-
- Trade Leads
- Trade Services
- B2B Directories
- Trade Connections
- Misc
- Contact Us
A free import export trade leads B2B marketplace since 1996 for manufacturers, suppliers, exporters, importers, buyers, sellers, wholesalers, freight forwarders, shippers, trade shows, exhibits, and export management.
Hello visitor from
USA - 69 visiting from 59 USA 
3 UK 
3 Belgium 
2 Ireland 
1 Germany 
1 Poland
Hello visitor from
USA - 69 visiting from 59 USA 3 UK 3 Belgium 2 Ireland 1 Germany 1 Poland
Sealant / Adhesive For Pvc Pu Pp Abs Pc Ps Pe Materials
Posted at: Offers to Sell and Export | Posted on: Tuesday 20 October 2009 6:15 am | Poster last visit: Monday 27 December 2010 |
Product Description:
Hbc-1537
Features: This is our newly developed item; solvents, accelerants and high molecular polymer
are the basic materials.
It doesn’t contain silicon material. It is non-toxic, water-proof, and anti-aging and the temperature endurance range is from – 60 to +80 degree centigrade.
Applications: It specializes in sealing up PVC、PU、PP、ABS、PC、PS、PE materials. It could also seal those plastic to metal sheets. Please note that this item doesn’t work on foaming materials.
Technical parameter
Item
8098
Physical appearance
Transparent liquid
Density（g/cm3，25℃）
0.86
Viscosity （cps）
1000
Initially cure （min，25℃）
1～3
Totally cure （H，25℃）
12～24
Cure type
volatilization
Tensile strength（MPa）
5
Tear and break the extending（%）
350
Rigidity（Shore A）
2.0
Shear the intensity（MPa）
2.0
Strip the intensity（N/mm）
2
Linear shrink rate（%）
0.5
The temperature range (℃)
- 60 ～ + 80
Volume receptivity (Ω·cm)
3×1015
Puncture the voltage (kV/·mm)
20
Dielectric (1.2MHz)
3.88
Constant Fire-retardant grade
∕
The above-mentioned mechanical performance and electric performance data are at 25 ℃, the relative humidity is 55%, undertaking the examination after being solidified for 7 days
The detailed methods of using
1, it can be used to Clean the surface of any things: clean the surface of the Glued or coated things, eliminate the dust ed mark, dust and greasy dirt, etc..
2, Construct the glue: Pare and make the most advanced part of front part with the razor blade, put the sharp mouth in, crowd the glue liquid to the surface that is cleaned out by pinching rifles, enable its distribution evenly, will be glued in the surface and closed up fixedly
3, Solidify: put the Glued or sealed parts in air, let it solidify naturally. The solidifying course is of from solidifying surface to internal course.
(room temperature and 50% relative humidity) within 24 hours glue will solidify for the depth of 2-4mm, if the position relatively deeper, especially the position is not easy to touch air, the lead time of solidifying will be lengthened. if temperature is relatively low, solidifying time will also lengthen. Before the further disposal or packaging the bonding parts, advice users to wait for enough long time so that conglutination is firm and integrity is not influenced
Notes:
After finishing, should tighten the block immediately, and seal the leftover glue. While using again, there are a few knot covers to seal the place, remove it, does not influence the normal usage of the glue. The glue is in charge of the muzzle and presents a small amount of phenomena of solidifying too.
When store the glue, can use normally after its clearance, and doesn’t influence the properties of product.
Packaging specification:
330ML / tube and 28tube / carton; 110ML / tube, and 100 tube / carton.
Store and transport:
1, Store in the dry shady and cool place, one year of quality guarantee period (25 ℃).
2, This kind of products are non-dangerous articles, can transport according to general chemicals.
.
Company Contact:
Contact Name: Barry Liu
Company Name: Guangzhou Pankie Environment Protection Chemical Co., Ltd.
Email:
Tel: 86-20-82286090
Fax: 86-20-82286065
Street Address: No.48 Xie Shan Road,
Mingzhu Industrial Park, Huangpu
District, Guangzhou, Guangdong,
China
Website: http://www.pankie.com
Member name: sealant1982
Country:
China
Member Since: 10 October 2009
Total Leads: 10 sealant1982 Import Export Business Leads
Business focus: Sealant, Adhesive, Glue
Chat:
Verify: Safe Import Export Tips
Features: This is our newly developed item; solvents, accelerants and high molecular polymer
are the basic materials.
It doesn’t contain silicon material. It is non-toxic, water-proof, and anti-aging and the temperature endurance range is from – 60 to +80 degree centigrade.
Applications: It specializes in sealing up PVC、PU、PP、ABS、PC、PS、PE materials. It could also seal those plastic to metal sheets. Please note that this item doesn’t work on foaming materials.
Technical parameter
Item
8098
Physical appearance
Transparent liquid
Density（g/cm3，25℃）
0.86
Viscosity （cps）
1000
Initially cure （min，25℃）
1～3
Totally cure （H，25℃）
12～24
Cure type
volatilization
Tensile strength（MPa）
5
Tear and break the extending（%）
350
Rigidity（Shore A）
2.0
Shear the intensity（MPa）
2.0
Strip the intensity（N/mm）
2
Linear shrink rate（%）
0.5
The temperature range (℃)
- 60 ～ + 80
Volume receptivity (Ω·cm)
3×1015
Puncture the voltage (kV/·mm)
20
Dielectric (1.2MHz)
3.88
Constant Fire-retardant grade
∕
The above-mentioned mechanical performance and electric performance data are at 25 ℃, the relative humidity is 55%, undertaking the examination after being solidified for 7 days
The detailed methods of using
1, it can be used to Clean the surface of any things: clean the surface of the Glued or coated things, eliminate the dust ed mark, dust and greasy dirt, etc..
2, Construct the glue: Pare and make the most advanced part of front part with the razor blade, put the sharp mouth in, crowd the glue liquid to the surface that is cleaned out by pinching rifles, enable its distribution evenly, will be glued in the surface and closed up fixedly
3, Solidify: put the Glued or sealed parts in air, let it solidify naturally. The solidifying course is of from solidifying surface to internal course.
(room temperature and 50% relative humidity) within 24 hours glue will solidify for the depth of 2-4mm, if the position relatively deeper, especially the position is not easy to touch air, the lead time of solidifying will be lengthened. if temperature is relatively low, solidifying time will also lengthen. Before the further disposal or packaging the bonding parts, advice users to wait for enough long time so that conglutination is firm and integrity is not influenced
Notes:
After finishing, should tighten the block immediately, and seal the leftover glue. While using again, there are a few knot covers to seal the place, remove it, does not influence the normal usage of the glue. The glue is in charge of the muzzle and presents a small amount of phenomena of solidifying too.
When store the glue, can use normally after its clearance, and doesn’t influence the properties of product.
Packaging specification:
330ML / tube and 28tube / carton; 110ML / tube, and 100 tube / carton.
Store and transport:
1, Store in the dry shady and cool place, one year of quality guarantee period (25 ℃).
2, This kind of products are non-dangerous articles, can transport according to general chemicals.
.
Company Contact:
Contact Name: Barry Liu
Company Name: Guangzhou Pankie Environment Protection Chemical Co., Ltd.
Email:
Tel: 86-20-82286090
Fax: 86-20-82286065
Street Address: No.48 Xie Shan Road,
Mingzhu Industrial Park, Huangpu
District, Guangzhou, Guangdong,
China
Website: http://www.pankie.com
Member name: sealant1982
Country:
ChinaMember Since: 10 October 2009
Total Leads: 10 sealant1982 Import Export Business Leads
Business focus: Sealant, Adhesive, Glue
Chat:
Verify: Safe Import Export Tips
Similar Suppliers And Manufacturers Import Export Trade Leads
Mitsui Chemicals Admer Adhesive Resin Gt6 / Gt7 / Admer Adhesive Granules Pellets Particles Nf528, N - By greatwall - On Friday 26 August 2022 3:27 am: adhesive resin gt6 gt7 admer adhesive granules pellets particles nf528 nf527
we large supply mitsui chemicals admer adhesive resin gt6 gt7 and nf....
Nnnsun Hot Sale Pvc Flex Banner Frontlit Banner Pvc Tarpaulin 1-3.2m Glossy Matte - By shsunrisetech - On Wednesday 10 January 2024 8:12 am: pvc flex with dedicate surface and structure is the premium quality printing materials used for high level signage used indoor and outdoor
it has e....
For Pvc Pipe Pvc Stabilizers Fischer Tropsch Wax / Ft Wax Syy-100 - By syntop - On Friday 30 September 2022 8:08 am: for pvc pipe pvc stabilizers fischer tropsch wax ft wax syy-100
application syy-100 can be used in plastic processing such as injection moulding extrusion and color master-batch industry it can also be used in....
Tree Pruning Saw Abs-300 - By chanlongco - On Tuesday 19 July 2022 3:26 am: tree pruning saw abs-300
description
the sharp and smoothly saw is an efficiently garden tool for trimming trees branches plants sharp edges with little friction can shed....
Adhesive Tape - By yidugroup - On Thursday 2 February 2023 8:47 am: adhesive tape
feature
plastic package tape
high quality
strong adhesion for sealing
easy to operate
multi-application
specification
ye-01 1 88 in x 60 ya....
Nail Free Adhesive - By raywincoating - On Friday 27 October 2023 3:00 am: adhesive is a kind of solvent-free neoprene glue strong adhesion strong durability can be filled heat resistant moisture-proof nail free adhesiv....
Self Adhesive Pp Synthetic Paper - By yidugroup - On Thursday 2 February 2023 8:41 am: pp pet pvc
2 size 24” x 30m 36” x 30m 42” x 30m 50” x 30m 60” x 30m
3 core size 2” core
Multipurpose Spray Adhesive - By DayangAerosol - On Saturday 22 July 2023 9:27 am: adhesive is suitable for bonding all kinds of light materials such as paper fabric foam plastic acrylic etc especially in composites applications.... Import Export Startup Stories
Share Your Story & Get Listed at StartImportExport.com- Mag Makina imalat: Mustafa Yildiz Of Mag Makina Imalat From Turkey For Marine, Automotive And Heavy Equipment Parts
- Alfa Sourcing International Co Ltd: Nancy Of Alfa Sourcing International Helping Provide Purchasing Expertise And Services From China
TradersCity.com shall not be held liable for any user posted/submitted content including but not limited to trade leads, profiles, images, and any other data. TradersCity.com does not and did not verify any of users posted/submitted data nor is implicitly or explicitly recommending these business offers. TradersCity does not verify truthfulness, accuracy, completeness, nor legality of any businesses, services, and leads posted here. TradersCity does not represent Sellers or Buyers in any transaction between users of the website and is unable to make any opinion in regard to their performance in any transaction. TradersCity neither guarantees nor undertakes in any dispute between sellers and buyers. Protect your business from fraud by trading safely