Product Description:
Surtek 3356
1-C Polyurethane Solvent Free Fast Cure Adhesive Sealant
Description
Surtek 3356 is a
one component, moisture-curable solvent free polyurethane adhesive sealant. It is non-sag, fast cure, of high bonding strength with primer. And it has good vibration and weather resistance. The product is manufactured in accordance with ISO9001/ISO14001/TS16949.
Characteristics
One component, easy to apply
Non-sagging
Fast cure
Solvent free
High strength use with primer
Good weather resistance, vibration and fatigue resistance
Technical data
Appearance Uniform Paste
Color Black
Density 1.25 ± 0.05 kg/l
Tack-free time* 15~35 min
Rate of cure* ≥3 mm/24 hrs
Work temperature 5-35°C
Shore A hardness ~ 60
Tensile strength ≥6 N/mm2
Elongation at break ~ 300%
Shear strength ≥4 N/ mm2
Tear strength ≥10 N/ mm
Service temperature (continuous)
Short – term (up to 48 hrs) -40°C to +90°C
130°c
*= at 23°C and 50% relative humidity
Uses
Surtek 3356 is used for windshield bonding, bus body bonding, and other high-strength request bonding and gap filling. It should be used together with Comens Primer or Activator.
Application Note
1. Clean surface to make it clean, dry, free of oil or grease.
2. Apply the Comensflex Activator or Comensflex Primer on the surface.
3. The sealant cures with the moisture in the air. The lower the temperature and humidity is, the slower the curing is; and the higher the temperature and humidity is, the faster the curing is.
4. The suggested work temperature is 5-35°C, the best work temperature is 15-25°C.
Property of the Sealant Layer
1. The product cures with the moisture in the air, which forms a high strength elastic structural sealant layer.
2. The sealant layer is resistant to water, weak acid, neutral cleaner which do not contain chlor-alkali. It can shortly resistant to fuel, oil, fat, and crude oil. But it should be avoided strong acid, lye, bleach and other organic solvent.
3. The sealant layer can be trimmed before curing. But after curing, it can only be removed by cutters.
Packaging
310ml/cartridge, 600ml/sausage
Storage
When stored at the recommended conditions in original, unopened containers, this product has a shelf life of 9 months (cartridge), 6 months (sausage).
The shelf life of polyurethane sealant is related to the temperature and humidity of the environment. The recommended storage temperature is 5-25°C, humidity is <50% RH. It is strictly prohibited that the transportation or storage temperature is over 30°C or the humidity is over 80% RH. And high-temperature container transportation is prohibited as well. In the long-time high temperature and high humidity storage environment, the product is easy to get viscous, extrusion will be deteriorated and shelf life will be shortened.
Caution
1. The sealant is moisture curable, which should be used up once opened.
2. Other application process should be done within skin formation time, or it will affect the adhesion performance.
3. The curing rate is affected by the temperature and humidity. If it cures too fast, the sealant layer may have bubbles, and affect its quality.
Note
The information and recommendations related to the application and end-use of COMENS’ products are given in good faith based on COMENS’ current knowledge and experience of the products when properly stored, handled and applied under normal conditions. This information must on no account be used as a substitute for necessary prior tests which alone can ensure that a product is suitable for a given use, due to the practical differences in materials, substrates and actual site conditions. Users are requested to check that they are in possession of the latest version of this documents and COMENS’ is at their disposal to supply any additional information.
Tel: +86-10-80341725
Mobile: +86-186 0025 7687
Fax: +86-10-80343041
Company Contact:
Contact Name: Elina Li
Company Name: Beijing Comens New Materials Co., Ltd
Email:
Tel: +86 186 0025 7687
Fax: + 86 010 80341745
Street Address: Yanshan, Fangshan
Beijing, Beijing 100025
China
Website:
https://www.pusealant.com
Member name: pusealant
Country:
China
Member Since: 30 January 2018
Total Leads:
3 pusealant Import Export Business Leads
Business focus: Polyurethane Adhesive, Polyurethane Sealants, Water Proof Coating
Chat:
Verify:
Safe Import Export Tips