-
- Trade Leads
- Trade Services
- B2B Directories
- Trade Connections
- Misc
- Contact Us
A free import export trade leads B2B marketplace since 1996 for manufacturers, suppliers, exporters, importers, buyers, sellers, wholesalers, freight forwarders, shippers, trade shows, exhibits, and export management.
Hello visitor from
USA - 33 visiting from 16 USA 
10 Canada 
3 UK 
1 Hong Kong 
1 Nepal 
1 Belgium 
1 Germany
Hello visitor from
USA - 33 visiting from 16 USA 10 Canada 3 UK 1 Hong Kong 1 Nepal 1 Belgium 1 Germany
Cross Tapered Roller Bearings Precision Machine Tool Using
Posted at: Offers to Sell and Export | Posted on: Tuesday 2 September 2014 9:26 am | Poster last visit: Thursday 12 February 2015 |
Product Category: Main
» Manufacturing Components and Supplies
» Bearings and bushings and wheels and gears
» Bearings
» Roller bearings
» Cross Tapered Roller Bearings Precision Machine Tool Using
Product Description:
Cross Tapered Roller Bearings- precision machine tool using
Cross Tapered Roller Bearings-BYC machine
tool bearings-precision bearings
Cross tapered roller bearing contains two sets of races and rollers brought together at high angles with alternate rollers facing in opposite directions. The height of cross section is similar to single-row bearing for conserving space and saving bearing housing material.And the steep-angle, tapered geometry results in a total effective bearing spread much greater than the width of the bearing itself.
Cross Tapered Roller Bearings XR series:
Xr496051, xr678052(psl912-309a), xr766051(psl912--308a), xr820060(psl912305a), xr855053(psl912-305a), xr882055(psl912-306a), xr889058(psl912-307a), xr897051, jxr637050, jxr652050, jxr699050
Cross tapered roller bearing is able to withstand high overturning moments, and is optimal for machine tools, including vertical boring, grinding machines, precision circular dividing table, gear hobbing machine, turret and industrial robots.
Design Features
l The line contact of races and rollers can offer high rotation accuracy, high stability and high rigidity.
l The adjustment design of pro-load extend the bearing using life, increase the rigidity and reach the smallest runout.
l The nylon spacers has low inertia and small running torque.
l High rotation accuracy and high rigidity, and conserving material costs.
l The steep-angle, tapered geometry results in a total effective bearing spread much greater than the width of the bearing itself.
C. Feature of Crossed Roller Bearing
1. High accuracy and load capacity. Precision ground V grooved ways and rollers.
2. Withstands force in any direction. Alternately crossed rollers 45 degree angle.
3. Easy Installation and get used to small spaces. Threaded mounting holes in standard pattern.
4. Factory preloaded for minimum axial play and low coefficient of friction.
D. Product Application
•Industrial Robotic arm, Reducer drive
•Percision Turntable, NC rotary table
•Rotation part of Machine tools
•Inspection instrument, Medical equipment
•Aero&Aviation equipment, Military radar etc
E. Installation & Cautions
1.Inspect the parts before installing:Clean bearing bracket, main axle or other parts to remove dirt or grease.
2.Place the bearing into the bearing bracket and main axle:To match the design clearance, keep the bearing horizontal and insert the bearing into the bearing bracket or axle.If it is hard to install, use a rubber hammer to slightly hit every part of the bearing, so that the bearing can be attention to the hitting force is too large.Afterwards, the matching status of bearing and basic face can be examined by checking the noise.For a interference fit, use heating or cooling to expand or shrink the parts for ease of installation. Be sure the bearing temperature does not exceed 80℃ . If the split inner or outer ring is acentric, please loosen the blots slightly and rotate the monolithic ring to adjust the concentricity of split ring, so that the bearing can be fit in the bracket.
3.Install the mounting disc:Place the mounting disc onto the bearing and align the screw holes, Screw all the bolts in the holes first and follow the orders show in below diagram when tightening bolts in diagonally opposite sequence, Do not tighten bolts randomly.
Cautions:
1.The normal operating temperature of Crossed roller bearing is 10-80℃, If it is over this range, please contact BYC.
2.If a foreign substance enters inside the bearing structure, the rotation route of the roller may be damage, or the bearing may fail.Please clean the bearing by refill the lubricant grease.
3.Please do not remove or apply force to the bolt and nut of the split bearing.
G. Shipping And Payment
1. Industrial Neutral Packing, Package as your requirements.
2. Small size Bearings:Plastic vacuum packaging bag+Paper Box/Neutral Carton
3.Large size Bearings:Plastic film+Pergamyn paper+Roll tape+Wooden Box
4.Shipping:By air or By sea:DHL/TNT/UPS/EMS etc
5.Min.Order Quantity: 5 Piece/Pieces
6.Supply Ability: 1500 Units/Year
Company Contact:
Contact Name: Yang Liu
Company Name: Luoyang Boying Bearing Co., Ltd
Email:
Tel: 86-379-62275175
Fax: 86-379-62275812
Street Address: Yingzhuang Industry
Park Wangchaoling Laocheng
Luoyang, Henan 471000
China
Website: https://bycbearing.en.alibaba.com
Member name: CrossedRollerBearingsBYC
Country:
China
Member Since: 02 September 2014
Total Leads: 42 CrossedRollerBearingsBYC Import Export Business Leads
Business focus: Crossed Roller Bearing, Rotary Table Bearing, Tapered Roller Bearing, Roller Bearing, Angular Contact Ball Bearing
Chat:
Verify: Safe Import Export Tips
Cross Tapered Roller Bearings-BYC machine
tool bearings-precision bearings
Cross tapered roller bearing contains two sets of races and rollers brought together at high angles with alternate rollers facing in opposite directions. The height of cross section is similar to single-row bearing for conserving space and saving bearing housing material.And the steep-angle, tapered geometry results in a total effective bearing spread much greater than the width of the bearing itself.
Cross Tapered Roller Bearings XR series:
Xr496051, xr678052(psl912-309a), xr766051(psl912--308a), xr820060(psl912305a), xr855053(psl912-305a), xr882055(psl912-306a), xr889058(psl912-307a), xr897051, jxr637050, jxr652050, jxr699050
Cross tapered roller bearing is able to withstand high overturning moments, and is optimal for machine tools, including vertical boring, grinding machines, precision circular dividing table, gear hobbing machine, turret and industrial robots.
Design Features
l The line contact of races and rollers can offer high rotation accuracy, high stability and high rigidity.
l The adjustment design of pro-load extend the bearing using life, increase the rigidity and reach the smallest runout.
l The nylon spacers has low inertia and small running torque.
l High rotation accuracy and high rigidity, and conserving material costs.
l The steep-angle, tapered geometry results in a total effective bearing spread much greater than the width of the bearing itself.
C. Feature of Crossed Roller Bearing
1. High accuracy and load capacity. Precision ground V grooved ways and rollers.
2. Withstands force in any direction. Alternately crossed rollers 45 degree angle.
3. Easy Installation and get used to small spaces. Threaded mounting holes in standard pattern.
4. Factory preloaded for minimum axial play and low coefficient of friction.
D. Product Application
•Industrial Robotic arm, Reducer drive
•Percision Turntable, NC rotary table
•Rotation part of Machine tools
•Inspection instrument, Medical equipment
•Aero&Aviation equipment, Military radar etc
E. Installation & Cautions
1.Inspect the parts before installing:Clean bearing bracket, main axle or other parts to remove dirt or grease.
2.Place the bearing into the bearing bracket and main axle:To match the design clearance, keep the bearing horizontal and insert the bearing into the bearing bracket or axle.If it is hard to install, use a rubber hammer to slightly hit every part of the bearing, so that the bearing can be attention to the hitting force is too large.Afterwards, the matching status of bearing and basic face can be examined by checking the noise.For a interference fit, use heating or cooling to expand or shrink the parts for ease of installation. Be sure the bearing temperature does not exceed 80℃ . If the split inner or outer ring is acentric, please loosen the blots slightly and rotate the monolithic ring to adjust the concentricity of split ring, so that the bearing can be fit in the bracket.
3.Install the mounting disc:Place the mounting disc onto the bearing and align the screw holes, Screw all the bolts in the holes first and follow the orders show in below diagram when tightening bolts in diagonally opposite sequence, Do not tighten bolts randomly.
Cautions:
1.The normal operating temperature of Crossed roller bearing is 10-80℃, If it is over this range, please contact BYC.
2.If a foreign substance enters inside the bearing structure, the rotation route of the roller may be damage, or the bearing may fail.Please clean the bearing by refill the lubricant grease.
3.Please do not remove or apply force to the bolt and nut of the split bearing.
G. Shipping And Payment
1. Industrial Neutral Packing, Package as your requirements.
2. Small size Bearings:Plastic vacuum packaging bag+Paper Box/Neutral Carton
3.Large size Bearings:Plastic film+Pergamyn paper+Roll tape+Wooden Box
4.Shipping:By air or By sea:DHL/TNT/UPS/EMS etc
5.Min.Order Quantity: 5 Piece/Pieces
6.Supply Ability: 1500 Units/Year
Company Contact:
Contact Name: Yang Liu
Company Name: Luoyang Boying Bearing Co., Ltd
Email:
Tel: 86-379-62275175
Fax: 86-379-62275812
Street Address: Yingzhuang Industry
Park Wangchaoling Laocheng
Luoyang, Henan 471000
China
Website: https://bycbearing.en.alibaba.com
Member name: CrossedRollerBearingsBYC
Country:
ChinaMember Since: 02 September 2014
Total Leads: 42 CrossedRollerBearingsBYC Import Export Business Leads
Business focus: Crossed Roller Bearing, Rotary Table Bearing, Tapered Roller Bearing, Roller Bearing, Angular Contact Ball Bearing
Chat:
Verify: Safe Import Export Tips
Similar Suppliers And Manufacturers Import Export Trade Leads
Sealed Single Row Tapered Roller Bearings - By wzzgbearing - On Friday 25 November 2022 2:32 am: tapered roller bearings are made up of four interdependent components the inner ring or cone the tapered rollers or rolling elements the roller r....
High Precision Roller Bearing 527273p5 For Strander Machine - By jinshuobearing - On Thursday 20 July 2023 12:44 am: roller bearings z-527273 zl 600*730*60mm consist of an inner and outer ring a roller-retaining cage and a complement of controlled- contour cylindri....
High Precision Roller Bearing For Extrusion Machine F-81658 T8ar - By jinshuobearing - On Sunday 9 July 2023 1:02 am: roller bearing for extrusion machine f-81658 t8ar
bearing factory number f-81658 t8ar
bearing item code f-81658 t8ar f81658 t8ar
inner diameter d....
Tapered Roller Bearing - By Qianyu - On Wednesday 10 August 2022 6:22 am: tapered roller bearing details
vez tapered roller bearings support high loads within a small mounting space and demonstrate good cornering behaviour....
Tapered Roller Bearing - By nicerbearing - On Thursday 9 March 2023 7:24 am: roller bearings can bear one direction radial load and axial load which are larger than radial ball bearing
tapered roller bearings have widely app....
Single Row Tapered Roller Bearing 32980 540 400 87 / 71mm - By lyjhbearing - On Sunday 27 March 2022 2:23 am: tapered roller bearing detail as following
name 32980
boundary dimension 540x400x87 71mm mm
outer dia 540 mm
inner dia 400 mm
inner height 87....
Cylindrical Roller Bearings - By Qianyu - On Wednesday 10 August 2022 6:24 am: tapered roller bearing cylindrical roller bearing manufacturers
cylindrical bearings are one of the single-row bearings due to its different inte....
Special Cylindrical Roller Bearings Z-527460 Zl - By jinshuobearing - On Sunday 16 July 2023 12:46 am: roller bearing 527460 have a lubrication groove and three lubrication holes in the outer ring the robust solid brass cage is guided on the inner ring.... Import Export Startup Stories
Share Your Story & Get Listed at StartImportExport.com- Guiyang Joint Win Import And Export Co Ltd: Shirley Of Guiyang Joint Win Import And Export From China
- Shijiazhuang Goldrain I E Co Ltd: Candy Liu Of Shijiazhuang Goldrain Flour Mill And Silo From China
- Packware Corporation: Charles Wu Of Packware Corporation Specializing In Packaging Products From Taiwan
- Sheng Chyean Enterprise Co Ltd: Ming Liu Of Sheng Chyean Enterprise Providing Maintenance Service To Local Wire Drawing Mills From Taiwan
- Al Rahma For Import And Export: Yasser Arfa Of Al Rahma For Import And Export From Egypt
Roller bearings Classification Navigation
Main - Manufacturing Components and Supplies - Bearings and bushings and wheels and gears - Bearings - Roller bearings [395]
TradersCity.com shall not be held liable for any user posted/submitted content including but not limited to trade leads, profiles, images, and any other data. TradersCity.com does not and did not verify any of users posted/submitted data nor is implicitly or explicitly recommending these business offers. TradersCity does not verify truthfulness, accuracy, completeness, nor legality of any businesses, services, and leads posted here. TradersCity does not represent Sellers or Buyers in any transaction between users of the website and is unable to make any opinion in regard to their performance in any transaction. TradersCity neither guarantees nor undertakes in any dispute between sellers and buyers. Protect your business from fraud by trading safely