-
- Trade Leads
- Trade Services
- B2B Directories
- Trade Connections
- Misc
- Contact Us
A free import export trade leads B2B marketplace since 1996 for manufacturers, suppliers, exporters, importers, buyers, sellers, wholesalers, freight forwarders, shippers, trade shows, exhibits, and export management.
Hello visitor from
USA - 56 visiting from 47 USA 
5 UK 
2 India 
1 Germany 
1 Ukraine
Hello visitor from
USA - 56 visiting from 47 USA 5 UK 2 India 1 Germany 1 Ukraine
Jw Worm Gear Screw Jacks
Posted at: Offers to Sell and Export | Posted on: Wednesday 15 June 2011 8:07 am | Poster last visit: Thursday 19 May 2016 |
Product Category: Main
» Manufacturing Components and Supplies
» Bearings and bushings and wheels and gears
» Gears
» Worm gears
» Jw Worm Gear Screw Jacks
Product Description:
NOSEN JW Worm Gear Screw Jacks Descriptions:
* 12 models are available RN-05T, RN-1T, RN-2T, RN-3T,
RN-5T, RN-10T, RN-15T, RN-20T, RN-30T, RN-40T, RN-50T, RN-100T.
* Used wherever precisely controlled lifting, lowering, pushing, pulling and rolling movements are required in an efficient and reliable operation. They can be flexibly configured, either being installed as single units, in pairs or multiple jacks systems and can be driven by electric or manually, fully synchronization.
* All versions are designed for both tensile and compressive loads and will operate in any orientation or mounting position.
* Speed of travel
1. Gear Ratio H (high speed)
Worm gear screw jacks with trapezoidal screw produce an advance of 1 mm for each revolution of the worm shaft. The linear speed is 1500 mm per min at 1500 rpm. Worm gear screw jacks with ball screws achieve between 1071 mm per min and 2124 mm per min, depending on size and lead.
2. Gear Ratio M (middle speed)
Worm gear screw jacks with trapezoidal screw produce an advance of 0.5 mm for each revolution of the worm shaft. The linear speed is 750 mm per min at 1500 rpm.
3. Gear Ratio L (low speed)
Worm gear screw jacks with trapezoidal screw produce an advance of 0.25 mm for each full revolution of the worm shaft. That is, the linear speed is 375 mm per min at 1500 rpm. Worm gear screw jacks with ball screws achieve between 312 mm per min and 535 mm per min, depending on size and lead.
Please note that higher speeds of travel can be achieved with larger screw pitches or multiple start screws. The worm gear screw jack’s maximum drive revolutions (standard grease lubrication) of 1800 rpm must not be exceeded. The higher efficiency of the ball screw drive also permits a longer duty cycle.
* Lateral Force
Usually, worm gear screw jack only loads lift screw axial loading, don’t permit to load any lateral force. Any lateral force will reduce screw jack working life, even damage screw jack. We suggest, lateral forces that may occur should be taken by an external guide rail.
* Self-locking functions
Absolutely irreversible, they can support their applied loads without needing any brakes or other locking systems.
The self-locking function depends on a variety of parameters: Large pitches, Different gear ratios, Lubrication, Friction parameters, Ambient influences( such as high or low temperatures), vibrations and The mounting position.
Ball screw with large pitches are consequently not self-locking. Suitable brakes or braking motors must therefore be considered in such cases. Limited self-locking can be assumed for smaller pitches (single-start).
* Anti-rotation devices
Single screw jack application, isn’t guided and without any guide rails, lift screw does not do linear motions, only rotation, especially light loading. If that is the case, need to extra add anti-rotation devices.
* Application Industries:
Precision lift table, Roll forming machines, Press machines, Tunnel Freezer, Surface-Gringing machines, Satellite dish antenna, Solar tracking system, Sluice gate, Theatre stage, Slitting line, Precision leveler, Powered straightener, Paper machines, Food processing machines, Textiles machines etc.
Company Contact:
Contact Name: Jack Kuang
Company Name: Nosen M&E Technology Co., Ltd
Email:
Tel: 86-769-85644651
Fax: 86-769-85644652
Street Address: Building F, Xinhaoyuan
Industrial Park, Xitou, Houjie, Dongguan,
Guangdong, China
Website: http://www.nosenjack.com
Member name: nosenkw
Country:
China
Member Since: 26 May 2009
Total Leads: 519 nosenkw Import Export Business Leads
Business focus: Screw Jack, Bevel Gearbox, Screw Jack System
Chat:
Verify: Safe Import Export Tips
* 12 models are available RN-05T, RN-1T, RN-2T, RN-3T,
RN-5T, RN-10T, RN-15T, RN-20T, RN-30T, RN-40T, RN-50T, RN-100T.
* Used wherever precisely controlled lifting, lowering, pushing, pulling and rolling movements are required in an efficient and reliable operation. They can be flexibly configured, either being installed as single units, in pairs or multiple jacks systems and can be driven by electric or manually, fully synchronization.
* All versions are designed for both tensile and compressive loads and will operate in any orientation or mounting position.
* Speed of travel
1. Gear Ratio H (high speed)
Worm gear screw jacks with trapezoidal screw produce an advance of 1 mm for each revolution of the worm shaft. The linear speed is 1500 mm per min at 1500 rpm. Worm gear screw jacks with ball screws achieve between 1071 mm per min and 2124 mm per min, depending on size and lead.
2. Gear Ratio M (middle speed)
Worm gear screw jacks with trapezoidal screw produce an advance of 0.5 mm for each revolution of the worm shaft. The linear speed is 750 mm per min at 1500 rpm.
3. Gear Ratio L (low speed)
Worm gear screw jacks with trapezoidal screw produce an advance of 0.25 mm for each full revolution of the worm shaft. That is, the linear speed is 375 mm per min at 1500 rpm. Worm gear screw jacks with ball screws achieve between 312 mm per min and 535 mm per min, depending on size and lead.
Please note that higher speeds of travel can be achieved with larger screw pitches or multiple start screws. The worm gear screw jack’s maximum drive revolutions (standard grease lubrication) of 1800 rpm must not be exceeded. The higher efficiency of the ball screw drive also permits a longer duty cycle.
* Lateral Force
Usually, worm gear screw jack only loads lift screw axial loading, don’t permit to load any lateral force. Any lateral force will reduce screw jack working life, even damage screw jack. We suggest, lateral forces that may occur should be taken by an external guide rail.
* Self-locking functions
Absolutely irreversible, they can support their applied loads without needing any brakes or other locking systems.
The self-locking function depends on a variety of parameters: Large pitches, Different gear ratios, Lubrication, Friction parameters, Ambient influences( such as high or low temperatures), vibrations and The mounting position.
Ball screw with large pitches are consequently not self-locking. Suitable brakes or braking motors must therefore be considered in such cases. Limited self-locking can be assumed for smaller pitches (single-start).
* Anti-rotation devices
Single screw jack application, isn’t guided and without any guide rails, lift screw does not do linear motions, only rotation, especially light loading. If that is the case, need to extra add anti-rotation devices.
* Application Industries:
Precision lift table, Roll forming machines, Press machines, Tunnel Freezer, Surface-Gringing machines, Satellite dish antenna, Solar tracking system, Sluice gate, Theatre stage, Slitting line, Precision leveler, Powered straightener, Paper machines, Food processing machines, Textiles machines etc.
Company Contact:
Contact Name: Jack Kuang
Company Name: Nosen M&E Technology Co., Ltd
Email:
Tel: 86-769-85644651
Fax: 86-769-85644652
Street Address: Building F, Xinhaoyuan
Industrial Park, Xitou, Houjie, Dongguan,
Guangdong, China
Website: http://www.nosenjack.com
Member name: nosenkw
Country:
ChinaMember Since: 26 May 2009
Total Leads: 519 nosenkw Import Export Business Leads
Business focus: Screw Jack, Bevel Gearbox, Screw Jack System
Chat:
Verify: Safe Import Export Tips
Similar Suppliers And Manufacturers Import Export Trade Leads
25inch Cooper Worm Gear Single Worm Shaft Slewing Drive Hse25 Has High Speed For Heavy Machine - By UniqueTransmission - On Sunday 13 March 2022 11:00 am: worm gear slewing drive high speed self-locking
color according to customers requirements
service design manufacturing customized
21inch Double Worm Shaft Worm Gear Slewing Drive Slew Drive Se21-2 For Excavator And Heavy Equipment - By UniqueTransmission - On Monday 14 March 2022 7:54 am: worm gear slewing drive low speed self-locking
color according to customers requirements
service design manufacturing customized
slewing dr....
Double Worm Shaft Cooper Worm Gear Slewing Drive Hse25-2 25inch Slew Drive For Drilling Machine - By UniqueTransmission - On Sunday 13 March 2022 11:08 am: worm gear slewing drive high speed self-locking
ip grade ip65
color according to customers requirements
service design manufacturing custo....
17inch Worm Gear Slewing Drive Double Worm Shaft Drive Without Housing S17-2 - By UniqueTransmission - On Monday 14 March 2022 7:59 am: worm gear slewing drive low speed self-locking
color according to customers requirements
service design manufacturing customized
unique tra....
14inch High Accuracy Worm Gear Slew Drive Pe14 - By UniqueTransmission - On Wednesday 26 July 2023 3:42 am: worm gear slewing drive low speed self-locking
ip grade ip65
color according to customers requirements
service design manufacturing custom....
Se17 Worm Gear Slewing Drives With Flanges For Vertical Installation - By UniqueTransmission - On Thursday 24 March 2022 10:51 am: worm gear slewing drives for vertical installation
model se17
type customized adapter flange slewing drive
slewing drive gear ratio 102
rated o....
Our 9inch Worm Gear Slewing Drive Hse9 Can Withstand Heavy Load - By UniqueTransmission - On Friday 21 July 2023 3:28 am: worm heavy duty high speed worm gear slewing drive
slewing drive gear ratio 62 1
rated output torque 8kn m
rotation center diameter 229mm
total....
Our Underwater Use Worm Gear Slewing Drive Wp9 Can Withstand 2mpa Pressure - By UniqueTransmission - On Friday 21 July 2023 3:35 am: worm gear slewing drive of the unique transmission includes two categories cylindrical worms and envelope worms the cylindrical worms are suitable f.... Import Export Startup Stories
Share Your Story & Get Listed at StartImportExport.com- Nosen Mechanical & Electrical Equipment Co., Ltd: Jack Kuang Of Nosen Mechanical And Electrical Equipment From China
- Shenzhen RiOu Refrigeration Machine Equipment Co Ltd: Vivian Hu Of Shenzhen RiOu Refrigeration Machine Equipment Company From China
- Tianjin Shengjintai Steel and Iron Co Ltd: Eire Guo Of Tianjin Shengjintai Steel and Iron From China
Worm gears Classification Navigation
Main - Manufacturing Components and Supplies - Bearings and bushings and wheels and gears - Gears - Worm gears [218]
TradersCity.com shall not be held liable for any user posted/submitted content including but not limited to trade leads, profiles, images, and any other data. TradersCity.com does not and did not verify any of users posted/submitted data nor is implicitly or explicitly recommending these business offers. TradersCity does not verify truthfulness, accuracy, completeness, nor legality of any businesses, services, and leads posted here. TradersCity does not represent Sellers or Buyers in any transaction between users of the website and is unable to make any opinion in regard to their performance in any transaction. TradersCity neither guarantees nor undertakes in any dispute between sellers and buyers. Protect your business from fraud by trading safely