-
- Trade Leads
- Trade Services
- B2B Directories
- Trade Connections
- Misc
- Contact Us
A free import export trade leads B2B marketplace since 1996 for manufacturers, suppliers, exporters, importers, buyers, sellers, wholesalers, freight forwarders, shippers, trade shows, exhibits, and export management.
Hello visitor from
USA - 87 visiting from 80 USA 
4 Belgium 
2 UK 
1 Palestine
Hello visitor from
USA - 87 visiting from 80 USA 4 Belgium 2 UK 1 Palestine
Liquid Silicone Adhesive For Pet Special Silicone Adhesive For Pet
Posted at: Offers to Sell and Export | Posted on: Wednesday 8 January 2014 5:55 am | Poster last visit: Tuesday 16 July 2019 |
Product Category: Main
» Manufacturing Components and Supplies
» Adhesives and sealants
» Adhesives
» Silicone adhesive
» Liquid Silicone Adhesive For Pet Special Silicone Adhesive For Pet
Product Description:
Special Silicone Adhesive for PET
kl-2620a/b
KL-2620A/B is two components compound. Heat and fast cured
type for silicone rubber. The cured silicone adhesive has a good adhesion to stick with PET base material and improving the surface Stripping Resistance.
The silicone adhesives are characterized by good leveling property, electrical insulating property, high grade of transparency and easy to clean with water.Applied to the computer display screen, mobile phone PET film, silicone protective film and screen protector.
Physical Properties:
Appearance： Clear colloid
Viscosity： 50000mpa.s
Solid Content： 65%
Curing Condition: TC10：19S*130℃
Tc90：42s*130℃
Stored Condition: Room temperature
Tensile Strength： 1.81Mpa
Elongation at Break： 929%
Tear Resistance： 2.4KN/m2
Surface Stripping Resistance at 180℃: 5G/25mm (ASTM D333)
Light Transmittance: 92%
Refractive Index: 1.41
Application ratio: A:B:Solvent=10:8:10(Weight)
Application Method:
1.Mixing uniformity A and B with solvent by a ratio of A:B:Solvent=10:8:10.
Taking material according to proportion, first mix B material and solvent evenly, and then mixed with A material evenly.
3. Defoaming treatment with vacuum by requirements. Coating uniformity of silicone adhesive on the silicone or PET film surface by coating method.
4. Baking at 130℃ for 54 seconds by IR strip.
Matters need attention:
1. The application ratio should be adjusted appropriate to different materials, the thickness of coating and weather conditions (temperature and humidness). The application ratio should better increase 5%~10% based raw ratio at hot and humid conditions.
2. Cleaning base materials and keep it dry, free of dust and oil.
3. Controlling and checking the viscosity during the coating process. Pay attention to the quantity for once and make it deeply cured.
4. Keep in a good and suitable condition for coating. The working shop should be dust-free at 25～35℃ and humidity controlled in 15 ~ 60%. Much over dust will cause NG products, Low over temperature will cause bad levelling property and adhesion strength, Large over humidity will cause shrinkage cavity of film. Low over humidity will cause potential safety hazard and whity by static.
5 .The mixed silicone adhesive should be used up within 1 hour, if high viscosity happens, stop coating at once.
6. The work shop should be ventilated and workers should wear labour protection tools during the coating process. Away from open flame, high temperature and pay attention to static electricity.
7. Please read the product safety instructions before using.
Storage: Stored at room temperature for 6 months without mixing.
Packing: 20KG/Barrel、50KG/Barrel
Company Contact:
Contact Name: Michael Liu
Company Name: Shenzhen Kanglibang Science & Technology Co., Ltd
Email:
Tel: +0086-138 2374 7978
Fax: +0086-138 -2374 -7978
Street Address: H Building, The 3rd
Industry Park, Xin Wei, Dalang
Street, Baoan District, Shenzhen
City, 518109 Shenzhen, Guangdong
518109 China
Member name: siliconeink
Country:
China
Member Since: 08 January 2014
Total Leads: 28 siliconeink Import Export Business Leads
Business focus: Silicone Screen Printing Inks, Silicone Pad Printing Inks, Rtv Silicone Rubber Adhesive
Chat:
Verify: Safe Import Export Tips
kl-2620a/b
KL-2620A/B is two components compound. Heat and fast cured
type for silicone rubber. The cured silicone adhesive has a good adhesion to stick with PET base material and improving the surface Stripping Resistance.
The silicone adhesives are characterized by good leveling property, electrical insulating property, high grade of transparency and easy to clean with water.Applied to the computer display screen, mobile phone PET film, silicone protective film and screen protector.
Physical Properties:
Appearance： Clear colloid
Viscosity： 50000mpa.s
Solid Content： 65%
Curing Condition: TC10：19S*130℃
Tc90：42s*130℃
Stored Condition: Room temperature
Tensile Strength： 1.81Mpa
Elongation at Break： 929%
Tear Resistance： 2.4KN/m2
Surface Stripping Resistance at 180℃: 5G/25mm (ASTM D333)
Light Transmittance: 92%
Refractive Index: 1.41
Application ratio: A:B:Solvent=10:8:10(Weight)
Application Method:
1.Mixing uniformity A and B with solvent by a ratio of A:B:Solvent=10:8:10.
Taking material according to proportion, first mix B material and solvent evenly, and then mixed with A material evenly.
3. Defoaming treatment with vacuum by requirements. Coating uniformity of silicone adhesive on the silicone or PET film surface by coating method.
4. Baking at 130℃ for 54 seconds by IR strip.
Matters need attention:
1. The application ratio should be adjusted appropriate to different materials, the thickness of coating and weather conditions (temperature and humidness). The application ratio should better increase 5%~10% based raw ratio at hot and humid conditions.
2. Cleaning base materials and keep it dry, free of dust and oil.
3. Controlling and checking the viscosity during the coating process. Pay attention to the quantity for once and make it deeply cured.
4. Keep in a good and suitable condition for coating. The working shop should be dust-free at 25～35℃ and humidity controlled in 15 ~ 60%. Much over dust will cause NG products, Low over temperature will cause bad levelling property and adhesion strength, Large over humidity will cause shrinkage cavity of film. Low over humidity will cause potential safety hazard and whity by static.
5 .The mixed silicone adhesive should be used up within 1 hour, if high viscosity happens, stop coating at once.
6. The work shop should be ventilated and workers should wear labour protection tools during the coating process. Away from open flame, high temperature and pay attention to static electricity.
7. Please read the product safety instructions before using.
Storage: Stored at room temperature for 6 months without mixing.
Packing: 20KG/Barrel、50KG/Barrel
Company Contact:
Contact Name: Michael Liu
Company Name: Shenzhen Kanglibang Science & Technology Co., Ltd
Email:
Tel: +0086-138 2374 7978
Fax: +0086-138 -2374 -7978
Street Address: H Building, The 3rd
Industry Park, Xin Wei, Dalang
Street, Baoan District, Shenzhen
City, 518109 Shenzhen, Guangdong
518109 China
Member name: siliconeink
Country:
ChinaMember Since: 08 January 2014
Total Leads: 28 siliconeink Import Export Business Leads
Business focus: Silicone Screen Printing Inks, Silicone Pad Printing Inks, Rtv Silicone Rubber Adhesive
Chat:
Verify: Safe Import Export Tips
Similar Suppliers And Manufacturers Import Export Trade Leads
Factory Price Good Quality Rtv2 Moldmaking Tin Liquid Cured Silicone Rubber Lsr Raw Materials Compou - By DonggyanGTSiliconeRubber - On Thursday 11 August 2022 9:37 am: liquid silicone rubber vulcanized under room temperature rtv-2
applications
condensation cured silicone rubber has extensive use such as mold mak....
Fda Medical Grade Soft Rtv2 Moldmaking Platinum Cured Liquid Silicone Rubber Lsr Raw Materials Compo - By DonggyanGTSiliconeRubber - On Thursday 11 August 2022 9:32 am: liquid silicone rubber vulcanized under room temperature rtv-2
applications
addition cured silicone rubber has extensive use such as mold making ....
Selling Jade Pet Resin, Pet Polyster Chips Granules Cz-302 - By greatwall - On Friday 26 August 2022 2:54 am: pet resin textile grade pet chips for yarn and fiber
selling jade pet resin pet polyster chips granules cz-302
pet plastic is polyethylene terep....
Mitsui Chemicals Admer Adhesive Resin Gt6 / Gt7 / Admer Adhesive Granules Pellets Particles Nf528, N - By greatwall - On Friday 26 August 2022 3:27 am: adhesive resin gt6 gt7 admer adhesive granules pellets particles nf528 nf527
we large supply mitsui chemicals admer adhesive resin gt6 gt7 and nf....
Adhesive Tape - By yidugroup - On Thursday 2 February 2023 8:47 am: adhesive tape
feature
plastic package tape
high quality
strong adhesion for sealing
easy to operate
multi-application
specification
ye-01 1 88 in x 60 ya....
Nail Free Adhesive - By raywincoating - On Friday 27 October 2023 3:00 am: adhesive is a kind of solvent-free neoprene glue strong adhesion strong durability can be filled heat resistant moisture-proof nail free adhesiv....
Self Adhesive Pp Synthetic Paper - By yidugroup - On Thursday 2 February 2023 8:41 am: pet pvc
2 size 24” x 30m 36” x 30m 42” x 30m 50” x 30m 60” x 30m
3 core size 2” core
Multipurpose Spray Adhesive - By DayangAerosol - On Saturday 22 July 2023 9:27 am: adhesive is suitable for bonding all kinds of light materials such as paper fabric foam plastic acrylic etc especially in composites applications.... Import Export Startup Stories
Share Your Story & Get Listed at StartImportExport.com- Ouken Rubber Co Ltd: Sean Liu Of Ouken Rubber Producing Molded Rubber Parts From China
Silicone adhesive Classification Navigation
Main - Manufacturing Components and Supplies - Adhesives and sealants - Adhesives - Silicone adhesive [10]
TradersCity.com shall not be held liable for any user posted/submitted content including but not limited to trade leads, profiles, images, and any other data. TradersCity.com does not and did not verify any of users posted/submitted data nor is implicitly or explicitly recommending these business offers. TradersCity does not verify truthfulness, accuracy, completeness, nor legality of any businesses, services, and leads posted here. TradersCity does not represent Sellers or Buyers in any transaction between users of the website and is unable to make any opinion in regard to their performance in any transaction. TradersCity neither guarantees nor undertakes in any dispute between sellers and buyers. Protect your business from fraud by trading safely