-
- Trade Leads
- Trade Services
- B2B Directories
- Trade Connections
- Misc
- Contact Us
A free import export trade leads B2B marketplace since 1996 for manufacturers, suppliers, exporters, importers, buyers, sellers, wholesalers, freight forwarders, shippers, trade shows, exhibits, and export management.
Hello visitor from
USA - 42 visiting from 22 USA 
12 Canada 
3 France 
1 Brazil 
1 Zimbabwe 
1 India 
1 UK 
1 Belgium
Hello visitor from
USA - 42 visiting from 22 USA 12 Canada 3 France 1 Brazil 1 Zimbabwe 1 India 1 UK 1 Belgium
Sell High Early-strength Admixture
Posted at: Offers to Sell and Export | Posted on: Tuesday 16 February 2010 10:52 am | Poster last visit: Tuesday 18 February 2014 |
Product Description:
Descreption:
ACCEPLAST High Early-Strength admixture has the characteristics of high water reduction,
high early strength and high strengthening effect, etc. Because of its good cement adaptability, easiness for use, and excellent strengthening effect. ACCEPLAST can be widely applied to the concrete structures that require high early strength and high strengthening effect.
main technical properties:
● High early strength.
It can greatly increases the early strength of the concrete by 110~230% at the age of 1 day, 60~130% at the age of 3 days and 50~90% at the age of 7 days, which effectively accelerate form turnover, shorten construction cycle and improve labor productivity.
● High water reduction
ACCEPLAST is an ideal admixture for preparing high-slump concrete and high strength concrete because its water reduction can be up to 18~22%.
● Highly strengthening effect.
ACCEPLAST not only effectively increases the early strength of the concrete, but also makes the later strength develop continuously. The compressive strength of the concrete with ACCEPLAST increases by 30~50% at the age of 28days and 20~40% at the age of 90days.
● Obvious frost resistance.
The lowest construction temperature of the concrete with ACCEPLAST can be down to -5℃.
● Excellent durability
The addition of ACCEPLAST can effectively modify the pore structure of concrete, increase the compactness and the ability against freeze, carbonation and corrosion, etc., of the concrete. Moreover, its alkali content is much lower than the limited range of alkaline-aggregate reaction. It has no corrosion substance to reinforcement.
● Health and Safety
It isn’t poisonous and radioactive.
● Strong adaptability
This product is compatible with different types of cement, and particularly with mineral additives in concrete such as fly ash.
● Easy for use.
It can be added into the mixer directly or added with cement, sand and stone, so it is quite easy to be used.
scope of application:
It can be widely applied to the concrete constructions such as poured-in-place or pre-cast concrete structure. It is particularly suitable for the projects requiring high early strength and high later strength, especially for cold concreting.
uses and attentions:
● dosage
The normal dosage range is 0.7~1.2 % (by cement weight); while for high strength concrete the recommended addition rate can be increased to 1.2~1.5%.
● Add the product directly into the mixer or with cement and aggregate. Attention! Never dissolve in water beforehand.
● Accurately measure and properly prolong the mixing time to ensure enough dispersion.
● The time of the concrete to be covered and watered after pouring is about 6~12hs after mixing, in winding and hot weather 2~3h for plastic concrete and 1~2h for harsh concrete. The procedure of surface covering should be adopted to prevent frost damage in winter.
● Storage
It should be stored in dry place. Its quality guarantee is within two years.
packaging:
ACCEPLAST is packaged in anti-wetting double-layer plastic bags with the weight of 40kg per bag, and is easy to be delivered and transported.
after-sale services:
To assist you in obtaining predicated performances and ensure high quality projects, we offer technical consulting service, site mix proportion design or advising mix proportion. Our technical personnel would give free-charge site assistance service as well as construction technical guidance.
Company Contact:
Contact Name: Ms. Stanislava Grishanova
Company Name: RosBalt Grupa Holding
Email:
Tel: +371-67964388
Fax: +371-67962212
Street Address: Riga,
Unijas 25, LV-1039,
Latvia
Website: http://www.rosbaltgrupa.lv
Member name: RosBaltGrupa
Country:
Latvia
Member Since: 07 October 2009
Total Leads: 97 RosBaltGrupa Import Export Business Leads
Business focus: Chemicals, Building Chemicals
Chat:
Verify: Safe Import Export Tips
ACCEPLAST High Early-Strength admixture has the characteristics of high water reduction,
high early strength and high strengthening effect, etc. Because of its good cement adaptability, easiness for use, and excellent strengthening effect. ACCEPLAST can be widely applied to the concrete structures that require high early strength and high strengthening effect.
main technical properties:
● High early strength.
It can greatly increases the early strength of the concrete by 110~230% at the age of 1 day, 60~130% at the age of 3 days and 50~90% at the age of 7 days, which effectively accelerate form turnover, shorten construction cycle and improve labor productivity.
● High water reduction
ACCEPLAST is an ideal admixture for preparing high-slump concrete and high strength concrete because its water reduction can be up to 18~22%.
● Highly strengthening effect.
ACCEPLAST not only effectively increases the early strength of the concrete, but also makes the later strength develop continuously. The compressive strength of the concrete with ACCEPLAST increases by 30~50% at the age of 28days and 20~40% at the age of 90days.
● Obvious frost resistance.
The lowest construction temperature of the concrete with ACCEPLAST can be down to -5℃.
● Excellent durability
The addition of ACCEPLAST can effectively modify the pore structure of concrete, increase the compactness and the ability against freeze, carbonation and corrosion, etc., of the concrete. Moreover, its alkali content is much lower than the limited range of alkaline-aggregate reaction. It has no corrosion substance to reinforcement.
● Health and Safety
It isn’t poisonous and radioactive.
● Strong adaptability
This product is compatible with different types of cement, and particularly with mineral additives in concrete such as fly ash.
● Easy for use.
It can be added into the mixer directly or added with cement, sand and stone, so it is quite easy to be used.
scope of application:
It can be widely applied to the concrete constructions such as poured-in-place or pre-cast concrete structure. It is particularly suitable for the projects requiring high early strength and high later strength, especially for cold concreting.
uses and attentions:
● dosage
The normal dosage range is 0.7~1.2 % (by cement weight); while for high strength concrete the recommended addition rate can be increased to 1.2~1.5%.
● Add the product directly into the mixer or with cement and aggregate. Attention! Never dissolve in water beforehand.
● Accurately measure and properly prolong the mixing time to ensure enough dispersion.
● The time of the concrete to be covered and watered after pouring is about 6~12hs after mixing, in winding and hot weather 2~3h for plastic concrete and 1~2h for harsh concrete. The procedure of surface covering should be adopted to prevent frost damage in winter.
● Storage
It should be stored in dry place. Its quality guarantee is within two years.
packaging:
ACCEPLAST is packaged in anti-wetting double-layer plastic bags with the weight of 40kg per bag, and is easy to be delivered and transported.
after-sale services:
To assist you in obtaining predicated performances and ensure high quality projects, we offer technical consulting service, site mix proportion design or advising mix proportion. Our technical personnel would give free-charge site assistance service as well as construction technical guidance.
Company Contact:
Contact Name: Ms. Stanislava Grishanova
Company Name: RosBalt Grupa Holding
Email:
Tel: +371-67964388
Fax: +371-67962212
Street Address: Riga,
Unijas 25, LV-1039,
Latvia
Website: http://www.rosbaltgrupa.lv
Member name: RosBaltGrupa
Country:
LatviaMember Since: 07 October 2009
Total Leads: 97 RosBaltGrupa Import Export Business Leads
Business focus: Chemicals, Building Chemicals
Chat:
Verify: Safe Import Export Tips
Similar Suppliers And Manufacturers Import Export Trade Leads
Aquaculture Water Environment Monitoring And Early Warning System Knf-400e - By Kanafu - On Sunday 28 April 2024 9:10 am: early warning independent back office manage and download data alarm records etc
6 multi-relay output can realize the divided pool control aer....
Non Wet Strength Metallized Paper - By metallizedpaper - On Thursday 18 April 2024 9:39 am: strength metallized paper
non wet strength metallized paper could be used for high quality labels or packages after lamination good printability and....
Wet Strength Metallized Paper - By metallizedpaper - On Thursday 18 April 2024 9:32 am: strength metallized paper
metallized paper designed for labels for re-usable packaging water resistant with good ink retention and wash-off properti....
Non Wet Strength Holographic Metallized Paper - By metallizedpaper - On Thursday 18 April 2024 9:42 am: strength holographic metallized paper
holographic metallized paper is without wet strength it has excellent print-ability properties and gloss which....
Wet Strength Holographic Metallized Paper - By metallizedpaper - On Thursday 18 April 2024 9:35 am: wet strength holographic metallized paper
the designs can be customized keeping a balance of authentication needs amp amp aesthetic appeal in mind water resistant with good ink retention ....
Lsst-01 Leak And Seal Strength Tester - By materialstests - On Saturday 9 March 2024 1:44 am: strength tester
the lsst-01 leak and seal strength tester is designed for the evaluation of seal performance and integrity in a wide range of packagi....
High Tensile Strength 7 Wire Pc Strand - By yxmaterial - On Tuesday 7 January 2025 7:16 am: strength high elongation and widely being used in precast area
commonly available sizes for 7-wire strands include 9 3mm 11 1mm 12 7mm 15 2mm ....
Wet Strength Metallized Paper For Self Adhesive Label - By metallizedpaper - On Thursday 18 April 2024 9:39 am: strength metallized paper for self adhesive label
metallized paper designed for self-adhesive labels that require wet-strength resistance facestock .... Import Export Startup Stories
Share Your Story & Get Listed at StartImportExport.com- Led Lamp Lighting Company: Tony Lee Of Led Lamp Lighting Company Specializing in Production And Sale Of Indoor And Outdoor LED Lights
- Xeno Company China: Lywin Of Xeno Specializing in Research, Design and Manufacturing High Power LED Flashlights From China
- Shaoxing Marina Biotechnology: James Han Of Shaoxing Marina Biotechnology From China
TradersCity.com shall not be held liable for any user posted/submitted content including but not limited to trade leads, profiles, images, and any other data. TradersCity.com does not and did not verify any of users posted/submitted data nor is implicitly or explicitly recommending these business offers. TradersCity does not verify truthfulness, accuracy, completeness, nor legality of any businesses, services, and leads posted here. TradersCity does not represent Sellers or Buyers in any transaction between users of the website and is unable to make any opinion in regard to their performance in any transaction. TradersCity neither guarantees nor undertakes in any dispute between sellers and buyers. Protect your business from fraud by trading safely