-
- Trade Leads
- Trade Services
- B2B Directories
- Trade Connections
- Misc
- Contact Us
A free import export trade leads B2B marketplace since 1996 for manufacturers, suppliers, exporters, importers, buyers, sellers, wholesalers, freight forwarders, shippers, trade shows, exhibits, and export management.
Hello visitor from
USA - 122 visiting from 113 USA 
2 Germany 
2 Singapore 
2 UK 
1 Brazil 
1 Japan 
1 Belgium
Hello visitor from
USA - 122 visiting from 113 USA 2 Germany 2 Singapore 2 UK 1 Brazil 1 Japan 1 Belgium
Silica Aerogel Thermal Insulation Felt / Blanket For Coating
Posted at: Offers to Sell and Export | Posted on: Thursday 22 August 2019 9:02 am | Poster last visit: Sunday 29 September 2019 |
Product Category: Main
» Structures and Building and Construction and Manufacturing Components and Supplies
» Insulation
» Thermal insulation
» Thermal insulation sleeving
» Silica Aerogel Thermal Insulation Felt / Blanket For Coating
Product Description:
Silica Aerogel Thermal Insulation Felt /Blanket For Coating
Aerogel is a solid gel material with a porous
network structure with internal pores filled with air. Professor Kistler of the United States obtained silica aerogel for the first time under supercritical drying conditions by sol-gel method with water glass. There are many kinds of aerogels, of which SiO2 aerogel is the most common, translucent light blue, and the quality is ultra-light like "solid smoke". As a typical porous material, SiO2 aerogel is filled with air (or other gas) in most of its interior space, and its skeleton is only 0.15% to 15% of the total volume. The aerogel has an average pore size of about 25 nm, and the air molecules (free path 50-70 nm) cannot move freely in between. In addition, there are many closed holes in the aerogel skeleton with different sizes of "dead end", which increases the aerogel. The path of solid heat transfer, so the aerogel is a poor conductor of heat.
Nano aerogel felt physical properties:
Packing form: roll
Thickness: 5mm, 8mm, 10mm
Width: 1500mm
Density: 180-220kg/m3
Applicable temperature: -200 °C - +1000 °C (related to the model)
Hydrophobic: hydrophobic (below 350 ° C)
Thermal conductivity: 0.012 - 0.018w/m·k (at 25 ° C)
Application examples of nano aerogel felt:
First, the application in the high temperature industry
Nano-aerogel felts are the best choice for equipment that requires insulation while requiring small size and light weight. For example, ladle, torpedo, tundish, etc. in the metallurgical industry can realize the expansion of these devices by using nano-aerogel felt without changing the steel structure, and at the same time, can achieve a good thermal insulation effect. On a 100-ton steel ladle in a steel mill, the nano-aerogel felt was used instead of the traditional heat-insulating board to carry out the experiment. The test results are as follows:
1. Under the condition of the same thickness of the heat insulating material, the temperature of the outer wall of the ladle using the nano aerogel felt is 100-130 lower than that of the outer wall of the ladle using the traditional heat insulating board, which effectively reduces the thermal deformation of the ladle shell. .
2. Under the condition that the outer wall temperature of the ladle is the same, the 20mm thick nano-aerogel felt can replace the traditional heat insulation board of 30mm thickness to realize the expansion of the ladle.
3. Using nano-aerogel felt, the molten steel in the ladle is cooled slowly, which is conducive to the stability of the molten steel temperature.
4. It has good chemical stability, and it does not decompose, degrade, and not powder.
Details could contact us as below:
Contact : Lily Zhang
+8618033762592 ( whatsapp/Wechat/Imo/Viber)
Email : team7 at huataogroup . com
www . industrial-felts . com ( Aluminium Exstruction and printing felt)
www . aerogel-blanket . com ( Aerogel Blanket)
Company Contact:
Contact Name: Lily Zhang
Company Name: Huatao Felt Company
Email:
Tel: +86 18033762592
Fax:
Street Address: Zhonghua North
Street
Shijiazhuang, Hebei 050000
China
Website: https://www.huataogroup.com
Member name: HuataoFeltCompany
Country:
China
Member Since: 20 August 2019
Total Leads: 11 HuataoFeltCompany Import Export Business Leads
Business focus: Aerogel Blanket, Industiral Felts
Chat:
Verify: Safe Import Export Tips
Aerogel is a solid gel material with a porous
network structure with internal pores filled with air. Professor Kistler of the United States obtained silica aerogel for the first time under supercritical drying conditions by sol-gel method with water glass. There are many kinds of aerogels, of which SiO2 aerogel is the most common, translucent light blue, and the quality is ultra-light like "solid smoke". As a typical porous material, SiO2 aerogel is filled with air (or other gas) in most of its interior space, and its skeleton is only 0.15% to 15% of the total volume. The aerogel has an average pore size of about 25 nm, and the air molecules (free path 50-70 nm) cannot move freely in between. In addition, there are many closed holes in the aerogel skeleton with different sizes of "dead end", which increases the aerogel. The path of solid heat transfer, so the aerogel is a poor conductor of heat.
Nano aerogel felt physical properties:
Packing form: roll
Thickness: 5mm, 8mm, 10mm
Width: 1500mm
Density: 180-220kg/m3
Applicable temperature: -200 °C - +1000 °C (related to the model)
Hydrophobic: hydrophobic (below 350 ° C)
Thermal conductivity: 0.012 - 0.018w/m·k (at 25 ° C)
Application examples of nano aerogel felt:
First, the application in the high temperature industry
Nano-aerogel felts are the best choice for equipment that requires insulation while requiring small size and light weight. For example, ladle, torpedo, tundish, etc. in the metallurgical industry can realize the expansion of these devices by using nano-aerogel felt without changing the steel structure, and at the same time, can achieve a good thermal insulation effect. On a 100-ton steel ladle in a steel mill, the nano-aerogel felt was used instead of the traditional heat-insulating board to carry out the experiment. The test results are as follows:
1. Under the condition of the same thickness of the heat insulating material, the temperature of the outer wall of the ladle using the nano aerogel felt is 100-130 lower than that of the outer wall of the ladle using the traditional heat insulating board, which effectively reduces the thermal deformation of the ladle shell. .
2. Under the condition that the outer wall temperature of the ladle is the same, the 20mm thick nano-aerogel felt can replace the traditional heat insulation board of 30mm thickness to realize the expansion of the ladle.
3. Using nano-aerogel felt, the molten steel in the ladle is cooled slowly, which is conducive to the stability of the molten steel temperature.
4. It has good chemical stability, and it does not decompose, degrade, and not powder.
Details could contact us as below:
Contact : Lily Zhang
+8618033762592 ( whatsapp/Wechat/Imo/Viber)
Email : team7 at huataogroup . com
www . industrial-felts . com ( Aluminium Exstruction and printing felt)
www . aerogel-blanket . com ( Aerogel Blanket)
Company Contact:
Contact Name: Lily Zhang
Company Name: Huatao Felt Company
Email:
Tel: +86 18033762592
Fax:
Street Address: Zhonghua North
Street
Shijiazhuang, Hebei 050000
China
Website: https://www.huataogroup.com
Member name: HuataoFeltCompany
Country:
ChinaMember Since: 20 August 2019
Total Leads: 11 HuataoFeltCompany Import Export Business Leads
Business focus: Aerogel Blanket, Industiral Felts
Chat:
Verify: Safe Import Export Tips
Similar Suppliers And Manufacturers Import Export Trade Leads
Ht650 Aerogel Blanket For Heat Thermal Insulation - By HUATAOLOVERLTD - On Monday 13 June 2022 7:27 am: silica aerogel is composite with fibers perfect for the insulation in pipes tanks vessels and other applications
ht650 series is the ideal optio....
Ht200 Aerogel Blanket For Cold Insulation - By HUATAOLOVERLTD - On Monday 13 June 2022 7:24 am: aerogel blanket
web www dot aerogel-blanket com
email maple at huataogroup com
tel 0086 133 8311 0583
whatsapp 0086 133 8311 0583
sp....
Aerogel Blanket With Adhesive Tape - By HUATAOLOVERLTD - On Monday 13 June 2022 7:47 am: aerogel blanket
web www dot aerogel-blanket com
email maple at huataogroup com
tel 0086 133 8311 0583
whatsapp 0086 133 8311 0583
huata....
Aerogel Blanket With Fiberglass Cloth - By HUATAOLOVERLTD - On Monday 13 June 2022 7:31 am: silica aerogel-based insulation material of limited combustibility used for exterior and interior applications
supplied in a variety of finishes t....
Composite Aerogel Blanket For Building Construction - By HUATAOLOVERLTD - On Monday 13 June 2022 7:40 am: silica aerogel-based insulation material of limited combustibility used for exterior and interior applications 
Water-based Thermal Insulation Paints - By vitalchemical - On Tuesday 27 February 2024 8:44 am: thermal solutions with water-based thermal insulation paints
discover the cutting-edge advantages of our water-based thermal insulation paints these....
Walk In Cold Room Panels Polyurthane Thermal Insulation Panel And Pir Insulated Sandwich Panel - By coolplusfridge - On Saturday 14 May 2022 3:37 am: thermal insulation panel pu insulated sandwich panel for building cold storage warehouses
coolplus commercial refrigeration amp amp kitchen equipm....
Tz1600-30 Single-coating Aluminium Coating Line - By ltcoatingline - On Thursday 12 May 2022 6:22 am: coating aluminium coating line
coating line features
this is an economic type of coating line apply to most acp top bottom coil coating product th.... Import Export Startup Stories
Share Your Story & Get Listed at StartImportExport.com- Ningbohi Tech Wede Motor Machines Co Ltd: Emily Of Ningbo Hitech Wede Motor Machines From China
- Umur Basim Ve Kirt. San. Ve Tic. A. S.: Canan Istemi Of Umur Basim Ve Kirt San Ve Tic From Turkey In The Production Of Continuous Form Printing
- Pingxiang Baisheng Chemical Packing Co Ltd: Ella Liu Of Pingxiang Baisheng Chemical Packing From China
Thermal insulation sleeving Classification Navigation
Main - Structures and Building and Construction and Manufacturing Components and Supplies - Insulation - Thermal insulation - Thermal insulation sleeving [259]
TradersCity.com shall not be held liable for any user posted/submitted content including but not limited to trade leads, profiles, images, and any other data. TradersCity.com does not and did not verify any of users posted/submitted data nor is implicitly or explicitly recommending these business offers. TradersCity does not verify truthfulness, accuracy, completeness, nor legality of any businesses, services, and leads posted here. TradersCity does not represent Sellers or Buyers in any transaction between users of the website and is unable to make any opinion in regard to their performance in any transaction. TradersCity neither guarantees nor undertakes in any dispute between sellers and buyers. Protect your business from fraud by trading safely