Product Description:
This is OEMED EtCO2 module, you can buy it if you want to take it into your application.
We assure its
good working quality before shipment, but not sure if can be used by you due to technology knowledge from yourside.
Product Introduction:
The LH600 CO2 sensor is the ideal low sampling-rate capnography solution for your patient monitoring system. LH600 can show an accurate capnogram with all respiration rates up to 120 breaths per minute. Cutting-edge technology enables LH600 to provide accurate measurement of instantaneous CO2 concentration, respiration rate, end-tidal CO2, inspired CO2, inspiration time and expiration time. With a sampling-rate low to 50 mL/min, LH600 is ideal for use on adult, pediatric and infant patients; patients undergoing procedural sedation; and short- term monitoring of intubated patients.
Product Features:
1.State-of-the-art Non-dispersive infrared (NDIR) technology, dual wavelength, no moving parts
2.Breath-by-breath CO2 monitoring
3.Sample rate low to 50 mL/min
4.Barometer pressure and temperature compensation
5.Range calibration in 0 15% by manufacturer
6.Fast warmup time ensures full accuracy within 5 minutes
7.Oxygen, N2O and anesthetic compensation for accurate measurement
8.Low power consumption less than 2W
9.Fully compatible with Respronics Loflo sensor and CPT module
Technical Specifications:
Transducer Type
LH600 Sidestream CO2 sensor
Sample Rate
50 mL/min, 10mL/min.
Principle of Operation
Non-dispersive infrared (NDIR) single beam optics, dual wavelength, no moving parts
Initialization Time
Capnogram displayed in less than 5 seconds
Reaching full specifications within 5 minutes.
CO2 Measure Range
0 - 114 mmHg
0 - 15%
0 - 15.2kPa
CO2 Resolution
0.1 mm Hg 0 to 50 mm Hg
0.25 mm Hg 50 to 114 mm Hg
CO2 Accuracy
0 40 mmHg 2 mmHg
40 114 mmHg 5% of reading
Respiratory Rate
Range 2 to 120 Breaths Per Minute (BPM)
Accuracy 1 breath
Calibration
No routine user calibration required
Compensation
Automatic Barometer Pressure 400 - 800 mmHg.
User selectable O2 / N2O compensation.
Voltage Requirements
5.0 vdc 5%
Power Consumption
Less than 1.5 Watts typical.
Temperature and Humidity
Operating: 0º to 40, 10 to 90% RH, non-condensing
Storage: -40º to 70ºC, <90% RH, non-condensing
Interconnection
Pin out:
1. TxD Serial data from LH600
2. RxD Serial data from Host
3. AGND Analog return
4. DGND Digital return
5. va 5.0v
Data Interface
TTL level, bi-directional, 19200 baud rate, standard N-8-1.
Fully compatible with Respironics LoFlo communication protocol
Data Output
CO2 gas concentration (mm Hg), End-tidal CO2, Inspired CO2, Respiratory Rate, barometric pressure compensation. Compensation for O2 (0 - 100%) and N2O (On / Off) when supplied by host.
Company Contact:
Contact Name: Jenny
Company Name: Shenzhen Setolink Electronics Co., Ltd
Email:
Tel: +86 18126139483
Fax: 86-755-86330961
Street Address: 6fl, Building 10,
Hongtianmao Industrial Zone,
Shangcun, Gongming
Shenzhen, Guangdong 518106
China
Website:
http://www.setolink.com
Member name: setolinkElectronics
Country:
China
Member Since: 22 April 2014
Total Leads:
115 setolinkElectronics Import Export Business Leads
Business focus: Medical, Auto Diagnosis Series, Spo2 Sensor, Ecg, Ibp, Ekg Cable, Auto Obd Connector
Chat:
Verify:
Safe Import Export Tips