-
- Trade Leads
- Trade Services
- B2B Directories
- Trade Connections
- Misc
- Contact Us
A free import export trade leads B2B marketplace since 1996 for manufacturers, suppliers, exporters, importers, buyers, sellers, wholesalers, freight forwarders, shippers, trade shows, exhibits, and export management.
Hello visitor from
USA - 38 visiting from 27 USA 
4 Belgium 
3 Singapore 
3 UK 
1 Canada
Hello visitor from
USA - 38 visiting from 27 USA 4 Belgium 3 Singapore 3 UK 1 Canada
Power Transformer 35kv
Posted at: Offers to Sell and Export | Posted on: Tuesday 18 July 2017 7:18 am | Poster last visit: Monday 25 December 2017 |
Product Category: Main
» Fuels and Fuel Additives and Lubricants and Anti corrosive Materials
» Lubricants and oils and greases and anti corrosives
» Lubricating preparations
» Transformer oil or insulating oil
» Power Transformer 35kv
Product Description:
Power Transformer (35kV)
Oil-immersed Transformer
Products structure and technical features
The oil-immersed
transformer produced by our factory have these advantages: low loss, low noise, high short circuit strength and good appearance. We company create these prefect products of that each parameter has reached to advanced level among domestic similar products by combining advanced manufacture equipments and technology.
Structure features:
Core and main body: it is used iron core cutting line, all inclined ladder joints and improving flux trend to eliminate flux saturation phenomenon of iron core in joints . By doing these, it reduces the no-load loss, no-load current and noise of transformers. Adopting pulling-plank structure, in order to strengthen the ability of withstanding short-circuit, we put many nails around pressing planks and bracing plates are used as support between H.V and L.V yoke, make the iron core be a whole. The iron core sheet are coated by glue which are specialized for silicon steel, so that all silicon steels can be bonded together to make the iron core be integral one, this effectively enhances mechanical strength and plays a positive role in the core anti-rust. The low part of the body and the oil tank are supported through bracing plates adopt" high intensity electric laminated" technology, to guarantee the low part of oil-immersed transformer's body safe and reliable.
Coil: The high-voltage(HV) coil adopts an interleaved-continuous structure, The low-voltage(LV) coil adopts an interleaved-continuous or spiral structure, are independently provided with voltage-regulating winding to balance the ampere turn of each winding-up, effectively lower the mechanical force to minimal level. In the transformer winding, there is a zigzag oil guide structure so as to fully cool all areas inside the winding, lower the temperature rise of the winding and the hot points of the winding and prolong the service life of insulation.
Oil tank: the tank's structure of oil-immersed transformer is bell jar type or suspended type, have a good looking and high mechanical strength. It adopts" flanged joint" technology in every key point (such as annular tubes, pressure valves, switches, etc.), which effectively avoid leaking oil.
Technical Parameter and features
Technical specification
1, voltage:35kV
2, voltage regulation: on load tap regulation, off circuit tap regulation
3, capacity range:<31500kVA
4, frequency: 50Hz
5, phase: 3-phase
6, vectorgroup:Yd11, YNd11, Dy11, Dyn11, YNyn1
7, short circuit impedance: according to customer requirements or national standard
8, operation environment: according to customer requirements or national standard
9, cooling method: ONAN/ONAF
10, Insulation level: power frequency withstand AC-85kV, impulse withstand voltage LI-200kV
Buyer reading
When you make order, pls provide below:
1, model 2, rated capacity 3, voltage combination 4, voltage regulation range
5, frequency 6, vector group 7, short circuit impedance 8, others: special requirements need be remarked
Company Contact:
Contact Name: Fraceen Jin
Company Name: Channel International Ltd.
Email:
Tel: +86-021-61071577
Fax: +86-021-61077317
Street Address: Rm 1001, Ruifeng
International Building, No.248
Yangshupu Rd., Hongkou Dist
Shanghai, Shanghai 200082
China
Website: http://www.ehearttransformer.com/
Member name: ehearttransformer
Country:
China
Member Since: 18 July 2017
Total Leads: 18 ehearttransformer Import Export Business Leads
Business focus: Special Transformer, Dry Type Tansformer
Chat:
Verify: Safe Import Export Tips
Oil-immersed Transformer
Products structure and technical features
The oil-immersed
transformer produced by our factory have these advantages: low loss, low noise, high short circuit strength and good appearance. We company create these prefect products of that each parameter has reached to advanced level among domestic similar products by combining advanced manufacture equipments and technology.
Structure features:
Core and main body: it is used iron core cutting line, all inclined ladder joints and improving flux trend to eliminate flux saturation phenomenon of iron core in joints . By doing these, it reduces the no-load loss, no-load current and noise of transformers. Adopting pulling-plank structure, in order to strengthen the ability of withstanding short-circuit, we put many nails around pressing planks and bracing plates are used as support between H.V and L.V yoke, make the iron core be a whole. The iron core sheet are coated by glue which are specialized for silicon steel, so that all silicon steels can be bonded together to make the iron core be integral one, this effectively enhances mechanical strength and plays a positive role in the core anti-rust. The low part of the body and the oil tank are supported through bracing plates adopt" high intensity electric laminated" technology, to guarantee the low part of oil-immersed transformer's body safe and reliable.
Coil: The high-voltage(HV) coil adopts an interleaved-continuous structure, The low-voltage(LV) coil adopts an interleaved-continuous or spiral structure, are independently provided with voltage-regulating winding to balance the ampere turn of each winding-up, effectively lower the mechanical force to minimal level. In the transformer winding, there is a zigzag oil guide structure so as to fully cool all areas inside the winding, lower the temperature rise of the winding and the hot points of the winding and prolong the service life of insulation.
Oil tank: the tank's structure of oil-immersed transformer is bell jar type or suspended type, have a good looking and high mechanical strength. It adopts" flanged joint" technology in every key point (such as annular tubes, pressure valves, switches, etc.), which effectively avoid leaking oil.
Technical Parameter and features
Technical specification
1, voltage:35kV
2, voltage regulation: on load tap regulation, off circuit tap regulation
3, capacity range:<31500kVA
4, frequency: 50Hz
5, phase: 3-phase
6, vectorgroup:Yd11, YNd11, Dy11, Dyn11, YNyn1
7, short circuit impedance: according to customer requirements or national standard
8, operation environment: according to customer requirements or national standard
9, cooling method: ONAN/ONAF
10, Insulation level: power frequency withstand AC-85kV, impulse withstand voltage LI-200kV
Buyer reading
When you make order, pls provide below:
1, model 2, rated capacity 3, voltage combination 4, voltage regulation range
5, frequency 6, vector group 7, short circuit impedance 8, others: special requirements need be remarked
Company Contact:
Contact Name: Fraceen Jin
Company Name: Channel International Ltd.
Email:
Tel: +86-021-61071577
Fax: +86-021-61077317
Street Address: Rm 1001, Ruifeng
International Building, No.248
Yangshupu Rd., Hongkou Dist
Shanghai, Shanghai 200082
China
Website: http://www.ehearttransformer.com/
Member name: ehearttransformer
Country:
ChinaMember Since: 18 July 2017
Total Leads: 18 ehearttransformer Import Export Business Leads
Business focus: Special Transformer, Dry Type Tansformer
Chat:
Verify: Safe Import Export Tips
Similar Suppliers And Manufacturers Import Export Trade Leads
S11-m Power Transformer - By bokrelec - On Saturday 23 December 2023 6:14 am: power transformer
s11-m electrical power distribution transformer
a new generation of low noise and low loss transformer developed in recent years ....
Kyn61-40.5 35kv Ac Drawout Type Metal Clad Switchgear - By bokrelec - On Tuesday 19 September 2023 7:37 am: power system and mainly used for the transmission and distribution of electrical power and control protection monitoring of the circuit
standards....
Mini European Type Compact Substation 10kv 20kv 35kv - By bokrelec - On Tuesday 19 September 2023 7:39 am: power supply and easy for installation it can realize single power supply double power supply or ring net supply with double-fuse protection low r....
New Style Power Station 5in1 220v 150 W 300w Portable Power Station Ac 220 V For House - By movrpower - On Monday 8 August 2022 10:27 am: power station
product model
nvel-300
cell capacity
75000mah 270wh
dc output
12v 10a
ac output power
300w 220v 50hz
usb-a output
1*5v 2....
Best Battery Portable Power Station 250 / 500w Power Bank Charging Station - By movrpower - On Monday 8 August 2022 10:22 am: power 1000w
battery category lithium battery
shell aluminum ladder
waterproof level ip65
size 210*290*150 mm
weight
9 8kg
output port
4*....
Poe Injector Pse801fm 19w Poe Power Supply 4578 Power Supply - By LGLGUO - On Wednesday 15 February 2023 2:09 am: power is above 19w
the maximum power supply distance is 100m
built in power supply plug and play no management required
pse801fm single port 100m....
Neexgent On Grid Mppt Solar Inverter Mppt Power 3.5kw 5kw Grid Tie Solar Power Inverters - By Neexgent - On Friday 22 July 2022 1:41 am: power support in portable size its comprehensive lcd display offers user-configurable and easy-accessible button operation such as battery charging c....
Power Inductor - By muhuacoltd - On Saturday 1 April 2023 5:15 am: power inductor and smd common mode choke an inductor is a passive two-terminal electrical component that stores energy in a magnetic field when ele.... Import Export Startup Stories
Share Your Story & Get Listed at StartImportExport.com- Jinhua Sunrise Electronic Co Ltd: Andy Peng Of Jinhua Sunrise Electronic From China
- Guangzhou Kinggreat Trading Ltd: Emma Lee Of Guangzhou Kinggreat Trading An Electronic Products And Accessories Supplier From China
- Qingdao Saint-kin Wind Turbine Co Ltd: Sianna Of Qingdao Saintkin Wind Turbine From China
- Esperantop Holding Company Limited: William Of Esperantop Holding Producing High Volume Short Lead Time Consumer Goods From China
- EDI-LED Electronics Co Ltd: Sunny Ye Of EDI-LED Electronics, A Manufacturer Of Led Lighting From China
Transformer oil or insulating oil Classification Navigation
Main - Fuels and Fuel Additives and Lubricants and Anti corrosive Materials - Lubricants and oils and greases and anti corrosives - Lubricating preparations - Transformer oil or insulating oil [8]
TradersCity.com shall not be held liable for any user posted/submitted content including but not limited to trade leads, profiles, images, and any other data. TradersCity.com does not and did not verify any of users posted/submitted data nor is implicitly or explicitly recommending these business offers. TradersCity does not verify truthfulness, accuracy, completeness, nor legality of any businesses, services, and leads posted here. TradersCity does not represent Sellers or Buyers in any transaction between users of the website and is unable to make any opinion in regard to their performance in any transaction. TradersCity neither guarantees nor undertakes in any dispute between sellers and buyers. Protect your business from fraud by trading safely