Product Description:
LG type high-rise building feeding water pump is vertical single suction multi-stage stage centrifugal
pump. LG high-building feeding water pump is used to transport water at normal temperature and other liquids with physical and chemical properties similar to clean water.
LG vertical multistage feeding water pump is for vertical installation, the motor shaft and the pump shaft is connected by jaw coupling and the pump has the advantages of compact structure, low noise, cover an area of an area small. LG Vertical multistage pump is mainly used in high-rise building water supply, water supply and drainage. The pump can also be used in factories and mines, enterprises, and low pressure boiler water circulation.
LG is vertical, single suction and multi-stage segmental type, the demountable type centrifugal pump. The suction and discharge are on the inlet and outlet section respectively. The rotor part is composed of shaft, impeller, impeller block sleeve, shaft sleeve and other parts. The inlet section, middle section and outlet section are connected by tightening bolts. The shaft seal adopts soft packing seal or mechanical seal and is lubricated and cooled by pressure water in the balance chamber. LG series vertical, single-suction, multistage sectional-type, detachable centrifugal pump. Its suction and discharge outlets are located in the inlet and outlet sections.
Application range of LG high - rise water pump
LG type vertical multi-stage centrifugal pump is especially suitable for supporting pumps of constant pressure water supply, fire fighting and spraying water supply equipment in high-rise buildings such as residential buildings, hotels and office buildings. It is also suitable for automatic water replenishment of cooling tower in chemical process. System stable pressure, circulating water for production process, long-distance transportation, boiler water supply and other water supply equipment. The pumped liquid is clean water with normal temperature (less than 80 degree Celsius)(hot water type can transport liquids with temperature iless than 105 degrees media) and other liquids with physical, chemical properties similar to water.
LG type tall building feed water pump product characteristic
1, low pump cost: the use of high speed motor, so that the series of pumps with light weight, small volume, low cost features, such as protective cover can be placed in the outdoor use.
2, less operation and maintenance costs: adopt reliable mechanical seal, low failure rate, with less operation and maintenance costs.
3. This series of pumps adopts the detachable structure, which is convenient for users to replace the vulnerable parts such as mechanical seals. It is convenient for installation and maintenance, and there is no need to remove the pipeline system. The inlet and outlet of the pump are of the same diameter, which simplifies the connection of pipelines.
4. The series and parallel operation mode of pumps can be adopted according to the needs of flow and head.
5. According to requirements, the suction inlet and the discharge outlet can be installed in the same direction or 90°, 180° and 270° in different directions to meet different connection occasions.
6. Pump head can be increased or decreased according to requirements and can be satisfied with the outside diameter of cutting impeller without changing the installation area.
7. Novel structure and reliable operation: the balanced drum (plate) is eliminated, and its axial force adopts hydraulic balance, which completely solves the problems of easy corrosion, easy to bite and easy to wear, ensuring more reliable operation.
8, unique components, reduce noise: unique hydraulic components design, good flow performance, the earth to reduce flow noise.
LG - type high-rise building water pump model significance
65 lg36-20 * 3
65- pump inlet diameter (mm)
LG- vertical multi-stage feeding water pump
36-design point flow (m3/h)
20- design point single stage impeller head (m)
3 - pump stages
Speed:2950rpm
Company Contact:
Contact Name: Mrs. Shine Xin
Company Name: Kenshine Pump And Valve Mfg. Co., Ltd.
Email:
Tel: 86-21-33592713
Fax: 86-21-33592713
Street Address: Yindu Road 1535,
Xinzhuang Industrial Zone, Minhang
District, Shanghai, China
Other Contact Info:
Email:
Msn:
Yahoo:
Mobile: 8617721077977
Skype: Shinexin36
Website:
http://www.kenshine-pump.com
Member name: kenshinepump
Country:
China
Member Since: 01 August 2011
Total Leads:
149 kenshinepump Import Export Business Leads
Business focus: Pump, Centrifugal Pump, Water Pumps, Industrial Pump, Magnetic Pump, Diaphragm Pump, Self Priming Pump, Sewage Pump, Gear Pump, Multistage Pump, Hydraulic Pump
Chat:
Verify:
Safe Import Export Tips