Product Description:
Overview
ERMS2000-V vertical stationary vehicle exhaust remote sensing system is a system that sets
above the multi-lane and monitors the exhaust pollutants of every moving vehicle on each lane, It can measure CO, CO2, HC, NO and opaque smoke intensity rapidly and accurately; record the license, speed and acceleration of the car as well as the environmental parameters on micro air station. The vehicle emission analyzer is composed of a gas monitoring unit, opacity monitoring unit, speed/acceleration monitoring unit, license capture unit, micro weather station and IPC of TDLAS and UV-DOAS technology. The system is with rapid and effective measurement, high automation and detection rate, less maintenance; each lane works independently, measures simultaneously without mutual interference.
Feature Of ERMS-2000-V Vertical Stationary Vehicle Exhaust Remote Sensing System
Stationary overlook installation:
dispensing with repetitive installation and overcome the accurate detection for multi-lane that current remote device cannot achieve to make multi-lane independent and simultaneous detection possible; not required people for watching to economize on manpower;
Simultaneous monitoring on gasoline/diesel vehicle:
adopt spectrum technology of high stability, which can detect emission pollutants of both gasoline and diesel vehicles at the same time to greatly reduce device cost;
Narrow-wave radar speed measurement:
adopt narrow-wave radar speed measurement with low microwave irradiation, low power consumption, long service life, high stability, and reliability; locate target accurately to avoid adjacent clutter interference; fast response time to ensure the capture rate and instantaneity of the target;
Integrated calibration system:
four components (CO, CO2, HC, NO) can be calibrated simultaneously, support both manual/auto calibration with simple operation and high efficiency;
Large measuring range:
a portal frame is as high as 4-6 meter, which is able to monitor emission for different types of vehicle; full road coverage without occupying lane and affecting traffic;
Real-time data matching:
real-time data matching without post-processing; output monitoring results in real time; combined with vehicle identification technology, screen excessive emission vehicle;
Remote online monitoring system:
online monitor battery status, calibration state, system alarm information, wireless communication signals and etc. Remote monitoring and operation, convenient for the operator to monitor system parameters;
Auto record and storage:
logs will record all the operating and alarm information for query and tracing, which is convenient for problem processing and solving. The outage will not affect data storage
Application Of ERMS-2000-V Vertical Stationary Vehicle Exhaust Remote Sensing System
The product is used for the online monitoring of CO, CO2, NOx, HC, and opacity in vehicle exhaust emission. All parts are in the deft design and convenient for installation, which can be installed in all road sections and toll gates. It can form an online monitoring web through appropriate deployment in the typical area. Combined with network transmission technology, it can achieve data sharing and result display with environment detection center and vehicle management center, which provide the scientific basis for decision maker and vehicle exhaust pollution control measures, thus achieve the goal of online monitoring for the city vehicle pollution.
Specification Of ERMS-2000-V Vertical Stationary Vehicle Exhaust Remote Sensing System
Factors Range Absolute Error Relative Erro
Co 0~10% ±0.25% ±10%
Co2 0~16% ±0.25% ±10%
HC 0~10000ppm ±10ppm ±10%
NO 0~10000ppm ±20ppm ±10%
Opacity 0~100% ±2% ±5%
Smoke factor 0~50 ±0.2 ±10%
Optical absorption coefficient 0~16m-1 / ±10%
Pollutant Repeatability: NO, HC, CO, and CO2 is a half of the maximum permissible error.
Speed Range: 5km/h~120km/h
Speed Detection Error: ≤±1.5km/h
Acceleration Error: ≤±0.2m/s2
Vehicle Image Capture Rate: ≥98%
Vehicle License Recognition Rate: ≥90%
Vehicle Image: picture will be saved in database in form of JPEG
Data Transmission Method: wireless wifi, wired broadband or 4G transmission
Response Time: ≤0.5s (T90) (system processing period)
Ambient Temperature: -40℃~+85℃, error≤±0.2℃
Relative Humidity: 0~100%RH, error≤±3%RH
Wind Seed: 0~60m/s, error≤±0.3m/s or ±3%, take the maximum
Atmospheric Pressure: 10hPa~1100hPa, error≤±5hPa
Company Contact:
Contact Name: Alex Wang
Company Name: Hangzhouzetiantechnologyco., Ltd
Email:
Tel: +0086 18957111635
Fax: 0571-87851772
Street Address: 1st Building Of
Taiheng Mansion, No.22 Zhiren
Street, Puyan, Binjiang District,
Hangzhou, China Hangzhou, Zhejiang
310053 China
Website:
https://www.zetian-group.com
Member name: HANGZHOUZETIANTECHNOLOG
Country:
China
Member Since: 23 August 2019
Total Leads:
32 HANGZHOUZETIANTECHNOLOG Import Export Business Leads
Business focus: Cems, Aqms, Pm10 Monitor, Dust Monitor, Air Quality Monitor, Water Quality Analyzers, Continuous Emission Monitoring, Gas Analysis Modules
Chat:
Verify:
Safe Import Export Tips