-
- Trade Leads
- Trade Services
- B2B Directories
- Trade Connections
- Misc
- Contact Us
A free import export trade leads B2B marketplace since 1996 for manufacturers, suppliers, exporters, importers, buyers, sellers, wholesalers, freight forwarders, shippers, trade shows, exhibits, and export management.
Hello visitor from
USA - 10 visiting from 8 USA 
1 Australia 
1 India
Hello visitor from
USA - 10 visiting from 8 USA 1 Australia 1 India
Conventional Infrared Reflective Beam Smoke Detector
Posted at: Offers to Sell and Export | Posted on: Monday 16 October 2017 5:41 am | Poster last visit: Wednesday 8 May 2019 |
Product Category: Main
» Defense and Law Enforcement and Security and Safety Equipment and Supplies
» Fire protection
» Fire prevention
» Smoke detectors
» Conventional Infrared Reflective Beam Smoke Detector
Product Description:
Products Features:
1. Wide operating voltage range, big monitoring areas.
2. Combination of the emitting
and receiving part makes mounting easy and optical pathway accurate.
3. Built-in microprocessor enables intelligent judgment of fire alarm and fault.
4. The detector can calibrate automatically, which ensures that one person complete adjustment in short time. It’s also convenient to operate.
5. Self-diagnosis function can monitor the inner fault.
6. Automatic compensation for factors weakening received signals, such as dust contamination, positional excursion and ageing transmitter.
7. It has passive output contacts for fire alarm and fault.
8. Two sensitivity levels can be set in field.
9. The detector’s optical pathway is designed with strong anti-interference ability.
10. SMT processing technology.
11. Attractive and decent appearance.
Technical Specifications:
1. Power Voltage: 15VDC-28VDC
2. Power Current: Commission current›20mA, Standby current›12mA, Alarm current›22mA
3. Fire Alarm and Fault Contact Output:
Fire Alarm Relay: Contact capacity 28V/2A, which is normally open in normal state and closed in fire alarm state.
Fault Relay: Contact capacity 28V/2A, which is normally open in normal state and closed in fault state.
4. Angle of Adjusting: -6°-+6°
5. Dependency Angle of Optical Pathway Orientation: 0.5˘
6. Sensitivity Level:
Level 1: High sensitivity.
Level 2: Medium sensitivity.
7. Indication of Detector State:
Commission: Green LED and Yellow LED are lit or flash in a certain way. See details in Section VI Commission.
Normal monitoring state: Red LED flashes periodically.
Fire: Red LED constantly illuminates, and Yellow LED turns off. Fire alarm should be cleared through powering up again.
Fault: Yellow LED constantly illuminates. The detector clears the fault signal automatically if the condition causing the fault disappears.
Optical pathway obscured totally: the detector first gives fault signal and turns on Yellow LED. 20s later, it alarms fire, illuminates Red LED and turns off Yellow LED.
Note: In this case, it does not mean there is a fire. After the obscuration is removed, the detector clears fault signal automatically. Fire signal has to be cleared by powering up the detector again.
8. Operating Environment: Temperature: -10°C-+50°C, Relative Humidity 95%, non condensing
9. Monitoring Area: aximum monitoring area: 14*100=1400m2, Maximum width: 14m
10. Length of Optical Pathway: 8m-100m
11. Protection Level:
Under common environment, ingress protection rating is IP20.
Under special environment, ingress protection rating is IP66 through glue-seal treatment.
12. Dimension: length: 206mm width: 95mm thickness: 95mm
13. Material and Color of Enclosure: ABS, Gray
14. Weight: 450g
15. Mounting Hole Spacing: Spacing for embedding: 158mm
Spacings for surface mounting: 79mm€96mm
Structure and Operation Principle:
The detector and reflector are placed oppositely.
The detector includes emitting part and receiving part.
Infrared beam of certain intensity sent out from the emitting part is reflected by the right-angle prisms of the reflector, and then received by the receiving part of the detector.
The receiving part simultaneously collects and amplifies the returned infrared beam, analyzes and judges the collected signals through its microprocessor.
When the detector is in normal monitoring state, the intensity of infrared beam received by the receiving part is steady at a certain level.
When smoke particles enter the detecting area, the intensity of infrared light received by the receiving part falls owing to light scattering.
When the smoke particles reach a certain density, and the intensity of infrared light received by the receiving part is reduced below the preset threshold value, the detector alarms fire, illuminates Red LED, and closes passive fire output contact.
Operation principle is shown in pictures.
Company Contact:
Contact Name: Wesley
Company Name: Supersafe International Industry Co., Ltd
Email:
Tel: 86-0755-27839103
Fax:
Street Address: 2/f, D Building,
Bao Yuan Industrial Park, 39 Zone,
Bao An, Shenzhen, China 518101
Member name: wesley0130
Country:
China
Member Since: 21 December 2009
Total Leads: 37 wesley0130 Import Export Business Leads
Business focus: Wireless Home Alarm System, Burglar Alarm, Gsm Alarm System, Gsm Car Alarm, Car Alarm Sysem, Video Door Phone, Access Control System, Fingerprint Lock
Chat:
Verify: Safe Import Export Tips
1. Wide operating voltage range, big monitoring areas.
2. Combination of the emitting
and receiving part makes mounting easy and optical pathway accurate.
3. Built-in microprocessor enables intelligent judgment of fire alarm and fault.
4. The detector can calibrate automatically, which ensures that one person complete adjustment in short time. It’s also convenient to operate.
5. Self-diagnosis function can monitor the inner fault.
6. Automatic compensation for factors weakening received signals, such as dust contamination, positional excursion and ageing transmitter.
7. It has passive output contacts for fire alarm and fault.
8. Two sensitivity levels can be set in field.
9. The detector’s optical pathway is designed with strong anti-interference ability.
10. SMT processing technology.
11. Attractive and decent appearance.
Technical Specifications:
1. Power Voltage: 15VDC-28VDC
2. Power Current: Commission current›20mA, Standby current›12mA, Alarm current›22mA
3. Fire Alarm and Fault Contact Output:
Fire Alarm Relay: Contact capacity 28V/2A, which is normally open in normal state and closed in fire alarm state.
Fault Relay: Contact capacity 28V/2A, which is normally open in normal state and closed in fault state.
4. Angle of Adjusting: -6°-+6°
5. Dependency Angle of Optical Pathway Orientation: 0.5˘
6. Sensitivity Level:
Level 1: High sensitivity.
Level 2: Medium sensitivity.
7. Indication of Detector State:
Commission: Green LED and Yellow LED are lit or flash in a certain way. See details in Section VI Commission.
Normal monitoring state: Red LED flashes periodically.
Fire: Red LED constantly illuminates, and Yellow LED turns off. Fire alarm should be cleared through powering up again.
Fault: Yellow LED constantly illuminates. The detector clears the fault signal automatically if the condition causing the fault disappears.
Optical pathway obscured totally: the detector first gives fault signal and turns on Yellow LED. 20s later, it alarms fire, illuminates Red LED and turns off Yellow LED.
Note: In this case, it does not mean there is a fire. After the obscuration is removed, the detector clears fault signal automatically. Fire signal has to be cleared by powering up the detector again.
8. Operating Environment: Temperature: -10°C-+50°C, Relative Humidity 95%, non condensing
9. Monitoring Area: aximum monitoring area: 14*100=1400m2, Maximum width: 14m
10. Length of Optical Pathway: 8m-100m
11. Protection Level:
Under common environment, ingress protection rating is IP20.
Under special environment, ingress protection rating is IP66 through glue-seal treatment.
12. Dimension: length: 206mm width: 95mm thickness: 95mm
13. Material and Color of Enclosure: ABS, Gray
14. Weight: 450g
15. Mounting Hole Spacing: Spacing for embedding: 158mm
Spacings for surface mounting: 79mm€96mm
Structure and Operation Principle:
The detector and reflector are placed oppositely.
The detector includes emitting part and receiving part.
Infrared beam of certain intensity sent out from the emitting part is reflected by the right-angle prisms of the reflector, and then received by the receiving part of the detector.
The receiving part simultaneously collects and amplifies the returned infrared beam, analyzes and judges the collected signals through its microprocessor.
When the detector is in normal monitoring state, the intensity of infrared beam received by the receiving part is steady at a certain level.
When smoke particles enter the detecting area, the intensity of infrared light received by the receiving part falls owing to light scattering.
When the smoke particles reach a certain density, and the intensity of infrared light received by the receiving part is reduced below the preset threshold value, the detector alarms fire, illuminates Red LED, and closes passive fire output contact.
Operation principle is shown in pictures.
Company Contact:
Contact Name: Wesley
Company Name: Supersafe International Industry Co., Ltd
Email:
Tel: 86-0755-27839103
Fax:
Street Address: 2/f, D Building,
Bao Yuan Industrial Park, 39 Zone,
Bao An, Shenzhen, China 518101
Member name: wesley0130
Country:
ChinaMember Since: 21 December 2009
Total Leads: 37 wesley0130 Import Export Business Leads
Business focus: Wireless Home Alarm System, Burglar Alarm, Gsm Alarm System, Gsm Car Alarm, Car Alarm Sysem, Video Door Phone, Access Control System, Fingerprint Lock
Chat:
Verify: Safe Import Export Tips
Similar Suppliers And Manufacturers Import Export Trade Leads
Jty-jm Tx3703 Intelligent Reflective Beam Smoke Detector - By Yiwuyidune - On Thursday 25 January 2024 11:57 am: conventional reflective beam detector
*jty-jm- tx3703 intelligent reflective beam detector has built-in laser beam pointer and digital guide display ....
Api 11 E Conventional Beam Pumping Unit For Oil Sucking Machine - By yppetro - On Friday 14 April 2023 6:32 am: conventional beam pumping unit for oil sucking machine
product description
beam pumping unit for oil sucking
api c series pumping unit a conventio....
Highway Guardrail Transition W Beam To Thrie Beam - By dachuguardrail - On Saturday 9 March 2024 6:13 am: beam w beam to thrie beam
a highway guardrail transition beam is a critical piece of equipment for road safety it provides a smooth transition point....
Conventional Wiper Blade Super - By scantopco - On Thursday 16 November 2023 4:53 am: conventional wiper blade super
features
1 nano graphite coating with premium nature rubber
2 automated assembling production with reasonable price
material
1 rubber nat....
20t Conventional Heavy Duty Lathe Machine Horizontal Lathe - By havenmachine - On Wednesday 11 May 2022 7:11 am: conventional heavy duty lathe machine horizontal lathe
main features
this series lathe guideway width is 1100mm and max loading weight between tw....
High Reflective Ceramic Granule - By chidamineral - On Tuesday 20 February 2024 7:53 am: reflective ceramic granule ——hirefle
high reflectance roofing granule is a new energy saving roofing granule specifically designed for building indus....
Color Infrared Aerial Photography - By feiyantech - On Tuesday 16 August 2022 3:43 am: infrared aerial photography can not only be used to document changes to the environment the health of forests wetlands bays and oceans but also to....
Infrared / Laser Cut-to-length Cutting System - By WuhanCenterRise - On Thursday 8 September 2022 3:02 am: infrared laser cut-to-length cutting system
overview
the all-digital non-contact infrared automatic cut-to-length cutting system developed by wuhan .... Smoke detectors Classification Navigation
Main - Defense and Law Enforcement and Security and Safety Equipment and Supplies - Fire protection - Fire prevention - Smoke detectors [32]
TradersCity.com shall not be held liable for any user posted/submitted content including but not limited to trade leads, profiles, images, and any other data. TradersCity.com does not and did not verify any of users posted/submitted data nor is implicitly or explicitly recommending these business offers. TradersCity does not verify truthfulness, accuracy, completeness, nor legality of any businesses, services, and leads posted here. TradersCity does not represent Sellers or Buyers in any transaction between users of the website and is unable to make any opinion in regard to their performance in any transaction. TradersCity neither guarantees nor undertakes in any dispute between sellers and buyers. Protect your business from fraud by trading safely