-
- Trade Leads
- Trade Services
- B2B Directories
- Trade Connections
- Misc
- Contact Us
A free import export trade leads B2B marketplace since 1996 for manufacturers, suppliers, exporters, importers, buyers, sellers, wholesalers, freight forwarders, shippers, trade shows, exhibits, and export management.
Hello visitor from
USA - 106 visiting from 55 USA 
27 Belgium 
19 Canada 
2 UK 
1 Germany 
1 Russia 
1 France
Hello visitor from
USA - 106 visiting from 55 USA 27 Belgium 19 Canada 2 UK 1 Germany 1 Russia 1 France
Gst Conventional Reflective Laser Beam Smoke Detector For Fire Alarm System
Posted at: Offers to Sell and Export | Posted on: Thursday 27 August 2020 6:37 am | Poster last visit: Thursday 27 August 2020 |
Product Category: Main
» Defense and Law Enforcement and Security and Safety Equipment and Supplies
» Fire protection
» Fire prevention
» Smoke detectors
» Gst Conventional Reflective Laser Beam Smoke Detector For Fire Alarm System
Product Description:
1 Features
JTY-HF-GST102 type beam smoke detector fire reflective type linear non-coding sense infrared
beam smoke detector . Detectors must be supporting the use of reflectors, but requires the use of a reflector or four different decisions based on the distance between the two installed . Detector has the following characteristics :
( 1 ) The transmitter, receiver into one, easy to install, easy to use, optical collimation is good ;
( 2 ) with automatic calibration function, ensure the completion of commissioning by a single person in a short, simple operation, easy ;
( 3 ) has a self- diagnostic function, the detector can monitor internal fault ;
( 4 ) with automatic compensation function, for a certain degree of dust contamination, and the position offset of the launch tube causes the received signal is reduced aging factor can be automatically compensated ;
( 5 ) Field set three levels of sensitivity for different levels of dust place ;
( 6 ) has a fire, failure of passive output contacts ;
( 7 ) to detect optical design clever, strong anti-jamming performance ;
( 8 ) sealed design with waterproof performance ;
( 9 ) patented product, patent No. ZL 033580537.
4.9.2 The main technical indicators
( 1 ) Power supply voltage : DC15V ~ DC28V
( 2 ) Supply Current:
Debugging current ≤ 20mA
Monitor current ≤ 12mA
Alarm current ≤ 22mA
( 3 ) the sensitivity level
A : 1.3 ± 0.3dB
Two : 1.7 ± 0.3dB
Three : 2.3 ± 0.3dB
( 4 ) Indicator :
Commissioning Status: green and yellow lights lit in a particular way or shiny
Normal monitoring state : red LED flashes periodically
Fire Status: Steady red light, yellow light goes out
Fault Status : yellow indicator light
All optical path is blocked : first reported the fault detector and light yellow light, 20s after the probe and reported to the fire and lit the red light, yellow light goes out
( 5 ) Protection area:
Detectors maximum protection area 14 × 100 = 1400m2, maximum width of 14m
( 6 ) Use of the environment :
Temperature : -10 C ~ +55 C
Relative humidity ≤ 95%, non-condensing
( 7 ) Dimensions:
Length : 206mm Width : 95mm Thickness : 95mm
4.9.3 structural characteristics, installation and wiring
The structure and shape of the detector and reflector installation option to install and JTY-HM-GST102 type beam smoke detector fire the same .
On-site installation, you need to 24V DC power cord ( non-polar ), connected to the detector terminals D1, D2; terminals K21, K22 fault passive output normally open contacts, terminals K11, K12 was no fire source output normally open contact ; reflector without wiring. Terminals shown in Figure 1 - 31.
Figure 1 - 31
Wiring requirements : Connecting K11, K12, K21, K22 twisted pair signal lines using fire-retardant, cross-sectional area ≥ 1.0mm2; power lines D1, D2 BV flame retardant cable, cross-sectional area ≥ 1.5mm2.
Company Contact:
Contact Name: Wesley Wong
Company Name: Supersafe International Industry Co., Limited
Email:
Tel: 0755-27839103
Fax: 0755-21971048
Street Address: 2-3/f, B Building
Hua Feng No 1 Industrial Park,
Shenzhen, Guangdong 518101 China
Other Contact Info:
Whatsapp: +86 15915421053
Skype: Wesleywong126
Member name: supersafe
Country:
China
Member Since: 25 December 2014
Total Leads: 3 supersafe Import Export Business Leads
Business focus: Alarm System, Home Security System, Burglar Alarm System, Motion Detector, Pir Detector, Smoke Detector, Video Door Phone, Gas Detector, Cameras
Chat:
Verify: Safe Import Export Tips
JTY-HF-GST102 type beam smoke detector fire reflective type linear non-coding sense infrared
beam smoke detector . Detectors must be supporting the use of reflectors, but requires the use of a reflector or four different decisions based on the distance between the two installed . Detector has the following characteristics :
( 1 ) The transmitter, receiver into one, easy to install, easy to use, optical collimation is good ;
( 2 ) with automatic calibration function, ensure the completion of commissioning by a single person in a short, simple operation, easy ;
( 3 ) has a self- diagnostic function, the detector can monitor internal fault ;
( 4 ) with automatic compensation function, for a certain degree of dust contamination, and the position offset of the launch tube causes the received signal is reduced aging factor can be automatically compensated ;
( 5 ) Field set three levels of sensitivity for different levels of dust place ;
( 6 ) has a fire, failure of passive output contacts ;
( 7 ) to detect optical design clever, strong anti-jamming performance ;
( 8 ) sealed design with waterproof performance ;
( 9 ) patented product, patent No. ZL 033580537.
4.9.2 The main technical indicators
( 1 ) Power supply voltage : DC15V ~ DC28V
( 2 ) Supply Current:
Debugging current ≤ 20mA
Monitor current ≤ 12mA
Alarm current ≤ 22mA
( 3 ) the sensitivity level
A : 1.3 ± 0.3dB
Two : 1.7 ± 0.3dB
Three : 2.3 ± 0.3dB
( 4 ) Indicator :
Commissioning Status: green and yellow lights lit in a particular way or shiny
Normal monitoring state : red LED flashes periodically
Fire Status: Steady red light, yellow light goes out
Fault Status : yellow indicator light
All optical path is blocked : first reported the fault detector and light yellow light, 20s after the probe and reported to the fire and lit the red light, yellow light goes out
( 5 ) Protection area:
Detectors maximum protection area 14 × 100 = 1400m2, maximum width of 14m
( 6 ) Use of the environment :
Temperature : -10 C ~ +55 C
Relative humidity ≤ 95%, non-condensing
( 7 ) Dimensions:
Length : 206mm Width : 95mm Thickness : 95mm
4.9.3 structural characteristics, installation and wiring
The structure and shape of the detector and reflector installation option to install and JTY-HM-GST102 type beam smoke detector fire the same .
On-site installation, you need to 24V DC power cord ( non-polar ), connected to the detector terminals D1, D2; terminals K21, K22 fault passive output normally open contacts, terminals K11, K12 was no fire source output normally open contact ; reflector without wiring. Terminals shown in Figure 1 - 31.
Figure 1 - 31
Wiring requirements : Connecting K11, K12, K21, K22 twisted pair signal lines using fire-retardant, cross-sectional area ≥ 1.0mm2; power lines D1, D2 BV flame retardant cable, cross-sectional area ≥ 1.5mm2.
Company Contact:
Contact Name: Wesley Wong
Company Name: Supersafe International Industry Co., Limited
Email:
Tel: 0755-27839103
Fax: 0755-21971048
Street Address: 2-3/f, B Building
Hua Feng No 1 Industrial Park,
Shenzhen, Guangdong 518101 China
Other Contact Info:
Whatsapp: +86 15915421053
Skype: Wesleywong126
Member name: supersafe
Country:
ChinaMember Since: 25 December 2014
Total Leads: 3 supersafe Import Export Business Leads
Business focus: Alarm System, Home Security System, Burglar Alarm System, Motion Detector, Pir Detector, Smoke Detector, Video Door Phone, Gas Detector, Cameras
Chat:
Verify: Safe Import Export Tips
Similar Suppliers And Manufacturers Import Export Trade Leads
Jty-jm Tx3703 Intelligent Reflective Beam Smoke Detector - By Yiwuyidune - On Thursday 25 January 2024 11:57 am: conventional reflective beam detector
*jty-jm- tx3703 intelligent reflective beam detector has built-in laser beam pointer and digital guide display ....
Api 11 E Conventional Beam Pumping Unit For Oil Sucking Machine - By yppetro - On Friday 14 April 2023 6:32 am: conventional beam pumping unit for oil sucking machine
product description
beam pumping unit for oil sucking
api c series pumping unit a conventio....
Conventional Wiper Blade Super - By scantopco - On Thursday 16 November 2023 4:53 am: conventional wiper blade super
features
1 nano graphite coating with premium nature rubber
2 automated assembling production with reasonable price
material
1 rubber nat....
Infrared / Laser Cut-to-length Cutting System - By WuhanCenterRise - On Thursday 8 September 2022 3:02 am: laser cut-to-length cutting system
overview
the all-digital non-contact infrared automatic cut-to-length cutting system developed by wuhan centerris....
Ldc-x200 Laser Diameter Measuring System - By WuhanCenterRise - On Friday 9 September 2022 1:55 am: laser diameter measurement system
overview
the non-contact diameter measuring system is mainly used in the measurement of the outer diameter of var....
20t Conventional Heavy Duty Lathe Machine Horizontal Lathe - By havenmachine - On Wednesday 11 May 2022 7:11 am: conventional heavy duty lathe machine horizontal lathe
main features
this series lathe guideway width is 1100mm and max loading weight between tw....
High Reflective Ceramic Granule - By chidamineral - On Tuesday 20 February 2024 7:53 am: reflective ceramic granule ——hirefle
high reflectance roofing granule is a new energy saving roofing granule specifically designed for building indus....
Crepow Lsw 1500 Hand Help Laser Welder Laser Welding - By crepow - On Friday 17 March 2023 7:12 am: laser mode
6 compact and stable
7 simple and friendly operation interface for easy operation
8 powerful cooling system provides protection for l.... Import Export Startup Stories
Share Your Story & Get Listed at StartImportExport.com- Ramo Selectronicx: Rahram Palaniyappan Of Ramo Selectronicx In the Business Of Security Electronic Products From India
- Wavespectrum Laser Inc: Bruce Yu Of Wavespectrum Laser, A Manufacturer High Power Semiconductor Lasers From China
- Ever Tech Laser Technology: Edward Elric Of Ever Tech Laser Technology A Manufacturing Company For Laser Machinery From China
- Dalian Golden House Door and Window Manufacture Co Ltd: Aimee Wang Of Dalian Golden House Door and Window Manufacturer From China
- Prelead Industy Co Ltd: Norman Cao Of Prelead Industry, A Trading Company Specializing In Industrial And Electrical Products And Plastic Injection Molding From China
Smoke detectors Classification Navigation
Main - Defense and Law Enforcement and Security and Safety Equipment and Supplies - Fire protection - Fire prevention - Smoke detectors [32]
TradersCity.com shall not be held liable for any user posted/submitted content including but not limited to trade leads, profiles, images, and any other data. TradersCity.com does not and did not verify any of users posted/submitted data nor is implicitly or explicitly recommending these business offers. TradersCity does not verify truthfulness, accuracy, completeness, nor legality of any businesses, services, and leads posted here. TradersCity does not represent Sellers or Buyers in any transaction between users of the website and is unable to make any opinion in regard to their performance in any transaction. TradersCity neither guarantees nor undertakes in any dispute between sellers and buyers. Protect your business from fraud by trading safely