-
- Trade Leads
- Trade Services
- B2B Directories
- Trade Connections
- Misc
- Contact Us
A free import export trade leads B2B marketplace since 1996 for manufacturers, suppliers, exporters, importers, buyers, sellers, wholesalers, freight forwarders, shippers, trade shows, exhibits, and export management.
Hello visitor from
USA - 71 visiting from 30 USA 
21 Brazil 
13 Canada 
2 UK 
1 Chile 
1 Hong Kong 
1 Algeria 
1 Tunisia 
1 Azerbaijan
Hello visitor from
USA - 71 visiting from 30 USA 21 Brazil 13 Canada 2 UK 1 Chile 1 Hong Kong 1 Algeria 1 Tunisia 1 Azerbaijan
Oem Aluminum Hydraulic Oil Radiator For Excavator
Posted at: Offers to Sell and Export | Posted on: Monday 17 January 2022 8:08 am | Poster last visit: Friday 11 February 2022 |
Product Category: Main
» Distribution and Conditioning Systems and Equipment and Components
» Heating and ventilation and air circulation
» Cooling equipment and parts and accessories
» Unit cooler
» Oem Aluminum Hydraulic Oil Radiator For Excavator
Product Description:
Characteristics of oil cooler (classification introduction):
1, Water cooled oil cooler uses water as
a medium and oil for heat exchange, the advantage is that the cooling effect is better, can meet the requirements of low oil temperature (the oil temperature can be reduced to about 40 degrees Celsius, the disadvantage is that it must be used in places where there is water.
2, Air cooled oil cooler heat exchange with air as medium and oil, and some advantages in the air as the cooling source, basically not limited use, and environmental protection, the disadvantage is that due to the influence of environment temperature, the temperature is high, can't make the oil temperature down to an ideal temperature (air-cooled generally difficult to reduce the oil temperature to higher temperature only 5 ~ 10 ℃).
Issues that need attention
Plate type or corrugated type should be based on the actual needs of heat exchange occasions. In the case of large flow rate and small allowable pressure drop, the plate with small resistance should be selected, and the plate with large resistance should be selected on the contrary. According to the fluid pressure and temperature, determine the choice of removable or brazed type. When determining the plate type, it is not appropriate to choose the plate with too small area, so as not to have too many plates, small flow rate between plates and too low heat transfer coefficient. For larger heat exchangers, attention should be paid to this problem.
The flow refers to a set of parallel flow channels in the same flow direction of a medium in the plate heat exchanger, and the flow channel refers to the medium flow channel composed of two adjacent plates in the plate heat exchanger. In general, several flow channels are connected in parallel or series to form different combinations of cold and hot medium channels.
The process combination form should be calculated according to heat transfer and fluid resistance and determined under the requirements of process conditions. Try to make the convective heat transfer coefficients in the cold and hot water channels equal or close, so as to get the best heat transfer effect. Because when the convection heat transfer coefficients on both sides of the heat transfer surface are equal or close to each other, the heat transfer coefficient gets a larger value. Although the flow rate between the plates of plate heat exchanger is different, the average flow rate is still used to calculate the heat transfer and fluid resistance. Because the "U" shaped single flow nozzles are fixed on the compression plate, convenient disassembly and assembly.
In the design and selection of plate heat exchanger, generally there are certain requirements for pressure drop, so it should be checked. If the pressure drop exceeds the allowable pressure drop, it is necessary to re-calculate the design selection until the process requirements are met.
Folding oil cooling properties
1, wide heat transfer area: the heat transfer tube of the cooler adopts the design of copper pipe thread, and its contact area is wide, so the heat transfer effect is higher than the general smooth heat transfer tube.
2, good heat transfer: this series of copper tube is made of copper tube directly rotary burning processing, so that the heat transfer tube integration, so the heat transfer is good and true, no solder joint falling off resulting in poor heat transfer.
3. Suitable for large flow: the number of heat transfer tubes is reduced, the smooth area of oil is increased, and the loss of pressure is prevented. It is equipped with baffle to guide the flow, which can produce bending flow, increase the flow and play an effective role.
Company Contact:
Contact Name: Harrison
Company Name: Wuxi Jiusheng Heat Exchanger Co., Ltd.
Email:
Tel: +86 18206171482
Fax:
Street Address: Room 2313 No.8
Tianshan Road, High-tech Zone,
Wuxi City, Jiangsu Province 214000
China
Website: https://www.aluminumheatexchanger.com/
Member name: JiushengHeatExchanger
Country:
China
Member Since: 13 October 2021
Total Leads: 22 JiushengHeatExchanger Import Export Business Leads
Business focus: Automobile Intercooler, Air Compressor, Construction Machinery Hydraulic Oil Cooler, Agricultural Machine Oil Cooler
Chat:
Verify: Safe Import Export Tips
1, Water cooled oil cooler uses water as
a medium and oil for heat exchange, the advantage is that the cooling effect is better, can meet the requirements of low oil temperature (the oil temperature can be reduced to about 40 degrees Celsius, the disadvantage is that it must be used in places where there is water.
2, Air cooled oil cooler heat exchange with air as medium and oil, and some advantages in the air as the cooling source, basically not limited use, and environmental protection, the disadvantage is that due to the influence of environment temperature, the temperature is high, can't make the oil temperature down to an ideal temperature (air-cooled generally difficult to reduce the oil temperature to higher temperature only 5 ~ 10 ℃).
Issues that need attention
Plate type or corrugated type should be based on the actual needs of heat exchange occasions. In the case of large flow rate and small allowable pressure drop, the plate with small resistance should be selected, and the plate with large resistance should be selected on the contrary. According to the fluid pressure and temperature, determine the choice of removable or brazed type. When determining the plate type, it is not appropriate to choose the plate with too small area, so as not to have too many plates, small flow rate between plates and too low heat transfer coefficient. For larger heat exchangers, attention should be paid to this problem.
The flow refers to a set of parallel flow channels in the same flow direction of a medium in the plate heat exchanger, and the flow channel refers to the medium flow channel composed of two adjacent plates in the plate heat exchanger. In general, several flow channels are connected in parallel or series to form different combinations of cold and hot medium channels.
The process combination form should be calculated according to heat transfer and fluid resistance and determined under the requirements of process conditions. Try to make the convective heat transfer coefficients in the cold and hot water channels equal or close, so as to get the best heat transfer effect. Because when the convection heat transfer coefficients on both sides of the heat transfer surface are equal or close to each other, the heat transfer coefficient gets a larger value. Although the flow rate between the plates of plate heat exchanger is different, the average flow rate is still used to calculate the heat transfer and fluid resistance. Because the "U" shaped single flow nozzles are fixed on the compression plate, convenient disassembly and assembly.
In the design and selection of plate heat exchanger, generally there are certain requirements for pressure drop, so it should be checked. If the pressure drop exceeds the allowable pressure drop, it is necessary to re-calculate the design selection until the process requirements are met.
Folding oil cooling properties
1, wide heat transfer area: the heat transfer tube of the cooler adopts the design of copper pipe thread, and its contact area is wide, so the heat transfer effect is higher than the general smooth heat transfer tube.
2, good heat transfer: this series of copper tube is made of copper tube directly rotary burning processing, so that the heat transfer tube integration, so the heat transfer is good and true, no solder joint falling off resulting in poor heat transfer.
3. Suitable for large flow: the number of heat transfer tubes is reduced, the smooth area of oil is increased, and the loss of pressure is prevented. It is equipped with baffle to guide the flow, which can produce bending flow, increase the flow and play an effective role.
Company Contact:
Contact Name: Harrison
Company Name: Wuxi Jiusheng Heat Exchanger Co., Ltd.
Email:
Tel: +86 18206171482
Fax:
Street Address: Room 2313 No.8
Tianshan Road, High-tech Zone,
Wuxi City, Jiangsu Province 214000
China
Website: https://www.aluminumheatexchanger.com/
Member name: JiushengHeatExchanger
Country:
ChinaMember Since: 13 October 2021
Total Leads: 22 JiushengHeatExchanger Import Export Business Leads
Business focus: Automobile Intercooler, Air Compressor, Construction Machinery Hydraulic Oil Cooler, Agricultural Machine Oil Cooler
Chat:
Verify: Safe Import Export Tips
Similar Suppliers And Manufacturers Import Export Trade Leads
Ad3e301-02d03v / -w Eh Oil Hydraulic Unit Pressure Switch Inlet Outlet Strainer Oil Filter Wrench - By DongfangYoyik - On Thursday 14 July 2022 12:52 am: hydraulic unit pressure switch inlet outlet strainer oil filter wrench for turbine generator parts
is to use the generator sets of professional power....
Pc78 Pc88 Komatsu Excavator Hydraulic Pump - By machineryengine - On Friday 15 September 2023 1:35 am: hydraulic pump
product description
the komatsu pc78 and pc88 excavator hydraulic pump is one of the most efficient cost-effective and reliable hydr....
Roots Blower Metric Thread M27x1.5 Aluminum Oil Level Sight Glass Window - By grandmfgcn - On Tuesday 26 July 2022 11:27 am: aluminum oil level indicator sight glas plugs
body material aluminum brass pc ppma and steel
glass real glass 2 mm to 5 mm thickness
o ring ....
M22x1.5 M20x1.5 Aluminum Oil Sigth Glass Window Plug Wihstand High Pressure To 5mpa - By grandmfgcn - On Tuesday 26 July 2022 11:22 am: aluminum oil level sight glass indicator plugs
material body aluminum 6061 t6 aluminum 6063
finish aluminum natural and aluminum oxidized color ....
Grandmfg Bsp 1 And Metirc Thread Aluminum Oil Level Sight Glass Window Indicator Plug For Compressor - By grandmfgcn - On Monday 25 July 2022 10:01 am: aluminum oil level sight glass window indicator plugs
material body aluminum 6061 t6 aluminum 6063
finish aluminum natural and aluminum oxidized....
Hq25.200.11z Oil Filter Element Hydraulic Filter Brands For India Power System - By DongfangYoyik - On Thursday 14 July 2022 12:53 am: hydraulic filter brands for india power system
deyang yoyik is a strong technical force first-class product quality brand reputable large-scale mec....
China Supply Hc8314fkp39h 5 Micron Hydraulic Filter Sealing Oil System Filter Element For Pacitcan - By DongfangYoyik - On Monday 8 May 2023 12:52 am: hydraulic filter sealing oil system filter element for pacitcan tpp material
deyang yoyik skill is strong the production of strict accordance with n....
Yoyik Offer Hq25.200.11z Hydraulic Filter Breather Eh Oil Tank Inner Filter For Vietnam Power - By DongfangYoyik - On Friday 12 May 2023 12:37 am: hydraulic filter breather eh oil tank inner filter for vietnam power station
is yoyik for the use of units of the power plant supporting professional.... Import Export Startup Stories
Share Your Story & Get Listed at StartImportExport.com- Shanghai Minjian Aluminum Co Ltd: Don Yang Of Shanghai Minjian Aluminum From China
- ALAKS Aluminyum: Ammar Meshhadi Of ALAKS Aluminyum, A leader in aluminum door and window accessories sector From Turkey
- Kornik Export Company: Ekambi Pramarasse Of Kornik Export Company From Thailand
- Prelead Industy Co Ltd: Norman Cao Of Prelead Industry, A Trading Company Specializing In Industrial And Electrical Products And Plastic Injection Molding From China
- Guangzhou Kinggreat Trading Ltd: Emma Lee Of Guangzhou Kinggreat Trading An Electronic Products And Accessories Supplier From China
Unit cooler Classification Navigation
Main - Distribution and Conditioning Systems and Equipment and Components - Heating and ventilation and air circulation - Cooling equipment and parts and accessories - Unit cooler [3]
TradersCity.com shall not be held liable for any user posted/submitted content including but not limited to trade leads, profiles, images, and any other data. TradersCity.com does not and did not verify any of users posted/submitted data nor is implicitly or explicitly recommending these business offers. TradersCity does not verify truthfulness, accuracy, completeness, nor legality of any businesses, services, and leads posted here. TradersCity does not represent Sellers or Buyers in any transaction between users of the website and is unable to make any opinion in regard to their performance in any transaction. TradersCity neither guarantees nor undertakes in any dispute between sellers and buyers. Protect your business from fraud by trading safely