-
- Trade Leads
- Trade Services
- B2B Directories
- Trade Connections
- Misc
- Contact Us
A free import export trade leads B2B marketplace since 1996 for manufacturers, suppliers, exporters, importers, buyers, sellers, wholesalers, freight forwarders, shippers, trade shows, exhibits, and export management.
Hello visitor from
USA - 211 visiting from 185 USA 
17 Canada 
3 UK 
1 France 
1 Germany 
1 Hong Kong 
1 Belgium 
1 Singapore 
1 Ecuador
Hello visitor from
USA - 211 visiting from 185 USA 17 Canada 3 UK 1 France 1 Germany 1 Hong Kong 1 Belgium 1 Singapore 1 Ecuador
Gpon Sfp Olt Transceiver
Posted at: Offers to Sell and Export | Posted on: Tuesday 6 August 2013 6:13 am | Poster last visit: Friday 22 January 2016 |
Product Description:
GPON SFP OLT Transceiver, 1490nm 2.5Gbps continuous-mode transmitter with DFB laser, 1310nm 1.25Gbps
burst-mode receiver with APD-TIA.Gigabit Passive Optical Networks (G-PON) – OLT side.
Features
w Single Fiber Transceiver with single mode SC receptacle
w 1490nm continuous-mode transmitter with DFB laser
w 1310nm burst-mode receiver with APD-TIA
w Can reach 20km transmission distance
w Single 3.3V power supply
w Reset burst-mode receiver design
w Burst mode signal detect output which is LVTTL compatible.
w Burst mode received signal strength indication (RSSI) output
w Complies with ITU-T G984.2 Class C+
w Digital diagnostic interface compliant with SFF-8472 Rev 9.4, w Complies with RoHS directive (2002/95/EC)
w Operating case temperature:
Standard : 0 to +70°C
Applications
w Gigabit Passive Optical Networks (G-PON) – OLT side
Description
The BD-4321S-C2CDA transceiver is the high performance module for single fiber by using 1490nm continuous-mode transmitter and 1310nm burst-mode receiver. It is optical line terminal(OLT) for ITU-T G984.2. The optical transceiver is compliant with the Small Form- Factor Pluggable (SFP) Multi-Source Agreement (MSA).
The transmitter section uses a 1490nm DFB LD with automatic power control (APC) function and temperature compensation circuitry to ensure stable extinction ratio over all operating temperature range. and is ClassⅠlaser compliant IEC825 and CDRH standards.The receiver has a hermetically packaged burst-mode APD-TIA (trans-impedance amplifier) pre-amplifier and a burst-mode limiting amplifier with LVPECL compatible differential outputs.
The receiver also includes the function of burst mode signal detect output and fast RSSI output which is enabled by a trigger. When the burst optical power is on, the receiver outputs high level; when the burst optical power is off, the receiver outputs low level. Fast RSSI function can satisfy more severe timing demand to monitor the power from any ONU.
Absolute Maximum Ratings
Parameter Symbol Min. Max. Units Notes
Storage Temperature Tst -40 +85 °C -
Operating Case Temperature Tc 0 70 °C -
Operating Humidity RH 5 90 % Non-condensing
Input Voltage - GND Vcc V -
Power Supply Voltage Vcc-Vee 0 3.6 V -
Recommended Operating Conditions
Parameter Symbol Min Typical Max Unit
Operating Case Temperature Standard Tc 0 - +70 °C
Power Supply Voltage Vcc 3.13 3.3 3.47 V
Power Supply Current Icc - - 500 mA
Optical and Electrical Characteristics
Parameter Symbol Min Typical Max Unit Notes
Transmitter
Data Rate 2.5 Gb/S
Centre Wavelength λc 1480 1500 nm
Spectral Width ∆λ 0.4 1 nm
Side Mode Suppression Ratio SMSR 30 dB
Average Output Power Pout 3 7 dBm 1
Extinction Ratio ER 8.2 dB
Average Launch Power-OFF Transmitter Poff -40 dBm
Optical Eye Diagram Compliant with G984.2
Optical Rise/Fall Time (20%~80%) tr/tf 160 ps
Data Input Swing Differential VIN 200 2400 mV 2
Input Differential Impedance ZIN 90 100 110 Ω
TX Disable Disable 2.0 Vcc V
Enable 0 0.8 V
TX Fault Fault 2.0 Vcc V
Normal 0 0.8 V
Receiver
Data Rate 1.25 Gb/S
Centre Wavelength λc 1260 1360 nm
Receiver Sensitivity Sen -30 dBm 3
Receiver Overload Sat -12 dBm 3
Receiver CID Tolerance 72 Bit
Receiver Reflectance -20 dB
Data Output Voltage - High VOH VccR -1.05 VccR – 0.85 V 4
Data Output Voltage - Low VOL VccR -1.84 VccR – 1.60 V 4
Burst Detect De-assert BSD_D -45 dBm
Burst Detect Assert BSD_A -32 dBm
Burst Detect Hysteresis 1 6 dBm
BRST_Det High V_DET
H 2.4 vcc v
BRST_Det Low V_DETL 0 0.4 V
Reciever Power DDM (RSSI) Error RXDDM +/-3 dBm 5
Company Contact:
Contact Name: Dora
Company Name: Shanghai Baudcom Communication Device Co, .ltd
Email:
Tel: +86 21 37709251
Fax: +86 21 37709302
Street Address: Room1301, No45, Lane
1505, Mei Jia Bang Road, Song Jiang
District, Shanghai, Shanghai City,
China 201620
China
Member name: ShanghaiBaudcom
Country:
China
Member Since: 09 July 2013
Total Leads: 140 ShanghaiBaudcom Import Export Business Leads
Business focus: Telecommunications, Communication Devices, E1 Converter, Fiber Midea Converter
Chat:
Verify: Safe Import Export Tips
burst-mode receiver with APD-TIA.Gigabit Passive Optical Networks (G-PON) – OLT side.
Features
w Single Fiber Transceiver with single mode SC receptacle
w 1490nm continuous-mode transmitter with DFB laser
w 1310nm burst-mode receiver with APD-TIA
w Can reach 20km transmission distance
w Single 3.3V power supply
w Reset burst-mode receiver design
w Burst mode signal detect output which is LVTTL compatible.
w Burst mode received signal strength indication (RSSI) output
w Complies with ITU-T G984.2 Class C+
w Digital diagnostic interface compliant with SFF-8472 Rev 9.4, w Complies with RoHS directive (2002/95/EC)
w Operating case temperature:
Standard : 0 to +70°C
Applications
w Gigabit Passive Optical Networks (G-PON) – OLT side
Description
The BD-4321S-C2CDA transceiver is the high performance module for single fiber by using 1490nm continuous-mode transmitter and 1310nm burst-mode receiver. It is optical line terminal(OLT) for ITU-T G984.2. The optical transceiver is compliant with the Small Form- Factor Pluggable (SFP) Multi-Source Agreement (MSA).
The transmitter section uses a 1490nm DFB LD with automatic power control (APC) function and temperature compensation circuitry to ensure stable extinction ratio over all operating temperature range. and is ClassⅠlaser compliant IEC825 and CDRH standards.The receiver has a hermetically packaged burst-mode APD-TIA (trans-impedance amplifier) pre-amplifier and a burst-mode limiting amplifier with LVPECL compatible differential outputs.
The receiver also includes the function of burst mode signal detect output and fast RSSI output which is enabled by a trigger. When the burst optical power is on, the receiver outputs high level; when the burst optical power is off, the receiver outputs low level. Fast RSSI function can satisfy more severe timing demand to monitor the power from any ONU.
Absolute Maximum Ratings
Parameter Symbol Min. Max. Units Notes
Storage Temperature Tst -40 +85 °C -
Operating Case Temperature Tc 0 70 °C -
Operating Humidity RH 5 90 % Non-condensing
Input Voltage - GND Vcc V -
Power Supply Voltage Vcc-Vee 0 3.6 V -
Recommended Operating Conditions
Parameter Symbol Min Typical Max Unit
Operating Case Temperature Standard Tc 0 - +70 °C
Power Supply Voltage Vcc 3.13 3.3 3.47 V
Power Supply Current Icc - - 500 mA
Optical and Electrical Characteristics
Parameter Symbol Min Typical Max Unit Notes
Transmitter
Data Rate 2.5 Gb/S
Centre Wavelength λc 1480 1500 nm
Spectral Width ∆λ 0.4 1 nm
Side Mode Suppression Ratio SMSR 30 dB
Average Output Power Pout 3 7 dBm 1
Extinction Ratio ER 8.2 dB
Average Launch Power-OFF Transmitter Poff -40 dBm
Optical Eye Diagram Compliant with G984.2
Optical Rise/Fall Time (20%~80%) tr/tf 160 ps
Data Input Swing Differential VIN 200 2400 mV 2
Input Differential Impedance ZIN 90 100 110 Ω
TX Disable Disable 2.0 Vcc V
Enable 0 0.8 V
TX Fault Fault 2.0 Vcc V
Normal 0 0.8 V
Receiver
Data Rate 1.25 Gb/S
Centre Wavelength λc 1260 1360 nm
Receiver Sensitivity Sen -30 dBm 3
Receiver Overload Sat -12 dBm 3
Receiver CID Tolerance 72 Bit
Receiver Reflectance -20 dB
Data Output Voltage - High VOH VccR -1.05 VccR – 0.85 V 4
Data Output Voltage - Low VOL VccR -1.84 VccR – 1.60 V 4
Burst Detect De-assert BSD_D -45 dBm
Burst Detect Assert BSD_A -32 dBm
Burst Detect Hysteresis 1 6 dBm
BRST_Det High V_DET
H 2.4 vcc v
BRST_Det Low V_DETL 0 0.4 V
Reciever Power DDM (RSSI) Error RXDDM +/-3 dBm 5
Company Contact:
Contact Name: Dora
Company Name: Shanghai Baudcom Communication Device Co, .ltd
Email:
Tel: +86 21 37709251
Fax: +86 21 37709302
Street Address: Room1301, No45, Lane
1505, Mei Jia Bang Road, Song Jiang
District, Shanghai, Shanghai City,
China 201620
China
Member name: ShanghaiBaudcom
Country:
ChinaMember Since: 09 July 2013
Total Leads: 140 ShanghaiBaudcom Import Export Business Leads
Business focus: Telecommunications, Communication Devices, E1 Converter, Fiber Midea Converter
Chat:
Verify: Safe Import Export Tips
Similar Suppliers And Manufacturers Import Export Trade Leads
Pon Oeo Repeater Gpon / Epon Amplifier - By ShanghaiBaudcom - On Tuesday 6 August 2013 6:16 am: gpon epon amplifier provide 3r i e re-amplification reshaping and retiming regeneration to signals during optical transmission make transmission ....
Gpon Gigabit Passive Optical Networks - By eoptolink - On Thursday 22 May 2014 3:32 am: gpon is the leading technology being used in fttx ftth deployments pon is different than other optical network topologies in that it is a point to....
Gpon Stick - By eoptolink - On Thursday 22 May 2014 3:33 am: gpon gigabit passive optical network stick eols-gn-25-d and eols-gn-35-d a gpon ont in an msa sfp package the gpon stick provides a pluggable gpon....
Gpon Olt Equipment 8 Ports For Ftth - By RicherLink - On Wednesday 5 June 2019 7:46 am: gpon olt equipment meeting the requirements of itu-t g 984 g 988 and relative standards of china telecom unicom gpon possessing super gpon access ca....
Sfp Optical Transceivers, Data Rate From 100mbps To 2.5gbps, Reach From 550m To 120km - By Netopto - On Monday 26 May 2008 9:32 am: sfp
ac coupling of lvpecl signals
serial id module on mod 0-2
international class 1 laser safety certified
wide operating temperature range
....
Cisco 2811 / 3845 / 1841 / Gbic / Glcs / Sfp / - By hkyejian03 - On Saturday 21 June 2008 3:10 am: cisco 2811 3845 1841 gbic glcs sfp
part no cisco2811
condition new sealed
description cisco 2811 integrated services router w ac pwr 2fe 4hwics 2pvdms 1nme 2aims 64....
Sfp Module - By KNC - On Tuesday 31 March 2009 2:25 am: sfp specification
digital diagnostic monitor interface
compatibel with sff-8472
applications
gigabit ethernet switches and rounters
fi....
Swimming Pool Pump Model Sfp - By siniclan - On Wednesday 8 April 2009 6:25 am: sfp
application
cleaning swimming pool
poduction standard
iec60034-1 iec 335-1
iec 34-1 iso 2548
operating limits
suction lift up to ....
TradersCity.com shall not be held liable for any user posted/submitted content including but not limited to trade leads, profiles, images, and any other data. TradersCity.com does not and did not verify any of users posted/submitted data nor is implicitly or explicitly recommending these business offers. TradersCity does not verify truthfulness, accuracy, completeness, nor legality of any businesses, services, and leads posted here. TradersCity does not represent Sellers or Buyers in any transaction between users of the website and is unable to make any opinion in regard to their performance in any transaction. TradersCity neither guarantees nor undertakes in any dispute between sellers and buyers. Protect your business from fraud by trading safely