-
- Trade Leads
- Trade Services
- B2B Directories
- Trade Connections
- Misc
- Contact Us
A free import export trade leads B2B marketplace since 1996 for manufacturers, suppliers, exporters, importers, buyers, sellers, wholesalers, freight forwarders, shippers, trade shows, exhibits, and export management.
Hello visitor from
USA - 44 visiting from 21 USA 
14 Canada 
4 France 
2 Germany 
1 Ukraine 
1 Brazil 
1 Hong Kong
Hello visitor from
USA - 44 visiting from 21 USA 14 Canada 4 France 2 Germany 1 Ukraine 1 Brazil 1 Hong Kong
High Strength Precision Nonshrink Grout
Posted at: Offers to Sell and Export | Posted on: Tuesday 22 March 2011 9:30 am | Poster last visit: Tuesday 22 March 2011 | Targeted Countries: Vietnam | Pakistan | Lebanon
Product Description:
High Strength Precision Nonshrink Grout
non-shrink grouting, grouting, concrete admixture, admixtures,
high strength
Cgm-1p
Description
CGM-1P is the industry leading cement-based, nonmetallic, nonshrink grout for supporting machinery and equipment.It is formulated with air release technology that combines high performance with the greatest reliability. CGM-1P meets the performance requirements of specifications for nonshrink grout over a wide temperature range, 4 degree C and 32 degree C, and a long working time, 45 minutes.
Uses
? Installation of machinery and equipment
? Reinforcement and repairing of building structure
? Installation grout of foundation bolts
? Make the floor level
? No shrink grouting of later layer
? Substitute for epoxy resin
? Bridge, road and tunnel projects anti-leakage, anti-crack, waterproof concrete project
? Grouting of machinery and equipment to maintain precision alignment
? Nonshrink grouting of structural steel and precast concrete
? Grouting of anchors and dowels
? Support of tanks and vessels
Advantages
? Strength could reach up to 50MPa 1 day after grouting
? No strength decline during the long term use
? leveling ensure all gaps could be grouted
? Non-shrinkage foundation ensure machines steadily running
? Suitable for oil muddy environment
? Tightly adhere to old concrete
? Provides placement versatility: pour, pump or dry pack
Placement Guidelines
? SURFACE PREPARATION: Concrete must be clean, sound and roughened to ensure a good bond. Soak concrete surface for 8 to 24 hours prior to application with liberal quantities of potable water, leaving the concrete saturated and free of standing water.
? MIXING: Mix CGM-1P thoroughly for approximately four to five minutes to a uniform consistency with a mortar mixer. A drill and paddle mixer is acceptable for single bag mixes. For optimum performance, maintain grout at ambient temperatures between 4 degree C and 32 degree C. Use heated or chilled water to help adjust working time. Mix CGM-1P with 7 - 11 quarts potable water per 100 lb. bag (3 1/2 to 5 1/2 quarts per 50 lb. bag). Do not exceed maximum recommended amount of mixing water as stated on the package or add an amount that will cause segregation. Working time is approximately 45 minutes at 23 degree C.
? methods of placement: cgm-1p may be dry packed, poured or pumped into place. minimum placement thickness for cgm-1p is one inch. for pours over 6 inches in depth cgm-1p should be extended with a clean damp coarse aggregate meeting the requirements of astm c 33, contact muhu concrete admixtures technical center for extension guidelines.
? post-placement procedures: cgm-1p shall be wet cured for a minimum of three days, or coated with an approved curing compound after a minimum 24 hours wet cure. in-service operation may begin immediately after the required grout strength has been reached.
Limitations
? At time of placement, if temperatures of equipment and surfaces are not between 4 degree C and 32 degree C.
? Never exceed the maximum water content as stated on the bag or add an amount that will cause segregation.
? Construction practices dictate concrete foundation should achieve its design strength before grouting.
? Do not hand mix CGM-1P
Package & Storage
CGM-1P is supplied in 50kg multi wall paper bags.
One year in original unopened packaging when stored in dry conditions. Higher humidity will reduce the shelf life.
Technical Target
Item CGM-1P CGM-1J CGM-F
Grouting height/mm 30mm-150mm >=150mm 2mm-30mm
Compressive Strength MPa 1day >=30-50 >=30-50 >=18-25
3days >=45-60 >=40-55 >=32-38
28days >=65-85 >=65-85 >=45-55
1 day Vertical Expansion Radio/% 0.032
Fluidity/mm >=280mm
Adhesive to rod steel bar 6MPa
Water required 12-14%
Material required 2200kg/m3
Maximum Particle Size 3mm
Company Contact:
Contact Name: Miss Tinaye
Company Name: MUHU (china) Construction Materials Co., Ltd.
Email:
Tel: 86-10-69694495 or 86-10-69648067
Fax: 86-10-69687750
Street Address: No 1 Yingbingzhonglu,
Huairou, Beijing, China 101400
Website: https://muhuchina.com
Member name: muhuchina
Country:
China
Member Since: 16 April 2010
Total Leads: 5 muhuchina Import Export Business Leads
Business focus: High Range Water Reducer, Set Accelerators, Set Retarders, Anti-freezing Products, Superplasticizer, Water Reducer, Concrete Additive, Cement Additive
Chat:
Verify: Safe Import Export Tips
non-shrink grouting, grouting, concrete admixture, admixtures,
high strength
Cgm-1p
Description
CGM-1P is the industry leading cement-based, nonmetallic, nonshrink grout for supporting machinery and equipment.It is formulated with air release technology that combines high performance with the greatest reliability. CGM-1P meets the performance requirements of specifications for nonshrink grout over a wide temperature range, 4 degree C and 32 degree C, and a long working time, 45 minutes.
Uses
? Installation of machinery and equipment
? Reinforcement and repairing of building structure
? Installation grout of foundation bolts
? Make the floor level
? No shrink grouting of later layer
? Substitute for epoxy resin
? Bridge, road and tunnel projects anti-leakage, anti-crack, waterproof concrete project
? Grouting of machinery and equipment to maintain precision alignment
? Nonshrink grouting of structural steel and precast concrete
? Grouting of anchors and dowels
? Support of tanks and vessels
Advantages
? Strength could reach up to 50MPa 1 day after grouting
? No strength decline during the long term use
? leveling ensure all gaps could be grouted
? Non-shrinkage foundation ensure machines steadily running
? Suitable for oil muddy environment
? Tightly adhere to old concrete
? Provides placement versatility: pour, pump or dry pack
Placement Guidelines
? SURFACE PREPARATION: Concrete must be clean, sound and roughened to ensure a good bond. Soak concrete surface for 8 to 24 hours prior to application with liberal quantities of potable water, leaving the concrete saturated and free of standing water.
? MIXING: Mix CGM-1P thoroughly for approximately four to five minutes to a uniform consistency with a mortar mixer. A drill and paddle mixer is acceptable for single bag mixes. For optimum performance, maintain grout at ambient temperatures between 4 degree C and 32 degree C. Use heated or chilled water to help adjust working time. Mix CGM-1P with 7 - 11 quarts potable water per 100 lb. bag (3 1/2 to 5 1/2 quarts per 50 lb. bag). Do not exceed maximum recommended amount of mixing water as stated on the package or add an amount that will cause segregation. Working time is approximately 45 minutes at 23 degree C.
? methods of placement: cgm-1p may be dry packed, poured or pumped into place. minimum placement thickness for cgm-1p is one inch. for pours over 6 inches in depth cgm-1p should be extended with a clean damp coarse aggregate meeting the requirements of astm c 33, contact muhu concrete admixtures technical center for extension guidelines.
? post-placement procedures: cgm-1p shall be wet cured for a minimum of three days, or coated with an approved curing compound after a minimum 24 hours wet cure. in-service operation may begin immediately after the required grout strength has been reached.
Limitations
? At time of placement, if temperatures of equipment and surfaces are not between 4 degree C and 32 degree C.
? Never exceed the maximum water content as stated on the bag or add an amount that will cause segregation.
? Construction practices dictate concrete foundation should achieve its design strength before grouting.
? Do not hand mix CGM-1P
Package & Storage
CGM-1P is supplied in 50kg multi wall paper bags.
One year in original unopened packaging when stored in dry conditions. Higher humidity will reduce the shelf life.
Technical Target
Item CGM-1P CGM-1J CGM-F
Grouting height/mm 30mm-150mm >=150mm 2mm-30mm
Compressive Strength MPa 1day >=30-50 >=30-50 >=18-25
3days >=45-60 >=40-55 >=32-38
28days >=65-85 >=65-85 >=45-55
1 day Vertical Expansion Radio/% 0.032
Fluidity/mm >=280mm
Adhesive to rod steel bar 6MPa
Water required 12-14%
Material required 2200kg/m3
Maximum Particle Size 3mm
Company Contact:
Contact Name: Miss Tinaye
Company Name: MUHU (china) Construction Materials Co., Ltd.
Email:
Tel: 86-10-69694495 or 86-10-69648067
Fax: 86-10-69687750
Street Address: No 1 Yingbingzhonglu,
Huairou, Beijing, China 101400
Website: https://muhuchina.com
Member name: muhuchina
Country:
ChinaMember Since: 16 April 2010
Total Leads: 5 muhuchina Import Export Business Leads
Business focus: High Range Water Reducer, Set Accelerators, Set Retarders, Anti-freezing Products, Superplasticizer, Water Reducer, Concrete Additive, Cement Additive
Chat:
Verify: Safe Import Export Tips
Similar Suppliers And Manufacturers Import Export Trade Leads
Wet Strength Metallized Paper - By metallizedpaper - On Thursday 18 April 2024 9:32 am: strength metallized paper
metallized paper designed for labels for re-usable packaging water resistant with good ink retention and wash-off properti....
Non Wet Strength Metallized Paper - By metallizedpaper - On Thursday 18 April 2024 9:39 am: strength metallized paper
non wet strength metallized paper could be used for high quality labels or packages after lamination good printability and....
High Tensile Strength 7 Wire Pc Strand - By yxmaterial - On Tuesday 7 January 2025 7:16 am: strength high elongation and widely being used in precast area
commonly available sizes for 7-wire strands include 9 3mm 11 1mm 12 7mm 15 2mm ....
Lsst-01 Leak And Seal Strength Tester - By materialstests - On Saturday 9 March 2024 1:44 am: strength tester
the lsst-01 leak and seal strength tester is designed for the evaluation of seal performance and integrity in a wide range of packagi....
Non Wet Strength Holographic Metallized Paper - By metallizedpaper - On Thursday 18 April 2024 9:42 am: strength holographic metallized paper
holographic metallized paper is without wet strength it has excellent print-ability properties and gloss which....
Wet Strength Holographic Metallized Paper - By metallizedpaper - On Thursday 18 April 2024 9:35 am: wet strength holographic metallized paper
the designs can be customized keeping a balance of authentication needs amp amp aesthetic appeal in mind water resistant with good ink retention ....
Wet Strength Metallized Paper For Self Adhesive Label - By metallizedpaper - On Thursday 18 April 2024 9:39 am: strength metallized paper for self adhesive label
metallized paper designed for self-adhesive labels that require wet-strength resistance facestock ....
Type A Heavy-duty Tungsten Carbide Brazed Cutting Inserts With Superior Strength For Industrial Mach - By YueqingYueyuAlloyMaterial - On Wednesday 18 December 2024 3:22 am: strength wear resistance and reliability
material and types
material high-grade tungsten carbide ensures unparalleled strength and resilience i.... Import Export Startup Stories
Share Your Story & Get Listed at StartImportExport.com- Led Lamp Lighting Company: Tony Lee Of Led Lamp Lighting Company Specializing in Production And Sale Of Indoor And Outdoor LED Lights
- Xeno Company China: Lywin Of Xeno Specializing in Research, Design and Manufacturing High Power LED Flashlights From China
- Shaoxing Marina Biotechnology: James Han Of Shaoxing Marina Biotechnology From China
TradersCity.com shall not be held liable for any user posted/submitted content including but not limited to trade leads, profiles, images, and any other data. TradersCity.com does not and did not verify any of users posted/submitted data nor is implicitly or explicitly recommending these business offers. TradersCity does not verify truthfulness, accuracy, completeness, nor legality of any businesses, services, and leads posted here. TradersCity does not represent Sellers or Buyers in any transaction between users of the website and is unable to make any opinion in regard to their performance in any transaction. TradersCity neither guarantees nor undertakes in any dispute between sellers and buyers. Protect your business from fraud by trading safely