-
- Trade Leads
- Trade Services
- B2B Directories
- Trade Connections
- Misc
- Contact Us
A free import export trade leads B2B marketplace since 1996 for manufacturers, suppliers, exporters, importers, buyers, sellers, wholesalers, freight forwarders, shippers, trade shows, exhibits, and export management.
Hello visitor from
USA - 157 visiting from 149 USA 
5 Belgium 
1 UK 
1 Brazil 
1 Germany
Hello visitor from
USA - 157 visiting from 149 USA 5 Belgium 1 UK 1 Brazil 1 Germany
Hydrotest Equipment
Posted at: Offers to Sell and Export | Posted on: Monday 18 January 2010 5:06 am | Poster last visit: Monday 18 January 2010 |
Product Description:
Hydro test pumps is a common procedure used to check fluid pressure vessel, such as, cylinders, boiler,
tubes pipe, valves, castings, components etc.. For more information please visit at our website
Hydrostatic pressure testing is also a common testing procedure to verify pressure vessels do not leak or have manufacturing flaws. Hydrotest pump is important for pressure vessels in the interest of device safety, and durability under operating pressure.
The pressure vessel to be tested is located within a sealed vessel. The sealed vessel is filled with an incompressible fluid, typically water or oil. The pressure test vessel is then subjected to a known internal pressure for a known duration. The known internal pressure is normally a significant percent greater than the maximum operating pressure of the device (typically 150%). The applied pressure causes the test vessel to expand, instrumentation, which is already in place, are then read to determine the total and permanent expansion that the test chamber (external) undergoes. A physical and visual inspection then follows the hydrostatic pressure test to determine that the device being tested has not been damaged or permanently distorted due to the test pressure.
Pressure vessels may be re-verified by subjecting the vessel device to a proof-pressure test. The proof-pressure test is commonly referred to as a "modified hydrostatic test". The pressure vessel is subjected to a known pressure for a predetermined time. During and following the proof-pressure test, the pressure vessel is inspected for abnormal distortion or failure.
PressureJet offers wide range of hydrostatic pump ranging from 1 lpm to 773 lpm and pressure up to 2800 bar. Hydraulic test pump is either electric motor driven or engine driven.
Pressure Jet also offers hydro test pumps with pre-filling cum pre-pressurizing cum pressure building system. For large volume of hydro test combine hydrostatic pressure testing unit is most preferred solution. This hydrotest pump is compact, efficient & cost effective, available in different combinations of pressure and flow. The unique automatic hydro test controller is a standard feature of this system. Otherwise also for large quantity, automatic hydrotest controller is very useful to improve productivity thru even a Kay man.
Though theoretically water is considered as non compressible fluid, it requires considerable amount of feeding to raise the pressure.
"How much water is to be injected to raise certain pressure?" and "What time will it take to reach up to desire pressure?" are typical questions, asked by majority customers who are inquiring about high pressure hydro test pumps. It depends upon the following
· Initial pressure from which we start feeding the water
· Total Volume of the equipment
· Required pressure for the testing
· Time available in minutes/ hours.
Customer should furnish the above information and leave it to us for the right selection of hydrostatic test pump.
We have wide range of hydraulic testing machine test at different test pressure!
We would like to inform you that Pressure Jet technical team is well trained to select right (here, optimum) hydro test pump for right application. Therefore, rest assured that they will never mislead you.
Automatic Pressure Controller
· This unit consists of continuous pressure sensing (CPS) device and set pressure regulator (SPR).
· The CPS monitors the actual pressure continuously as it is connected with discharge line of the pumping unit. There are two displays in the APC in which pressure can be read. In display one, actual pressure, sensed by the CPS, is being displayed and another display shows the test pressure which will be set thru a set pressure regulator (SPR), by the user.
· SPR can be adjusted from 0 to max. pressure range of APC, that can be anything from 20 bar to 2000 bar, as per customer s requirement.
· FUNCTION : CPS is integrated with SPR. CPS continuously read the actual pressure and SPR Continuously check CPS pressure. There is an electronic circuit, which stops electric motor or engine as soon as CPS pressure reaches to SPR pressure, which is set manually, as per the test pressure requirement.
advantages of automatic pressure controller
· Very compact and easy to install
· Safe and reliable
· Saves time with compare to manual process.
· Very precise
· Almost no chance of accident.
· Even a layman can operate. No skill is required as it requires in manual operation.
How to select right hydrostatic testing pump?
At the out set, please be noted that following parameters are important while selecting a hydrostatic hydrotest pump.
1. Pump flow rate
or
volume of equipment to be tested
2. Initial pressure from which we start feeding the water.
3. Required pressure for the testing.
4. Time available to carry out one test in minutes / hours. )
5. Frequency of tests. (Daily / weekly / monthly)
6. Selection of driver (electric motor, engine etc..)
FLOW RATE: If you have this information, then you can provide straightway to reduce communication.
or
volume of the equipment to be tested: it is our experience that due to lack of knowledge, several times, when customer informs flow rate of the pump, they also consider the filling up volume, which actually should not be considered. for the test of large volume size equipment, flow rate selection is found wrong. therefore, we suggest you to inform us the volume or size of the equipment to be hydro tested, to select optimum size of high pressure reciprocating plunger pump.you may also furnish your existing pump detail for better selection.
initial pressure from which we start pressurising for hydrotest: normally, all large volume hydro test jobs, filling pump is used to fill up the water. there is always some pressure at which pipelines are being filled up. this information is also important to know that how much pressure is to be raised ?
PRESSURE: Normally, customer should select 10 to 20% more pressure than required. Several times, customer thinks that higher pressure pump may be needed for future application. Based on that, they propose quite high pressure also. In such circumstances, you can surf our website thoroughly and select suitable model. There are many models, where price may be almost same for different pressure, only motor and other miscellaneous accessories will be changed and total cost impact may be too small e.g. If you select T2-15-10 model for 2 lpm / 125 kg/cm2/ 1 hp or if you select 1.6 lpm / 375 kg/cm2 / 2 hp, there may be hardly 10 to 15% price difference between 125 kg/cm2 and 375 kg/cm2 as the model is same.
Company Contact:
Contact Name: Hetal Shah
Company Name: Precidose Pumps & System
Email:
Tel: 91-79-25830762
Fax:
Street Address: 62/13, Phase – I,
Nr. Patels Airtemp, G.I.D.C., Vatva,
Ahmedabad – 382 445 India
Website: http://www.precidose.com
Member name: precidose
Country:
India
Member Since: 26 October 2009
Total Leads: 44 precidose Import Export Business Leads
Business focus: High Pressure Triplex Plunger Pump, Reciprocating Piston Pump, Hydrostatic Hydrotest Pump, Car Power Pressure Washer Pump, High Pressure Cleaners
Chat:
Verify: Safe Import Export Tips
tubes pipe, valves, castings, components etc.. For more information please visit at our website
Hydrostatic pressure testing is also a common testing procedure to verify pressure vessels do not leak or have manufacturing flaws. Hydrotest pump is important for pressure vessels in the interest of device safety, and durability under operating pressure.
The pressure vessel to be tested is located within a sealed vessel. The sealed vessel is filled with an incompressible fluid, typically water or oil. The pressure test vessel is then subjected to a known internal pressure for a known duration. The known internal pressure is normally a significant percent greater than the maximum operating pressure of the device (typically 150%). The applied pressure causes the test vessel to expand, instrumentation, which is already in place, are then read to determine the total and permanent expansion that the test chamber (external) undergoes. A physical and visual inspection then follows the hydrostatic pressure test to determine that the device being tested has not been damaged or permanently distorted due to the test pressure.
Pressure vessels may be re-verified by subjecting the vessel device to a proof-pressure test. The proof-pressure test is commonly referred to as a "modified hydrostatic test". The pressure vessel is subjected to a known pressure for a predetermined time. During and following the proof-pressure test, the pressure vessel is inspected for abnormal distortion or failure.
PressureJet offers wide range of hydrostatic pump ranging from 1 lpm to 773 lpm and pressure up to 2800 bar. Hydraulic test pump is either electric motor driven or engine driven.
Pressure Jet also offers hydro test pumps with pre-filling cum pre-pressurizing cum pressure building system. For large volume of hydro test combine hydrostatic pressure testing unit is most preferred solution. This hydrotest pump is compact, efficient & cost effective, available in different combinations of pressure and flow. The unique automatic hydro test controller is a standard feature of this system. Otherwise also for large quantity, automatic hydrotest controller is very useful to improve productivity thru even a Kay man.
Though theoretically water is considered as non compressible fluid, it requires considerable amount of feeding to raise the pressure.
"How much water is to be injected to raise certain pressure?" and "What time will it take to reach up to desire pressure?" are typical questions, asked by majority customers who are inquiring about high pressure hydro test pumps. It depends upon the following
· Initial pressure from which we start feeding the water
· Total Volume of the equipment
· Required pressure for the testing
· Time available in minutes/ hours.
Customer should furnish the above information and leave it to us for the right selection of hydrostatic test pump.
We have wide range of hydraulic testing machine test at different test pressure!
We would like to inform you that Pressure Jet technical team is well trained to select right (here, optimum) hydro test pump for right application. Therefore, rest assured that they will never mislead you.
Automatic Pressure Controller
· This unit consists of continuous pressure sensing (CPS) device and set pressure regulator (SPR).
· The CPS monitors the actual pressure continuously as it is connected with discharge line of the pumping unit. There are two displays in the APC in which pressure can be read. In display one, actual pressure, sensed by the CPS, is being displayed and another display shows the test pressure which will be set thru a set pressure regulator (SPR), by the user.
· SPR can be adjusted from 0 to max. pressure range of APC, that can be anything from 20 bar to 2000 bar, as per customer s requirement.
· FUNCTION : CPS is integrated with SPR. CPS continuously read the actual pressure and SPR Continuously check CPS pressure. There is an electronic circuit, which stops electric motor or engine as soon as CPS pressure reaches to SPR pressure, which is set manually, as per the test pressure requirement.
advantages of automatic pressure controller
· Very compact and easy to install
· Safe and reliable
· Saves time with compare to manual process.
· Very precise
· Almost no chance of accident.
· Even a layman can operate. No skill is required as it requires in manual operation.
How to select right hydrostatic testing pump?
At the out set, please be noted that following parameters are important while selecting a hydrostatic hydrotest pump.
1. Pump flow rate
or
volume of equipment to be tested
2. Initial pressure from which we start feeding the water.
3. Required pressure for the testing.
4. Time available to carry out one test in minutes / hours. )
5. Frequency of tests. (Daily / weekly / monthly)
6. Selection of driver (electric motor, engine etc..)
FLOW RATE: If you have this information, then you can provide straightway to reduce communication.
or
volume of the equipment to be tested: it is our experience that due to lack of knowledge, several times, when customer informs flow rate of the pump, they also consider the filling up volume, which actually should not be considered. for the test of large volume size equipment, flow rate selection is found wrong. therefore, we suggest you to inform us the volume or size of the equipment to be hydro tested, to select optimum size of high pressure reciprocating plunger pump.you may also furnish your existing pump detail for better selection.
initial pressure from which we start pressurising for hydrotest: normally, all large volume hydro test jobs, filling pump is used to fill up the water. there is always some pressure at which pipelines are being filled up. this information is also important to know that how much pressure is to be raised ?
PRESSURE: Normally, customer should select 10 to 20% more pressure than required. Several times, customer thinks that higher pressure pump may be needed for future application. Based on that, they propose quite high pressure also. In such circumstances, you can surf our website thoroughly and select suitable model. There are many models, where price may be almost same for different pressure, only motor and other miscellaneous accessories will be changed and total cost impact may be too small e.g. If you select T2-15-10 model for 2 lpm / 125 kg/cm2/ 1 hp or if you select 1.6 lpm / 375 kg/cm2 / 2 hp, there may be hardly 10 to 15% price difference between 125 kg/cm2 and 375 kg/cm2 as the model is same.
Company Contact:
Contact Name: Hetal Shah
Company Name: Precidose Pumps & System
Email:
Tel: 91-79-25830762
Fax:
Street Address: 62/13, Phase – I,
Nr. Patels Airtemp, G.I.D.C., Vatva,
Ahmedabad – 382 445 India
Website: http://www.precidose.com
Member name: precidose
Country:
IndiaMember Since: 26 October 2009
Total Leads: 44 precidose Import Export Business Leads
Business focus: High Pressure Triplex Plunger Pump, Reciprocating Piston Pump, Hydrostatic Hydrotest Pump, Car Power Pressure Washer Pump, High Pressure Cleaners
Chat:
Verify: Safe Import Export Tips
Similar Suppliers And Manufacturers Import Export Trade Leads
Arlit Filtration Equipment - By ARLIT - On Wednesday 1 March 2023 7:59 am: equipment co ltd was established in 2005 which specialized in liquid and air filtration equipment manufacturer our company has introduced the ad....
Guide Rail Equipment - By sonhopump - On Monday 3 April 2023 6:06 am: guide rail equipment
guide rail equipment
application
water drainage in basements of buildings sewage treatment tanks tunnels subways etc
specifications
1 su....
Lautering Equipment False Bottom - By YUBOFiltrationEquipment - On Thursday 13 October 2022 5:37 am: equipment is a concern for any brewery because saving time means saving money the lauter tun equipment is the core of the brewery the most effective....
Cattle Slaughter Abattoir Equipment - By EMEslaughterhouse - On Wednesday 5 October 2022 4:04 am: cattle slaughter abattoir equipment
i amp #12289 cattle abattoir slaughter operation brief introduction charter
1 amp #12289 living cattle collection unit
2 amp #12289 living cattl....
Industrial Equipment Wi-fi Router Board - By auslinxco - On Monday 13 June 2022 12:58 am: industrial equipment wi-fi router board
application canada farm monitoring system
the concept of iiot industrial internet of things has started to play an important role in the industr....
Tubular Stranding Equipment Use Bearing Z-503867 Zl - By jinshuobearing - On Thursday 20 July 2023 12:42 am: equipment which runs with high rotational speed and the bearing normal working at operating temperatures from –30 °c to +150 °c
bearing factory mod....
500l Craft Beer Brewing Equipment - By tekbrew - On Friday 17 March 2023 1:30 am: equipment system mainly including
malt milling system
brewhouse system
fermentation system
cooling system
controlling system
and auxiliary equi....
Reverse Osmosis Ro Water Treatment Equipment - By tekbrew - On Thursday 27 April 2023 12:13 pm: equipment is meet client’s requirements as following
1 raw water quality borehole water tds less than 2000ppm
2 output water application pure drink.... Import Export Startup Stories
Share Your Story & Get Listed at StartImportExport.com- Zhejiang Kepu Water Industry Co Ltd: Jacky Of Zhejiang Kepu Water Industry, A Piping Systems And Irrigation Equipments Supplier From China
- Mag Makina imalat: Mustafa Yildiz Of Mag Makina Imalat From Turkey For Marine, Automotive And Heavy Equipment Parts
- Nanjing Victory Storage Equipment Manufacturing Co Ltd: Jason Of Nanjing Victory Storage Equipment Manufacturing From China
- Denjoy Dental Co Ltd: Joanna Jiang Of Denjoy Dental Manufacturing Endodontic Equipment From China
- Coabesta Ad Co Ltd: Ruy Liu Of Coabesta AD Manufacturer Of Display Electronics And Equipments From China
TradersCity.com shall not be held liable for any user posted/submitted content including but not limited to trade leads, profiles, images, and any other data. TradersCity.com does not and did not verify any of users posted/submitted data nor is implicitly or explicitly recommending these business offers. TradersCity does not verify truthfulness, accuracy, completeness, nor legality of any businesses, services, and leads posted here. TradersCity does not represent Sellers or Buyers in any transaction between users of the website and is unable to make any opinion in regard to their performance in any transaction. TradersCity neither guarantees nor undertakes in any dispute between sellers and buyers. Protect your business from fraud by trading safely