Product Description:
Standing Seam Roll Forming Machine, Joint Hidden Roll Forming Machine:
Main Parameter of the standing
seam machine :
1) Steel Material: Q235, 2) thickness of material: 0.4-0.8mm3) Feeding Width Max: 610mm
4) Capacity of Decoiler: 5000 kg
5) Inner Diameter of the Coiler: 500-600mm
6) Outer Diameter of the Coiler: 1800mm
7) Forming steps: 15 steps
8) Driving System: Chain Transmission
9) Power of main motor: 5.5kw,3phases, 415V, 50Hz
10) Reducer: Cycloid Pin
11) Power of Hydraulic cutting Machine: 3kw
12) Forming Speed Max: 15m/min
13) Dimension (L*W*H) and Layout:
Manual Decoiler: 1.1m*1.8m*1.2m
Main Machine: 7m*1.5m*1.3m
Runout Table: 4m*0.6m*0.8m
Main Configuration
SR.Main ConfigurationQ’tyDescription
1Manual Decoiler1Manual Expansion, 5T Capacity
2Main Forming Set1Chain Transmission, Motor, Green
3Cutter1Hydraulic, PLC Control
4Controller1PLC, Encoder, Touch Screen, Transducer, 5Hydraulic System1PLC control
6Runout TAble1simple
7Electric components1 setBreaker, contactor, limit switch, Relay
8Guard Cover1For the Chain, Yellow
9Seaming machine1To joint the panels for installationi
Process and Features
Decoiler — Guiding —Roll Forming — Encoder —Hydraulic Cutter — run out table
process of the standing seam roll forming machine
1. This M/C adopts inner-expansion manual decoiler. The diameter can be adjusted
through the adjusting bolt according to the coil’s inner diameter. The operation
is quite easy. The decoiling speed is to the main machine’s forming speed.
2. The main frame is structured by welding entire T shape steel. The side stands
are welded on the frame, and to clear the stress by vibration in order to
maintain the rigidity and stability of the machine.
3. The forming rollers are made of GCr15 bearing steel through a series of heat
treatment such as forging, distressing anneal, high frequency hardening(the
degreed is 8-10mm), backfiring, phosphorization etc. The surface of the rollers
can reach the rigidity of HRC58-62. All the forming rollers are process on CNC
lathe, by which the accuracy can be granteed.
4. The main shaft is made of 40Cr advanced alloy steel after a series of heat
treatment such as high frequency hardening, quenching and tempering etc and
processed on lathe, burnishing the surface, wire cutting the channel to make it
high accuracy and large capacity.
5. Cut to length is the last process of this machine line. It cuts accurately to
any length you set on the PLC. The cutter consists of Hydraulic diver, profiled
blade and cutter frame. The blade is made from Cr12 cold punching steel after
strict process. It adopts 45 degree staggering cutting. This costs no waste and
can hold the cutting profile a good shape. And this cutting is of high accuracy.
6. The machine adopts Mitsubishi FXIS series industrial PLC, Mitsubishi GOT-F
series touch screen, Panasonic VF series Transducer and Omron encoder. The
entire electric components are of good stability and long life.
Company Contact:
Contact Name: Sales
Company Name: Shanghai Allstar Industrial Co., Ltd
Email:
Tel: 86-21-67353838
Fax: 86-21-57350108
Street Address: No.16 XinShun Road,
XinNong Industrial Zone, JinShan District,
Shanghai, China
Website:
http://www.ranger-sh.com/
Member name: ShanghaiAllstar
Country:
China
Member Since: 09 April 2010
Total Leads:
151 ShanghaiAllstar Import Export Business Leads
Business focus: Roll Forming Machine, Cold Roll Former, Roll Forming Machine Design, Metal Sheet Roll Former, Trapezoidal Sheet Forming Machine, Trim Deck Forming
Chat:
Verify:
Safe Import Export Tips