Product Description:
The OBD-II specification provides for a standardized connector, the female 16-pin J1962 connector. Unlike
the OBD-I connector, which was sometimes found under the bonnet of the vehicle, the OBD-II connector is nearly always located on the driver's side of the car often close to the steering column. SAE J1962 defines the pin out of the connector as:01) -02) Bus positive Line of SAE-J185003) Ford DCL(+) Argentina, Brazil (pre OBD-II) 1997-200004) Chassis ground05) Signal ground06) CAN high (ISO 15765-4 and J2234)07) K line of ISO 9141-2 and ISO 14230-408) -09) -10) Bus negative Line of J185011) Ford DCL(-) Argentina, Brazil (pre OBD-II) 1997-200012) -13) -14) CAN low (ISO 15765-4 and J2234)15) L line of ISO 9141-2 and ISO 14230-416) Battery voltageUnspecified pins (marked with a "-") are left to the vehicle manufacturer's discretion which can be connected up to model specific systems
Company Contact:
Contact Name: Sophia
Company Name: Shenzhen Setolink Exporters Co., Ltd
Email:
Tel: 86-15013755952
Fax: 86-0755-86330961
Street Address: 5fl, Building 51,
Yangmen Industrial Park, Dakan 2
Village, Xili Town, Nanshan District,
Shenzhen, China
Website:
http://www.setolink.com
Member name: SetolinkExporters
Country:
China
Member Since: 12 May 2012
Total Leads:
506 SetolinkExporters Import Export Business Leads
Business focus: Ecg Cable, Spo2 Sensor, Patient Monitor, Video Colposcope, Pulse Oximeter, Obd Cable
Chat:
Verify:
Safe Import Export Tips