-
- Trade Leads
- Trade Services
- B2B Directories
- Trade Connections
- Misc
- Contact Us
A free import export trade leads B2B marketplace since 1996 for manufacturers, suppliers, exporters, importers, buyers, sellers, wholesalers, freight forwarders, shippers, trade shows, exhibits, and export management.
Hello visitor from
USA - 130 visiting from 124 USA 
2 Singapore 
2 UK 
1 Germany 
1 Hong Kong
Hello visitor from
USA - 130 visiting from 124 USA 2 Singapore 2 UK 1 Germany 1 Hong Kong
Refrigerant Gas R407c
Posted at: Offers to Sell and Export | Posted on: Wednesday 26 February 2014 1:34 am | Poster last visit: Monday 31 March 2014 |
Product Category: Main
» Material Handling and Conditioning and Storage Machinery and their Accessories and Supplies
» Industrial refrigeration
» Industrial refrigerators
» Refrigerant
» Refrigerant Gas R407c
Product Description:
Retrofit:
R407C can be used to retrofit existing R22 systems in positive displacement, direct expansion
refrigeration, and air conditioning equipment. R407C should not be used in centrifugal chillers or other equipment that uses a flooded evaporator due, to its high temperature glide.
Retrofit Procedure
1. Establish baseline performance. Note the oil type in use and any system operating data (if system is operating properly). Check for existing leaks and identify any needed repairs.
2. Recover the existing refrigerant charge (DO NOT vent to atmosphere). Weigh the amount of refrigerant removed.
3. Drain existing oil from the compressor sump, suction line accumulators, etc. Record the amount of oil removed. Add an equivalent amount of OEM recommended POE oil.
4. Recharge the system with the recovered R22 charge and run the system (at least 1 hour) to circulate the new lubricant.
5. Recover the R-22 charge again and check the residual oil content of the lubricant. The amount of the original lubricant in the POE must be less than 5%.
6. Repeat steps 3 to5, as needed, until the required oil purity level is reached. Once the oil flushes are completed, standard maintenance should be conducted (i.e. filter-drier change, leak repairs).
7. Evacuate the system (less than 500 microns) and ensure it maintains a vacuum. If vacuum is lost, it may indicate that leaks are present in the system.
8. Charge system with R407C refrigerant. Remove refrigerant as liquid only from cylinder. The initial charge weight should be approximately 90% of the standard charge for R-22, charging up to 95% if necessary.
9. Adjust TXV set point and/or refrigerant charge to achieve the desired superheat. Low side pressure control settings may also need to be adjusted.
10. Monitor oil level in the compressor. If necessary, adjust oil amount to attain normal operating level (mid-sight glass).
11. Label system clearly, indicating the type and amounts of system refrigerant and oil.
Company Contact:
Contact Name: Bella. Wang
Company Name: Beijing Starget Chemicals Co., Ltd.
Email:
Tel: 86-10-84340783
Fax: 86-10-84342323
Street Address: No.2jinzhan South
Road , Chaoyang District
Beijing, Beijing 100018
China
Website: http://www.stargetchem.com/
Member name: bjjxjy
Country:
China
Member Since: 25 February 2014
Total Leads: 40 bjjxjy Import Export Business Leads
Business focus: Refrigeration, Fittings, Tools
Chat:
Verify: Safe Import Export Tips
R407C can be used to retrofit existing R22 systems in positive displacement, direct expansion
refrigeration, and air conditioning equipment. R407C should not be used in centrifugal chillers or other equipment that uses a flooded evaporator due, to its high temperature glide.
Retrofit Procedure
1. Establish baseline performance. Note the oil type in use and any system operating data (if system is operating properly). Check for existing leaks and identify any needed repairs.
2. Recover the existing refrigerant charge (DO NOT vent to atmosphere). Weigh the amount of refrigerant removed.
3. Drain existing oil from the compressor sump, suction line accumulators, etc. Record the amount of oil removed. Add an equivalent amount of OEM recommended POE oil.
4. Recharge the system with the recovered R22 charge and run the system (at least 1 hour) to circulate the new lubricant.
5. Recover the R-22 charge again and check the residual oil content of the lubricant. The amount of the original lubricant in the POE must be less than 5%.
6. Repeat steps 3 to5, as needed, until the required oil purity level is reached. Once the oil flushes are completed, standard maintenance should be conducted (i.e. filter-drier change, leak repairs).
7. Evacuate the system (less than 500 microns) and ensure it maintains a vacuum. If vacuum is lost, it may indicate that leaks are present in the system.
8. Charge system with R407C refrigerant. Remove refrigerant as liquid only from cylinder. The initial charge weight should be approximately 90% of the standard charge for R-22, charging up to 95% if necessary.
9. Adjust TXV set point and/or refrigerant charge to achieve the desired superheat. Low side pressure control settings may also need to be adjusted.
10. Monitor oil level in the compressor. If necessary, adjust oil amount to attain normal operating level (mid-sight glass).
11. Label system clearly, indicating the type and amounts of system refrigerant and oil.
Company Contact:
Contact Name: Bella. Wang
Company Name: Beijing Starget Chemicals Co., Ltd.
Email:
Tel: 86-10-84340783
Fax: 86-10-84342323
Street Address: No.2jinzhan South
Road , Chaoyang District
Beijing, Beijing 100018
China
Website: http://www.stargetchem.com/
Member name: bjjxjy
Country:
ChinaMember Since: 25 February 2014
Total Leads: 40 bjjxjy Import Export Business Leads
Business focus: Refrigeration, Fittings, Tools
Chat:
Verify: Safe Import Export Tips
Similar Suppliers And Manufacturers Import Export Trade Leads
Koso Pp800 Gas Gas Positioner - By XianTosiDaTechnologyCo - On Wednesday 2 November 2022 7:07 am: gas gas positioner
this valve positioner including pp800 double action amp amp pp800 single action
the working principle of this series is the sa....
Calibration Gas, Mixture Gas - By taiyugas - On Friday 24 November 2023 3:44 am: gas mixture gas
product description
standards are manufactured using advanced weight and volume tools scales and high sensitivity instruments mul....
Gas Grill - By yuarnbaau - On Wednesday 15 November 2023 7:14 am: gas grill manufacturer and gas grill manufacturer with product serial numbers 280 and 380 these grills are meticulously crafted to elevate your outd....
Hydrogen, H2 Industrial Gas - By taiyugas - On Friday 24 November 2023 3:45 am: gas
product description
hydrogen h2 is a highly flammable gas produced by separating it from water and fossil fuels we offer hydrogen in a varie....
Xenon, Xe Rare Gas - By taiyugas - On Friday 24 November 2023 3:46 am: gas the earth s atmosphere contains trace amounts of xenon xenon is widely used in electronics and electric light source industries
xenon is a che....
Natural Gas Burner - By chineseburner - On Wednesday 20 July 2022 8:03 am: gas burner
1 applications
1 this burner is designed in combination with technologies such as staged combustion strong swirl flame stabilization ....
Octafluorocyclobutane, C4f8 Specialty Gas - By taiyugas - On Thursday 27 April 2023 3:01 am: gas
octafluorocyclobutane is a chemical substance a perfluorinated derivative of cyclobutane colorless odorless and stable
product description
....
Gas Outdoor Patio Heater - By VHANPATIOHEATER - On Thursday 1 September 2022 2:14 am: gas patio heater
gas patio heater material steel stainless steel optional
gas patio heater btus max 46000
gas patio heater heating area 120-200.... Refrigerant Classification Navigation
Main - Material Handling and Conditioning and Storage Machinery and their Accessories and Supplies - Industrial refrigeration - Industrial refrigerators - Refrigerant [19]
TradersCity.com shall not be held liable for any user posted/submitted content including but not limited to trade leads, profiles, images, and any other data. TradersCity.com does not and did not verify any of users posted/submitted data nor is implicitly or explicitly recommending these business offers. TradersCity does not verify truthfulness, accuracy, completeness, nor legality of any businesses, services, and leads posted here. TradersCity does not represent Sellers or Buyers in any transaction between users of the website and is unable to make any opinion in regard to their performance in any transaction. TradersCity neither guarantees nor undertakes in any dispute between sellers and buyers. Protect your business from fraud by trading safely