Product Description:
Which is better, a wireless or hardwire home security system? This is a question that’s bound to be asked
by anyone considering the installation of a home security system.
Wireless systems are growing in popularity and are favorite systems of the do-it-yourself installer. That’s because they are easier to install than hard wired systems. The wireless security system doesn’t require running wires, but does require the installation of sensor boxes around doors and windows.
The Alarm System often include following parts:
Alarm Control Panel (Host)
Door/Window Magnetic Contact
Smoke Detectors
Gas Leakage Detectors
PIR Motion Detectors
Keyfob (keychain or remote controller)
Strobe Siren
Name: GSM Home Alarm System-G70
Support Contact ID Communication protocol
With Touch Screen Keypad
Main Features:
With Touch Screen of LCD Screen displays Date, Day of the week, Time, and current Armed Status
Supported Languages: Simple Chinese\ Traditional Chinese\ English\ German\ French\ Russian and more.
29 wireless zones (Each zone supports up to 4 sensors) and 2 dedicated zones for remotes (Supports up to 4 remotes or wireless keypads per zone)
8 more wired zones (Each zone supports 1 wired sensor)
Can dial up to 5 phone numbers in sequence
Arm\ Disarm the system by: Main Host(Keypad), Wireless Keypad, Keychain Remotes, or even remotely by phones.
Check door\window status automatically (This is when the system is disarmed only, if a door is opened, it will sound fast "bi bi bi")
Support wireless "ding-dong" doorbell function (Optional)
Non-volatile chip, information stored automatically when off power
Record up to a 10 second greeting for the auto-dialer, Then play the greeting back.
Alarm Sounds if Phone Line is Cut
Remembers programming settings when power is disconnected
Available in both AC\DC with Low-voltage Indicators.
Learn sensors to alarm host panel, very easy operation.
Supports Door. Window. Motion. Smoke. Heat. Glass Break. Gas Leak. Carbon Monoxide Detector. etc.
Support Ademco Contact ID communication protocol.
Store 100 alarm records and 100 arm\disarm information.
Technical Parameter:
Working voltage:100~240VAC
Operating power: 9-15VDC
GSM Frequency:900/1800MHZ, 900/1800/1900MHZ, 850/900/1800/1900MHZ
Wireless Frequency:433MHZ
Static current: ≤ 80mA
Alarm current: ≤ 500mA
GSM transmission power: 2W
Operating environment: Temperature: -10℃-50℃; Humidity:<90%
Maximum available quantity of keychain (remote controllers) : 4 PCS
Maximum available quantity of wireless sensors: 116 PCS
Dimension:180*120*5(mm)
Standard Package:
Touch screen Alarm system (control unit) – 1 pc.
Wireless PIR detector – 1 pc.
Wireless door (gap) sensor – 1 pc.
Remote controller– 2 pcs.
Antenna – 1pc.
Wireless Sound&flash 110dB/0.3m – 1 pc.
Power adpater – 1pc.
User manual – 1pc.
Alarm Control Panel (Host): Alarm Control Panel is a wall-mounted unit where the detection devices and wiring or wireless connected of the alarm are ultimately connected and managed. These include devices such as bells, siren, door contacts, PIR motion detectors, smoke detectors, gas detectors, etc. Typical panels are located in utility closets or access rooms.
Door/Window Magnetic Contact: Magnetic contacts are the most common sensing devices for sensing opening and closing of doors and windows. They are cheap and reliable.
Such sensors consist of two parts - A contact that is installed on the door / window frame and an Activating magnet that is mounted on the door. The magnetic is held in no-alarm contact position when door / window is kept closed. These are installed on a door or window in such a way that opening the door or window causes the magnet to move away from the contact switch which activates the alarm. They have proved to be a tried and tested method of monitoring any of the operable openings in the houses / apartments. These contacts are available in variety of finishes & materials. Heavy duty versions are also available for heavy doors, shutters and gates. The magnetic switches normally have both 'Normally open' & 'Normally Closed' contacts for easier integration with existing systems.
Smoke Detectors: Smoke detector is for detection of fire & smoke, All smoke detectors consist of two basic parts: a sensor to sense the smoke and a very loud electronic horn to wake people up. Smoke detectors can run off of a 9-volt battery.
It has been said that where there is smoke there is fire. It is even more true that where there is fire there is smoke. A fire sends little particles into the air. When these particles reach the smoke detector, they go through the little chamber where the electrons are flying from one electrode to the other. The smoke particles interfere with this flow enough to alert the microchip. The microchip is programmed to send a signal to the alarm.
Company Contact:
Contact Name: Jackie Chow
Company Name: VSTAR International Ltd.
Email:
Tel: 086-755-86088668
Cell: 086-13622364334
Fax: 086-755-86088668
Street Address: No.203 Building,
Shatoujiao, Yantian District,
Shenzhen, China
Member name: burglaralarmsystem
Country:
China
Member Since: 29 July 2009
Total Leads:
1749 burglaralarmsystem Import Export Business Leads
Business focus: Burglar Alarm System, Home Security Alarm System, Wireless Alarm System, Gsm Alarm System
Chat:
Verify:
Safe Import Export Tips