-
- Trade Leads
- Trade Services
- B2B Directories
- Trade Connections
- Misc
- Contact Us
A free import export trade leads B2B marketplace since 1996 for manufacturers, suppliers, exporters, importers, buyers, sellers, wholesalers, freight forwarders, shippers, trade shows, exhibits, and export management.
Hello visitor from
USA - 19 visiting from 15 USA 
3 UK 
1 Germany
Hello visitor from
USA - 19 visiting from 15 USA 3 UK 1 Germany
Bytf605-epoxy Primer
Posted at: Offers to Sell and Export | Posted on: Wednesday 10 May 2017 8:05 am | Poster last visit: Monday 10 July 2017 |
Product Category: Main
» Manufacturing Components and Supplies
» Industrial optics
» Optical device accessories
» Optical coatings
» Bytf605-epoxy Primer
Product Description:
BOYET Series
Characteristic: Good fillibility, easy sanding, give excellent rust proofing for bare metal,
good adhesion power to steel, aluminium, galvanized steel and stainless steel, excellent chemical corrosion resistance and rust resistance.
Substrates Dried and sanded existing finishes, steel, aluminium, stainless steel, galvanized steel, glass fiber reinforced plastic.
Surface Cleaning Wash by warm soap, remove wax, silicon and other contaminations with degreaser, sanding with P800-P1000, wash with clean water then keep dry; again with degreaser.
Mixing Ratio BYTF605 Epoxy Primer BYTH105 Epoxy Hardener BYTX-5 Epoxy Thinner
4 1 1~2
＜30℃ BYTF605 Epoxy Primer BYTH105 Epoxy Hardener BYTX-5 Epoxy Thinner
Spray Viscosity 16-19s to drop off, in 4# viscosity cup at 25°C, Pot-life At 20°C, 3 hours with hardener.
Re-Treatment Sanded with P600 or P800 sand paper, do following construction after drying
Spray Gun Set Up Gravity Feed: 1.2-1.5mm 4-5kg/cm 2
Suction Feed: 1.4-1.6mm 4-5kg/cm 2
Spray Technology Coats&Thickness: 2-3 coats, total 25-35um.
Flash-Off Time: At 25°C, 5-10 minutes between two coats, it depends on temperature and
paint film.
Drying Time A. Allow 10-20 minutes air-drying, then 60°C baking 30 minutes, can sand after cool
down.
B. Air-drying time 3 hours, at 20°C.
Shelf Life 2 years in original sealed can, cool and dry place at 25℃.
Package 1L×12 or 3.75L×4
Note:
1. The substrate must be cleaned and sanded before spray, wet sanding P800-1000 and then dry.
2. At ambient temperature higher than 30℃, add appropriate Retarder Solvent into thinner to avoid blushing. For more details, please refer to technical data sheet of Retarder Solvent.
3. The products mixed with hardener should be used up soon and can not be restore for future use;clean equipments immediately with thinner after application, otherwise it is very difficult to be cleaned after dry.
Company Contact:
Contact Name: Qiqin Huang
Company Name: Guangzhou Zhenroumei Chemical Coatings Limited
Email:
Tel: 02087833698
Fax: 2087833698
Street Address: No. 16, Industrial
Avenue Shihai
Conghua, Guangdong 510970
China
Website: http://www.topwingspaint.com
Member name: topwingspaint
Country:
China
Member Since: 10 May 2017
Total Leads: 18 topwingspaint Import Export Business Leads
Business focus: Auto Coatings, Automotive Paints
Chat:
Verify: Safe Import Export Tips
Characteristic: Good fillibility, easy sanding, give excellent rust proofing for bare metal,
good adhesion power to steel, aluminium, galvanized steel and stainless steel, excellent chemical corrosion resistance and rust resistance.
Substrates Dried and sanded existing finishes, steel, aluminium, stainless steel, galvanized steel, glass fiber reinforced plastic.
Surface Cleaning Wash by warm soap, remove wax, silicon and other contaminations with degreaser, sanding with P800-P1000, wash with clean water then keep dry; again with degreaser.
Mixing Ratio BYTF605 Epoxy Primer BYTH105 Epoxy Hardener BYTX-5 Epoxy Thinner
4 1 1~2
＜30℃ BYTF605 Epoxy Primer BYTH105 Epoxy Hardener BYTX-5 Epoxy Thinner
Spray Viscosity 16-19s to drop off, in 4# viscosity cup at 25°C, Pot-life At 20°C, 3 hours with hardener.
Re-Treatment Sanded with P600 or P800 sand paper, do following construction after drying
Spray Gun Set Up Gravity Feed: 1.2-1.5mm 4-5kg/cm 2
Suction Feed: 1.4-1.6mm 4-5kg/cm 2
Spray Technology Coats&Thickness: 2-3 coats, total 25-35um.
Flash-Off Time: At 25°C, 5-10 minutes between two coats, it depends on temperature and
paint film.
Drying Time A. Allow 10-20 minutes air-drying, then 60°C baking 30 minutes, can sand after cool
down.
B. Air-drying time 3 hours, at 20°C.
Shelf Life 2 years in original sealed can, cool and dry place at 25℃.
Package 1L×12 or 3.75L×4
Note:
1. The substrate must be cleaned and sanded before spray, wet sanding P800-1000 and then dry.
2. At ambient temperature higher than 30℃, add appropriate Retarder Solvent into thinner to avoid blushing. For more details, please refer to technical data sheet of Retarder Solvent.
3. The products mixed with hardener should be used up soon and can not be restore for future use;clean equipments immediately with thinner after application, otherwise it is very difficult to be cleaned after dry.
Company Contact:
Contact Name: Qiqin Huang
Company Name: Guangzhou Zhenroumei Chemical Coatings Limited
Email:
Tel: 02087833698
Fax: 2087833698
Street Address: No. 16, Industrial
Avenue Shihai
Conghua, Guangdong 510970
China
Website: http://www.topwingspaint.com
Member name: topwingspaint
Country:
ChinaMember Since: 10 May 2017
Total Leads: 18 topwingspaint Import Export Business Leads
Business focus: Auto Coatings, Automotive Paints
Chat:
Verify: Safe Import Export Tips
Similar Suppliers And Manufacturers Import Export Trade Leads
Pu White Primer - By raywincoating - On Thursday 6 July 2023 9:33 am: primer sd2023 is a fast-curing high solid white primer for application on wood or wood products it is a two-component and it has the excellent fi....
Pe Primer For Furniture - By raywincoating - On Thursday 6 July 2023 9:30 am: primer also called unsaturated polyester primer is cured by blending the main agent accelerator and initiator to carry out polymerization bridging r....
Epoxy Silicone Oil - By UNISIL - On Monday 27 March 2023 8:37 am: epoxy silicone oil
silicone epoxy epoxy polysiloxane is widely used in textile finishing chemical intermediates resin crosslinking agents buildi....
Epoxy Coated Wire Mesh - By jswireweaving - On Monday 4 September 2023 6:41 am: epoxy coated wire mesh is referred to epoxy mesh
the manufacturing process of epoxy mesh is to use the principle of electrostatic spraying to absorb....
Spike Roller Floor Decor Paint Tool Professional Levering Epoxy Floor Coating - By gsbpainttool - On Saturday 23 December 2023 6:53 am: epoxy coating and floor preparation projects
premium construction our good quality spike roller is constructed with high-quality materials to ensu....
Epoxy Resin Cladding Ammonium Polyphosphate Flame Retardant - By Gd Chemical Industry - On Friday 23 November 2007 1:58 am: epoxy resin cladding ammonium polyphosphate
specification
appearance
white powder
whiteness reflectance %
92 min
....
3240 Epoxy Glass Fabric Laminate Sheet - By Xcyaan06 - On Thursday 13 December 2007 3:04 am: 3240 epoxy glass fabric laminate sheet
3240-epoxy glass fabric laminate sheet with high mechanical and electrical properties can be applied to generators motors and electrical appliances....
Silicone Sealant , Bopp Tape, Masking Tape, Super Glue, P.u Foam, Epoxy Steel, Spray Paint , Rtv Ges - By Almuqarram - On Monday 28 April 2008 5:22 am: epoxy steel care products and adhesive tapes such as- bopp tapes masking tapes aluminum foil tapes duct tapes pvc tapes warning tapes and pri.... Optical coatings Classification Navigation
Main - Manufacturing Components and Supplies - Industrial optics - Optical device accessories - Optical coatings [36]
TradersCity.com shall not be held liable for any user posted/submitted content including but not limited to trade leads, profiles, images, and any other data. TradersCity.com does not and did not verify any of users posted/submitted data nor is implicitly or explicitly recommending these business offers. TradersCity does not verify truthfulness, accuracy, completeness, nor legality of any businesses, services, and leads posted here. TradersCity does not represent Sellers or Buyers in any transaction between users of the website and is unable to make any opinion in regard to their performance in any transaction. TradersCity neither guarantees nor undertakes in any dispute between sellers and buyers. Protect your business from fraud by trading safely