-
- Trade Leads
- Trade Services
- B2B Directories
- Trade Connections
- Misc
- Contact Us
A free import export trade leads B2B marketplace since 1996 for manufacturers, suppliers, exporters, importers, buyers, sellers, wholesalers, freight forwarders, shippers, trade shows, exhibits, and export management.
Hello visitor from
USA - 99 visiting from 94 USA 
3 UK 
1 India 
1 Germany
Hello visitor from
USA - 99 visiting from 94 USA 3 UK 1 India 1 Germany
Corrugated Sheet Roofing, Corrugations
Posted at: Offers to Sell and Export | Posted on: Friday 25 March 2016 8:56 am | Poster last visit: Monday 14 August 2023 | Targeted Countries: Hong Kong | Saint Lucia | Ukraine
Product Category: Main
» Structures and Building and Construction and Manufacturing Components and Supplies
» Exterior finishing materials
» Roofing materials
» Roof valleys
» Corrugated Sheet Roofing, Corrugations
Product Description:
Corrugated Sheet Roofing, Corrugations
Corrugated sheet roofing material is widely available and easy
to use.
Corrugations should run in a straight line between the highest and lowest points, and at a right angle to the purlins (the intermediate supports).
The overlaps (ends and sides) depends upon the sloop of the roof.
Purlin spacing should suit the end laps required for the size of sheet to be used.
Sheets should be laid so that the side overlaps are directed away from the prevailing wind.
All purlins should be in one plane and parallel to each other. They should be properly anchored to the supporting superstructure.
Ends of all sheets should be supported by purlins. The free overhang at the eaves should not exceed 300 mm.
8 mm diameter (min) hook bolts, crank bolts or coach screws, should be inserted through 10 mm diameter drilled holes.- NEVER PUNCHED - in the crown of the corrugations.
Nuts or screws should be tightened lightly at first, and then tightened again when a dozen or more sheets have been laid. At intermediate purlins, they should not be tightened in an attempt to make the sheet rest on the purlins.
A cat-ladder or roof board should always be used when working on a roof for safety of the person and to avoid damage to the roofing material.
Installation of corrugated roof sheeting
These notes are intended to cover the use and installation of corrugated roof sheets such as PVC, other plastics and bitumen fibre sheets. Although very different as materials and where they are used, they do have similar properties regarding flexibility and weight. One advantage of these corrugated materials is that it is far more rigid than a flat sheet of a similar type and thickness. This enables considerable savings in both weight and cost, it also makes the sheet relatively easy to handle. Generally all these types of material can be used either as roofing or vertical cladding.
Most of these sheeting tends to be susceptible to condensation when used as cladding for outhouses etc. - being relatively thin they tend to have low thermal insulation properties. Condensation will be reduced if the interior of the structure is well ventilated.
Being thin sheeting, most types will act as a 'drum skin' when it rains. The sheets can also become heated by direct sunlight and this heating can be radiated into the building making it very uncomfortable in hot weather. A false ceiling suspended under the roof can reduce both of these problems, the void between the roofing and ceiling must be adequately ventilated to avoid excessive temperatures (especially important where plastic roof sheeting is used) and to minimise condensation. Choosing light colour sheets (or, where the material allows this, painting them white/silver) will reduce the internal heating effect.
PVC has a service temperature range of -20°C - +70°C. Care must be taken to ensure that it is not used in situations where the maximum service temperature could be exceeded. As such it is not recommended for use in situations where a false ceiling is to be erected below the rooflight, as this will cause heat build up in the sheet, exceeding the maximum temperature of +70°C which may lead to discoloration or distortion of the sheet.
Storing before use
Plastic and bitumen sheets must not be stored in a stack in direct sunlight, as solar heating will cause the sheets in the centre of the stack to distort. If sheets have to be left outside prior to installation, they should be covered completely by an opaque, light-coloured tarpaulin.
Avoid working with sheet materials in windy conditions, even in light breezes it may be necessary to temporarily weight the sheets while working with them - this is especially relevant to light weight plastic sheets.
Company Contact:
Contact Name: George Sun
Company Name: Qingdao Krs Perfect Roof Co., Ltd.
Email:
Tel: 008613061226262
Fax: 008653258725916
Street Address: No. 139 Fuzhoubei
Road, Qingdao, Shandong 266071 China
Other Contact Info:
Skype: 008613061226262
Whatsapp: 008613061226262
Member name: chinaroof
Country:
China
Member Since: 25 March 2016
Total Leads: 26 chinaroof Import Export Business Leads
Business focus: Roofing Tile, Roof Panel, Wall Cladding, Corrugated Bitumen Roof Sheet, Stone Coated Metal Roof Tile, Nails
Chat:
Verify: Safe Import Export Tips
Corrugated sheet roofing material is widely available and easy
to use.
Corrugations should run in a straight line between the highest and lowest points, and at a right angle to the purlins (the intermediate supports).
The overlaps (ends and sides) depends upon the sloop of the roof.
Purlin spacing should suit the end laps required for the size of sheet to be used.
Sheets should be laid so that the side overlaps are directed away from the prevailing wind.
All purlins should be in one plane and parallel to each other. They should be properly anchored to the supporting superstructure.
Ends of all sheets should be supported by purlins. The free overhang at the eaves should not exceed 300 mm.
8 mm diameter (min) hook bolts, crank bolts or coach screws, should be inserted through 10 mm diameter drilled holes.- NEVER PUNCHED - in the crown of the corrugations.
Nuts or screws should be tightened lightly at first, and then tightened again when a dozen or more sheets have been laid. At intermediate purlins, they should not be tightened in an attempt to make the sheet rest on the purlins.
A cat-ladder or roof board should always be used when working on a roof for safety of the person and to avoid damage to the roofing material.
Installation of corrugated roof sheeting
These notes are intended to cover the use and installation of corrugated roof sheets such as PVC, other plastics and bitumen fibre sheets. Although very different as materials and where they are used, they do have similar properties regarding flexibility and weight. One advantage of these corrugated materials is that it is far more rigid than a flat sheet of a similar type and thickness. This enables considerable savings in both weight and cost, it also makes the sheet relatively easy to handle. Generally all these types of material can be used either as roofing or vertical cladding.
Most of these sheeting tends to be susceptible to condensation when used as cladding for outhouses etc. - being relatively thin they tend to have low thermal insulation properties. Condensation will be reduced if the interior of the structure is well ventilated.
Being thin sheeting, most types will act as a 'drum skin' when it rains. The sheets can also become heated by direct sunlight and this heating can be radiated into the building making it very uncomfortable in hot weather. A false ceiling suspended under the roof can reduce both of these problems, the void between the roofing and ceiling must be adequately ventilated to avoid excessive temperatures (especially important where plastic roof sheeting is used) and to minimise condensation. Choosing light colour sheets (or, where the material allows this, painting them white/silver) will reduce the internal heating effect.
PVC has a service temperature range of -20°C - +70°C. Care must be taken to ensure that it is not used in situations where the maximum service temperature could be exceeded. As such it is not recommended for use in situations where a false ceiling is to be erected below the rooflight, as this will cause heat build up in the sheet, exceeding the maximum temperature of +70°C which may lead to discoloration or distortion of the sheet.
Storing before use
Plastic and bitumen sheets must not be stored in a stack in direct sunlight, as solar heating will cause the sheets in the centre of the stack to distort. If sheets have to be left outside prior to installation, they should be covered completely by an opaque, light-coloured tarpaulin.
Avoid working with sheet materials in windy conditions, even in light breezes it may be necessary to temporarily weight the sheets while working with them - this is especially relevant to light weight plastic sheets.
Company Contact:
Contact Name: George Sun
Company Name: Qingdao Krs Perfect Roof Co., Ltd.
Email:
Tel: 008613061226262
Fax: 008653258725916
Street Address: No. 139 Fuzhoubei
Road, Qingdao, Shandong 266071 China
Other Contact Info:
Skype: 008613061226262
Whatsapp: 008613061226262
Member name: chinaroof
Country:
ChinaMember Since: 25 March 2016
Total Leads: 26 chinaroof Import Export Business Leads
Business focus: Roofing Tile, Roof Panel, Wall Cladding, Corrugated Bitumen Roof Sheet, Stone Coated Metal Roof Tile, Nails
Chat:
Verify: Safe Import Export Tips
Similar Suppliers And Manufacturers Import Export Trade Leads
Sincerely Seeking Agents Of Fiber Cement Sheet And Calcium Silicate Sheet Worldwide - By kamchung - On Monday 5 September 2022 8:45 am: sheet something like outdoor wallpaper for different structures and objects we are sincerely looking for agents of fiber cement board calcium sili....
Sincerely Looking For Agents Of Fiber Cement Sheet, Calcium Silicate Sheet And Plaster Boar Worldwid - By Kamchungbuilding - On Thursday 18 August 2022 7:56 am: sincerely looking for agents of fiber cement sheet calcium silicate sheet and plaster boar worldwid
we are sincerely looking for agents of fiber cement board calcium silicate board and gypsum board around the world we will provide you good price ....
Roofing Nails - By concretenail - On Monday 22 August 2022 2:38 am: roofing nails are mainly used for building and construction carpentry upholstery andfurniture decoration roofing nails have a larger head allowing....
Corrugated Shaker Screen - By dcsolidscontrol - On Wednesday 18 May 2022 6:49 am: corrugated shaker screen
product description
shale shaker screen is the critical parts or spare parts for shaker of drilling mud system it is screen panels fit on shale sh....
Corrugated Steel Beam Barrier - By highwayguardrail - On Tuesday 4 April 2023 8:12 am: corrugated steel beam guard rail safety barriers with delineators
corrugated steel beam barriers csbbs are traffic barrier systems designed to abso....
Ms Corrugated Cardboard Production Line - By yanglimachine - On Tuesday 28 June 2022 6:28 am: corrugated cardboard machine for sale corrugated machinery manufacturers
product description
working principle
tile line is the abbreviation of....
Galvanized Corrugated Steel Plate - By shineyondmetals - On Friday 24 November 2023 3:02 am: corrugated steel plate
description
what is corrugated steel plate and what is it used for
corrugated sheet metal is produced by stretching a sheet....
Corrugated Cardboard Cutting Machine - By yanglimachine - On Tuesday 28 June 2022 6:27 am: corrugated cardboard production line
yangli corrugated cardboard cutting machine maximum working width 1400 mm operation direction left or right .... Import Export Startup Stories
Share Your Story & Get Listed at StartImportExport.com- Tianjin Shengjintai Steel and Iron Co Ltd: Eire Guo Of Tianjin Shengjintai Steel and Iron From China
- Keen Sourcing Shanghai Co Ltd : Alina Of Keen Sourcing Helping Overseas Buyers To Source From China
- Guangzhou Kinggreat Trading Ltd: Emma Lee Of Guangzhou Kinggreat Trading An Electronic Products And Accessories Supplier From China
- Baoji Hong Ya Da Nonferrous Metal Materails Co Ltd: Ms Carrolyn Of Baoji Hong Ya Da Nonferrous Metal Materials From China
Roof valleys Classification Navigation
Main - Structures and Building and Construction and Manufacturing Components and Supplies - Exterior finishing materials - Roofing materials - Roof valleys [2]
TradersCity.com shall not be held liable for any user posted/submitted content including but not limited to trade leads, profiles, images, and any other data. TradersCity.com does not and did not verify any of users posted/submitted data nor is implicitly or explicitly recommending these business offers. TradersCity does not verify truthfulness, accuracy, completeness, nor legality of any businesses, services, and leads posted here. TradersCity does not represent Sellers or Buyers in any transaction between users of the website and is unable to make any opinion in regard to their performance in any transaction. TradersCity neither guarantees nor undertakes in any dispute between sellers and buyers. Protect your business from fraud by trading safely