-
- Trade Leads
- Trade Services
- B2B Directories
- Trade Connections
- Misc
- Contact Us
A free import export trade leads B2B marketplace since 1996 for manufacturers, suppliers, exporters, importers, buyers, sellers, wholesalers, freight forwarders, shippers, trade shows, exhibits, and export management.
Hello visitor from
USA - 28 visiting from 21 USA 
4 Singapore 
2 UK 
1 China
Hello visitor from
USA - 28 visiting from 21 USA 4 Singapore 2 UK 1 China
Hotsale Calcium Silicate Board For Wallboard, Ceiling And Floor Tile In Size 2440 1220, 6-30mm Thick
Posted at: Offers to Sell and Export | Posted on: Thursday 18 August 2022 7:19 am | Poster last visit: Thursday 18 August 2022 |
Product Category: Main
» Structures and Building and Construction and Manufacturing Components and Supplies
» Interior finishing materials
» Wall finishing materials
» Wallboard
» Hotsale Calcium Silicate Board For Wallboard, Ceiling And Floor Tile In Size 2440 1220, 6-30mm Thick
Product Description:
Calcium Silicate Board
1. Introduction
Calcium silicate board is a most widely used material in China
due to its good performance and easy-processing feature. It is moisture proof and heat resistant, so it is commonly used for wall and ceiling to keep away humidity and to slow down the spread of fire. What is more, it can be cut, nailed and screwed, making installation much easier. Then labor cost could be reduced as well.
2. Application
Calcium silicate board is moisture proof and heat resistant, strong and durable, thus commonly used as wall and ceiling for house, office, warehouse, shopping mall, residential complex etc.
3. Specifications
Size (mm) 2440*1220, 2400*1200, 3000*1200, Thickness (mm) 4.5 – 20
Moisture content (%) ≤10
Density (g/cm3) 1.15-1.5
Wet Expansion Rate(%) 0.25
Thermal Conductivity (W/m•K） ≤0.30
Bending Strength(MPa) 9-12
Non- combustibility GB 8624-2006 Class A
4. Advantages
(1). Durable
(2). Insect-free
(3). Moisture proof
(4). Heat-insulated
(5). Easy installation
(6). Safe and Harmless
5. Installation Processes for Interior Wall
(1). Draw lines according to construction plan and install door frames.
(2). Install top keels and floor keels according to the lines. Fix the keels on base walls with nails, and the distance between nails is 600mm.
(3). After installation of top and floor keels, mark down the installation points of vertical keels, with 450mm distance between each other. Then check positions of door and other holes and avoid installing boards on their frames.
(4). Install vertical keels according to installation points. Two ends of vertical keels should be separately installed into top keels and floor keels. Fix them after adjusting and leveling. Keels near walls or poles should be fastened by screws or nails, and the screw/nail distance is 1000mm.
(5). When walls are higher than 3m, it is required to install through keels, which should be fastened by nails or screws.
(6). Check the installation of keels and door frames and make sure they are suitable for board installation. Install the boards starting from door frame or from one end of the walls if there is no door frame. Calcium silicate boards should be fastened by self-tapping screws. Distance between screws is 200mm (near walls) and 300mm (away from walls). Distance between screw and board is no less than 10mm and no more than 16mm. When fixing screws, boards must be close to keels. Then install electric pipes, water pipes, electric cabinet and other fire-proof, sound-proof, water-proof materials. Repeat the same procedures and install the boards from the other side. But seams must be staggered from the first side. For a dual-layer wall installation, seams of the second layer should be staggered from those of the first layer as well.
(7). There are 3 methods to deal with calcium silicate board joints, which are bed joint, deep seam and taped seam. The processes are as follows.
Puttying: Cleaning away dust between gaps and put putty into it, making it smooth on surface.
Pasting binding tapes: Put binding materials on it when the putty is finished. First scrape off a thin layer of putty, about 1mm thick and same width as the tapes. Then put the bonding tapes on it and fasten it by driving out the air inside.
Scraping the middle-layer putty: As soon as pasting the binding tapes, scrape a middle-layer putty about 80mm wider than binding tapes, thickness about 1mm, making the tapes sunk into the putty.
Flattening: Use a big scraper to fill the wedge groove and board with putty and smooth the surface.
Company Contact:
Contact Name: Gavin Zeng
Company Name: Foshan Kam Chung Building Materials Co., Ltd
Email:
Tel: +8613620858122
Fax:
Street Address: Nr. 14-17,
Building A2, Phase 5, Da Zhuan
Wan, Huangqi, Foshan City,
Guangdong Province,
China
Website: http://www.kam-chung.com/
Member name: Kamchungbuilding
Country: China
Member Since: 18 August 2022
Total Leads: 6 Kamchungbuilding Import Export Business Leads
Business focus: Fiber Cement Board, Calcium Silicate Board, Gypsum Board, Mgo, Tile Adhesive
Chat:
Verify: Safe Import Export Tips
1. Introduction
Calcium silicate board is a most widely used material in China
due to its good performance and easy-processing feature. It is moisture proof and heat resistant, so it is commonly used for wall and ceiling to keep away humidity and to slow down the spread of fire. What is more, it can be cut, nailed and screwed, making installation much easier. Then labor cost could be reduced as well.
2. Application
Calcium silicate board is moisture proof and heat resistant, strong and durable, thus commonly used as wall and ceiling for house, office, warehouse, shopping mall, residential complex etc.
3. Specifications
Size (mm) 2440*1220, 2400*1200, 3000*1200, Thickness (mm) 4.5 – 20
Moisture content (%) ≤10
Density (g/cm3) 1.15-1.5
Wet Expansion Rate(%) 0.25
Thermal Conductivity (W/m•K） ≤0.30
Bending Strength(MPa) 9-12
Non- combustibility GB 8624-2006 Class A
4. Advantages
(1). Durable
(2). Insect-free
(3). Moisture proof
(4). Heat-insulated
(5). Easy installation
(6). Safe and Harmless
5. Installation Processes for Interior Wall
(1). Draw lines according to construction plan and install door frames.
(2). Install top keels and floor keels according to the lines. Fix the keels on base walls with nails, and the distance between nails is 600mm.
(3). After installation of top and floor keels, mark down the installation points of vertical keels, with 450mm distance between each other. Then check positions of door and other holes and avoid installing boards on their frames.
(4). Install vertical keels according to installation points. Two ends of vertical keels should be separately installed into top keels and floor keels. Fix them after adjusting and leveling. Keels near walls or poles should be fastened by screws or nails, and the screw/nail distance is 1000mm.
(5). When walls are higher than 3m, it is required to install through keels, which should be fastened by nails or screws.
(6). Check the installation of keels and door frames and make sure they are suitable for board installation. Install the boards starting from door frame or from one end of the walls if there is no door frame. Calcium silicate boards should be fastened by self-tapping screws. Distance between screws is 200mm (near walls) and 300mm (away from walls). Distance between screw and board is no less than 10mm and no more than 16mm. When fixing screws, boards must be close to keels. Then install electric pipes, water pipes, electric cabinet and other fire-proof, sound-proof, water-proof materials. Repeat the same procedures and install the boards from the other side. But seams must be staggered from the first side. For a dual-layer wall installation, seams of the second layer should be staggered from those of the first layer as well.
(7). There are 3 methods to deal with calcium silicate board joints, which are bed joint, deep seam and taped seam. The processes are as follows.
Puttying: Cleaning away dust between gaps and put putty into it, making it smooth on surface.
Pasting binding tapes: Put binding materials on it when the putty is finished. First scrape off a thin layer of putty, about 1mm thick and same width as the tapes. Then put the bonding tapes on it and fasten it by driving out the air inside.
Scraping the middle-layer putty: As soon as pasting the binding tapes, scrape a middle-layer putty about 80mm wider than binding tapes, thickness about 1mm, making the tapes sunk into the putty.
Flattening: Use a big scraper to fill the wedge groove and board with putty and smooth the surface.
Company Contact:
Contact Name: Gavin Zeng
Company Name: Foshan Kam Chung Building Materials Co., Ltd
Email:
Tel: +8613620858122
Fax:
Street Address: Nr. 14-17,
Building A2, Phase 5, Da Zhuan
Wan, Huangqi, Foshan City,
Guangdong Province,
China
Website: http://www.kam-chung.com/
Member name: Kamchungbuilding
Country:
ChinaMember Since: 18 August 2022
Total Leads: 6 Kamchungbuilding Import Export Business Leads
Business focus: Fiber Cement Board, Calcium Silicate Board, Gypsum Board, Mgo, Tile Adhesive
Chat:
Verify: Safe Import Export Tips
Similar Suppliers And Manufacturers Import Export Trade Leads
On Promotion Hotsale Non-asbestos Calcium Silicate Board Durable And Anti-aging - By kamchung - On Monday 5 September 2022 8:32 am: silicate board
1 introduction
calcium silicate board is a most widely used material in china due to its good performance and easy-processing featur....
Waterproof Durable Anti-denting Ceiling Tile For False Ceiling - By kamchung - On Monday 5 September 2022 8:39 am: calcium silicate board in size 595*595mm or 603*603mm it comes with a harmless coating on surface and selectable patterns due to the advantages of c....
Sincerely Seeking Agents Of Fiber Cement Sheet And Calcium Silicate Sheet Worldwide - By kamchung - On Monday 5 September 2022 8:45 am: calcium silicate board fiber cement board wood grain siding board super tile adhesive joint mixture sandwich panel gypsum board and composite st....
Sincerely Looking For Agents Of Fiber Cement Sheet, Calcium Silicate Sheet And Plaster Boar Worldwid - By Kamchungbuilding - On Thursday 18 August 2022 7:56 am: calcium silicate board and gypsum board around the world we will provide you good price and good quality products and together seize the market win-....
7-15mm Thick Gypsum Board In Size 1200 2400 Fast Delivery In Stock - By Kamchungbuilding - On Thursday 18 August 2022 7:36 am: ceiling board
6 light weight in unit acreage
application
ceiling wall panel etc
varieties
normal paper-faced gypsum board
fire-rated gypsum b....
Light Weight Ceiling Panel In Size 959 595mm And 603 603mm For Office And Apartment Fake Ceiling - By Kamchungbuilding - On Thursday 18 August 2022 8:22 am: calcium silicate board in size 595*595mm or 603*603mm it comes with a harmless coating on surface and selectable patterns due to the advantages of c....
Spike Roller Floor Decor Paint Tool Professional Levering Epoxy Floor Coating - By gsbpainttool - On Saturday 23 December 2023 6:53 am: floor preparation projects
premium construction our good quality spike roller is constructed with high-quality materials to ensure optimal performa....
Sg-e Automatic Thin And Thick Paper Uv Oil Varnishing Machine - By Jialite - On Monday 28 November 2022 8:09 am: sg-e automatic thin and thick paper uv oil varnishing machine
sg-e series uv oil coating machine which is suitable for the varnishing and polishing process of various paper 80-600g m² machine for water-based.... Import Export Startup Stories
Share Your Story & Get Listed at StartImportExport.com- Guangzhou Hi-Power Machine Co Ltd: Owen Zeng Of Guangzhou Hi-Power Machine, A Surface Preparation Equipment And Industrial Vacuum Cleaners From China
- Alfa Sourcing International Co Ltd: Nancy Of Alfa Sourcing International Helping Provide Purchasing Expertise And Services From China
- Birchhill Plywood China Xuzhou Inc: Steven Yin Of Birchhill Plywood, A Manufacturer And Exporter Of Plywood Products From China
- Xiamen Huaxinsheng Import And Export Co Ltd: Lynn Of Xiamen Huaxinsheng Import And Export, A Granite Manufacturer From China
- Shanghai Allstar Industrial Co., Ltd: Tony Tang Of Shanghai Allstar Industrial, A Manufacturer Of Various Cold Roll Forming Machines From China
Wallboard Classification Navigation
Main - Structures and Building and Construction and Manufacturing Components and Supplies - Interior finishing materials - Wall finishing materials - Wallboard [18]
TradersCity.com shall not be held liable for any user posted/submitted content including but not limited to trade leads, profiles, images, and any other data. TradersCity.com does not and did not verify any of users posted/submitted data nor is implicitly or explicitly recommending these business offers. TradersCity does not verify truthfulness, accuracy, completeness, nor legality of any businesses, services, and leads posted here. TradersCity does not represent Sellers or Buyers in any transaction between users of the website and is unable to make any opinion in regard to their performance in any transaction. TradersCity neither guarantees nor undertakes in any dispute between sellers and buyers. Protect your business from fraud by trading safely