-
- Trade Leads
- Trade Services
- B2B Directories
- Trade Connections
- Misc
- Contact Us
A free import export trade leads B2B marketplace since 1996 for manufacturers, suppliers, exporters, importers, buyers, sellers, wholesalers, freight forwarders, shippers, trade shows, exhibits, and export management.
Hello visitor from
USA - 133 visiting from 107 USA 
17 Canada 
4 UK 
3 Belgium 
1 Germany 
1 Iran
Hello visitor from
USA - 133 visiting from 107 USA 17 Canada 4 UK 3 Belgium 1 Germany 1 Iran
Fiberglass Continuous Duct Hunter
Posted at: Offers to Sell and Export | Posted on: Friday 7 October 2016 6:58 am | Poster last visit: Monday 5 December 2016 |
Product Category: Main
» Electrical Systems and Lighting and Components and Accessories and Supplies
» Electrical wire management devices and accessories and supplies
» Wire Raceways Conduit and Busways
» Wiring duct
» Fiberglass Continuous Duct Hunter
Product Description:
The frames
Frames are also a feature of the Hunter systems. a larger footprint for stability; steel
brake handles that will last forever; dual rod out-feeding positions and wheels inside the frame width. The two smallest sizes feature frames with the feedout built into the handle. All frames can be laid down on either side. These are just some of the design features that will make every unit more usable and friendly for the end user.
Rod selectIon
Which is the right rod diameter for any given application? The rod selection is usually governed by several factors including:
The size of ducting it is to be pushed through
The distance the rod is to be pushed
The number and tightness of bends in the ducting
If the ducting is already occupied by cable
When being pushed through the duct, any rod will tend to form “sine waves”, hitting the wall of the duct at certain intervals.
Each time the rod comes in contact with the wall of the duct, it causes friction. The friction will build and eventually prevent the rod from being pushed any further. Small rod in large duct will make more frequent contact with the ducting; the same rod in smaller duct will make less frequent contact and therefore less friction so it can be pushed further. Large rod in small ducting is a good situation, but reduced flexibility of the rod may cause increased friction in the tighter bends.
Company Contact:
Contact Name: Caeser
Company Name: Bazhou Wanqi Power Tools Factory
Email:
Tel: +86-0316-7902101
Fax: 0316-7869911
Street Address: No.286, Ying Bin
Road, Bazhou City, Hebei Province ,
China
Bazhou, Hebei 065700
China
Member name: WanQi
Country:
China
Member Since: 30 September 2016
Total Leads: 101 WanQi Import Export Business Leads
Business focus: Fiberglass Duct Rodder, Cable Roller, Cable Drum Jack, Cable Pulley, Wire Grip, Cable Drum Trailer, Cable Pulling Equipment
Chat:
Verify: Safe Import Export Tips
Frames are also a feature of the Hunter systems. a larger footprint for stability; steel
brake handles that will last forever; dual rod out-feeding positions and wheels inside the frame width. The two smallest sizes feature frames with the feedout built into the handle. All frames can be laid down on either side. These are just some of the design features that will make every unit more usable and friendly for the end user.
Rod selectIon
Which is the right rod diameter for any given application? The rod selection is usually governed by several factors including:
The size of ducting it is to be pushed through
The distance the rod is to be pushed
The number and tightness of bends in the ducting
If the ducting is already occupied by cable
When being pushed through the duct, any rod will tend to form “sine waves”, hitting the wall of the duct at certain intervals.
Each time the rod comes in contact with the wall of the duct, it causes friction. The friction will build and eventually prevent the rod from being pushed any further. Small rod in large duct will make more frequent contact with the ducting; the same rod in smaller duct will make less frequent contact and therefore less friction so it can be pushed further. Large rod in small ducting is a good situation, but reduced flexibility of the rod may cause increased friction in the tighter bends.
Company Contact:
Contact Name: Caeser
Company Name: Bazhou Wanqi Power Tools Factory
Email:
Tel: +86-0316-7902101
Fax: 0316-7869911
Street Address: No.286, Ying Bin
Road, Bazhou City, Hebei Province ,
China
Bazhou, Hebei 065700
China
Member name: WanQi
Country:
ChinaMember Since: 30 September 2016
Total Leads: 101 WanQi Import Export Business Leads
Business focus: Fiberglass Duct Rodder, Cable Roller, Cable Drum Jack, Cable Pulley, Wire Grip, Cable Drum Trailer, Cable Pulling Equipment
Chat:
Verify: Safe Import Export Tips
Similar Suppliers And Manufacturers Import Export Trade Leads
Fiberglass Mesh Woven By Fiberglass Yarn - By AoYongGlassFibreFabric - On Monday 24 April 2023 1:43 am: fiberglass mesh woven by fiberglass yarn and then coated by alkaline resistant latex as per below details
45 gsm x 1000 mm width
70 80 gsm x 1000 m....
Industrial Evaporative Air Cooler Conditioning Diffuser Grill Vent For Ventilation Duct Pipe For Sal - By fxairsolution - On Friday 25 November 2022 7:15 am: industrial evaporative air cooler conditioning diffuser grill vent for ventilation duct pipe for sal
description
air vents are commonly used in industrial evaporative air coolers industrial air conditioners industrial humidifiers and other equipm....
Electronic Fiberglass Fabric - By daozhifiberglass - On Monday 31 October 2022 6:33 am: fiberglass fabric is plain weaved on air-jet looms by intersecting warp and weft the fabric surface is treated after 1st and 2nd de-sizing the fabri....
Fiberglass Products For Bathroom - By joyce - On Wednesday 21 June 2023 9:19 am: fiberglass covering parts in different fields such as construction machinery agriculture and livestock machinery medical instrument bathroom solut....
Colored Fiberglass Fabric - By daozhifiberglass - On Monday 31 October 2022 6:34 am: fiberglass fabric is made of regular white fiberglass fabric with dyeing treatment adopts high-temperature resistant and high-strength fiberglass
m....
Fiberglass Engineering Machinery Shell - By FiberglassComposites - On Monday 22 August 2022 2:25 am: fiberglass engineering machinery shell
glass fiber + resin system
process technique hand lay-up l-rtm smc etc
technical strength
1 concept design
2 material selection
3 proc....
Silicone Coated Fiberglass Fabric - By daozhifiberglass - On Monday 31 October 2022 6:34 am: fiberglass fabric is made from a fiberglass base cloth and impregnated or coated one side or both sides with specially compounded silicone rubber due....
Ptfe Coated Fiberglass Fabric - By daozhifiberglass - On Monday 31 October 2022 6:35 am: fiberglass fabric have a woven fiberglass cloth substrate which coated with ptfe ptfe is a material with remarkable properties non-stick friction-fr.... Import Export Startup Stories
Share Your Story & Get Listed at StartImportExport.com- Umur Basim Ve Kirt. San. Ve Tic. A. S.: Canan Istemi Of Umur Basim Ve Kirt San Ve Tic From Turkey In The Production Of Continuous Form Printing
Wiring duct Classification Navigation
Main - Electrical Systems and Lighting and Components and Accessories and Supplies - Electrical wire management devices and accessories and supplies - Wire Raceways Conduit and Busways - Wiring duct [9]
TradersCity.com shall not be held liable for any user posted/submitted content including but not limited to trade leads, profiles, images, and any other data. TradersCity.com does not and did not verify any of users posted/submitted data nor is implicitly or explicitly recommending these business offers. TradersCity does not verify truthfulness, accuracy, completeness, nor legality of any businesses, services, and leads posted here. TradersCity does not represent Sellers or Buyers in any transaction between users of the website and is unable to make any opinion in regard to their performance in any transaction. TradersCity neither guarantees nor undertakes in any dispute between sellers and buyers. Protect your business from fraud by trading safely