, China
Website: https://gangsteel.com
Member name: steelsuphie
Country:
China
Member Since: 19 April 2010
Total Leads: 52 steelsuphie Import Export Business Leads
Business focus: Steel Plate For Shipbuilding, Platform, Steel Plate For Boiler, Pressure Vessel, Carbon Steel Plate For Structure
Chat:
Verify: Safe Import Export Tips
grades having different strength levels as
follows:
Tensile Strength, ksi [MPa]
55 [380] 55–75 [380–515]
60 [415] 60–80 [415–550]
65 [450] 65–85 [450–585]
70 [485] 70–90 [485–620]
1.3 The maximum thickness of plates is limited only by the
capacity of the composition to meet the specified mechanical
property requirements; however, current practice normally
limits the maximum thickness of plates furnished under this
specification as follows:
Grade U.S. [SI]
Maximum Thickness, in. [mm]
55 [380] 12 [305]
60 [415] 8 [205]
65 [450] 8 [205]
70 [485] 8 [205]
5. Heat Treatment
5.1 Plates 1.50 in. [40 mm] and under in thickness are
normally supplied in the as-rolled condition. The plates may be
ordered normalized or stress relieved, or both.
5.2 Plates over 1.50 in. [40 mm] in thickness shall be
normalized.
in. [40 mm] and under in thickness, the plates shall be
normalized unless otherwise specified by the purchaser.
Supplementary requirements
Supplementary requirements shall not apply unless specified in the purchase order.
A list of standardized supplementary requirements for use at the option of the purchaser is included
in ASTM Specification A 20/A 20M. Those that are considered suitable for use with this specification
are listed below by title.
S1. Vacuum Treatment, S2. Product Analysis, S3. Simulated Post-Weld Heat Treatment of Mechanical
Test Coupons, S4.1 Additional Tension Test, S5. Charpy V-Notch Impact Test, S6. Drop Weight Test (for Material 0.625 in. [16 mm] and
over in Thickness), S7. High-Temperature Tension Test, S8. Ultrasonic Examination in accordance with Specification
A 435/a 435m, S9. Magnetic Particle Examination, S11. Ultrasonic Examination in accordance with Specification
A 577/a 577m, S12. Ultrasonic Examination in accordance with Specification
A 578/A 578M, and
S17. Vacuum Carbon-Deoxidized Steel.
Company Contact:
Contact Name: Suphie
Company Name: Henan Gang Iron and Steel Co., Ltd
Email:
Gmail:
Yahoo:
Skype: suphie001
Tel: 0086-158-24803279
Fax: 0086-371-88884766
Street Address: 21 Century building,
jinshui district, zhengzhou city, Henan
Province, China
Website: https://gangsteel.com
Member name: steelsuphie
Country:
ChinaMember Since: 19 April 2010
Total Leads: 52 steelsuphie Import Export Business Leads
Business focus: Steel Plate For Shipbuilding, Platform, Steel Plate For Boiler, Pressure Vessel, Carbon Steel Plate For Structure
Chat:
Verify: Safe Import Export Tips
Similar Suppliers And Manufacturers Import Export Trade Leads
Steel Plates And Fabrication Service Provider - By bbnsteel - On Thursday 27 October 2022 6:48 am: pressure vessel steel gas cylinder steel shipbuilding and offshore platform steel pipeline steel weather resistant steel corten steel alloy ste....
Zhd 300 Saw Grit Diamond Powder For Moderate Tools Making - By jingjietech - On Friday 5 August 2022 7:09 am: pressure high temperature grit availa....
Exporting Steel Back Plates For One Of The Parts Automobile Disc Brake Pad - By BNbrake - On Friday 11 November 2022 3:06 pm: plates for one of the parts automobile disc brake pad
material q235
process stamping
application amp #65313 part
of disc brake pad
market oe....
Stainless Steel Checkered Tread Plates, 304 Stainless Steel Checkered Plate - By DiamondTreadPlate - On Monday 22 August 2022 9:43 am: plates characterized by beautiful appearance good strength light weight metal material saving and many other advantages checkered steel tread plat....
Carbon Steel Casting - By FoundrySeiko - On Monday 22 August 2022 7:17 am: carbon steel casting
category steel casting
carbon steel casting has high strength plasticity and toughness common grades include q195 q215 q235....
Carbon Steel Spring Wire - By springwire - On Thursday 11 August 2022 2:30 am: carbon steel through cold drawn process that performs well in applications that require average stress loads
high-carbon steel wires are one of the ....
Carbon Steel Expanded Metal Mesh - By HengMiExpanded - On Wednesday 10 August 2022 9:45 am: carbon steel expanded metal mesh zincro material g i
expanded carbon steel is the most economic expanded mesh among the metal use expanded perf....
Steel Tread Plate Sheets Hot Dipped Galvanized Tread Plates - By DiamondTreadPlate - On Monday 22 August 2022 9:50 am: plates are low cost strong anti-corrosion anti-slippery with checkered or embossed patterns
steel checker plate product is appropriate to apply p.... Import Export Startup Stories
Share Your Story & Get Listed at StartImportExport.com- Cangzhou Jinxinlei Pipeline Co Ltd: Hongguang Zhao Of Cangzhou Jinxinlei Pipeline, A Manufacturer And Exporter Of Carbon Steel Pipes From China
- Tianjin Shengjintai Steel and Iron Co Ltd: Eire Guo Of Tianjin Shengjintai Steel and Iron From China
- Shanghai Granda Intl Trading Co Ltd: Helen Hee of Shanghai Granda a Manufacturer and Exporters of Kitchen Cleaning products From China
- Zhongshan Shangfang Instrument Meter Co Ltd: Sharon Lee Of Zhongshan Shangfang Instrument Meter From China
- Doanh Phu Co Ltd: Loc Dao Of Doanh Phu Company Specializing In Vietnamese Agricultural Products From Vietnam
TradersCity.com shall not be held liable for any user posted/submitted content including but not limited to trade leads, profiles, images, and any other data. TradersCity.com does not and did not verify any of users posted/submitted data nor is implicitly or explicitly recommending these business offers. TradersCity does not verify truthfulness, accuracy, completeness, nor legality of any businesses, services, and leads posted here. TradersCity does not represent Sellers or Buyers in any transaction between users of the website and is unable to make any opinion in regard to their performance in any transaction. TradersCity neither guarantees nor undertakes in any dispute between sellers and buyers. Protect your business from fraud by trading safely