Product Description:
Etco2
Introduction
The OEM Compact CO2 CapnoGraphy Module (CO2CGM) is a complete data collection and
analysis system for monitoring respiratory carbon dioxide concentration. The CO2CGM module includes a miniature of CO2 detecting system, barometric pressure transducer and a miniature low-power vacuum pump. A microprocessor collects the sensor data and calculates various real-time parameters: instantaneous CO2 concentration, end-tidal CO2 concentration, inspired CO2 concentration, inspiration and expiration times.
The module is highly configurable to meet most OEM implementation requirements. System specifications such as baudrate, parity, waveform data rate and floating point data format can be programmed at the factory for custom configurations.
Interfacing to the CO2CGM module is very simple. The module requires a +12V supply at 300mA maximum current (200mA typical). The host sends commands and receives waveform, breath parameters and command responses on two +3.3V asynchronous serial data lines.
Feature
Pyroelectric multispectral detector with thermal compensation;
Non-dispersive infrared (NDIR) single beam optics, dual wavelength, no moving parts;
We are the supplier of Spo2 sensor, ECG cable, EKG cable Ronseda Electronics Technology Inc is the CE certificated and ISO 9001:2008 fully quality management system approved company. Our company established in is one of the leading manufacturers and distributor of medical cables in China. We are committed to provide the quality medical cables& accessories to the customers all over the world. The major products of us are spo2 sensors & Temperature probe & Spo2 probe & ECG cable &EKG cable & Blood pressure accessories.
Gas flow isolated from electronic design. It can prevent system is corrupted by vapour;
Powered by special DC-DC module and work normally even power supply achieves 9V.
Mechanical size
PCB thickness:1.6mm
Fixed Holes:4 X OD3.5mm
Length X Width:110mm X 93mm
Top Height: 36mm
Bottom Height:5mm
Electrical specification
Power and serial communications to the CO2CGM module are provided through connectors J1 and J2.
Connector PIN NAME Description
Below is pin descriptions for J1 & J2:
J1 1 - POWER +12V - +15V, no less than 300mA
2 - GND GND for power supply
J2 1 – GND Signal ground for serial communication
2 – DRX Digital Receive for serial communication
3 – DTX Digital Transmit for serial communication
Company Contact:
Contact Name: Sophia
Company Name: Shenzhen Setolink Exporters Co., Ltd
Email:
Tel: 86-15013755952
Fax: 86-0755-86330961
Street Address: 5fl, Building 51,
Yangmen Industrial Park, Dakan 2
Village, Xili Town, Nanshan District,
Shenzhen, China
Website:
http://www.setolink.com
Member name: SetolinkExporters
Country:
China
Member Since: 12 May 2012
Total Leads:
506 SetolinkExporters Import Export Business Leads
Business focus: Ecg Cable, Spo2 Sensor, Patient Monitor, Video Colposcope, Pulse Oximeter, Obd Cable
Chat:
Verify:
Safe Import Export Tips