Product Description:
Temperature Cycling Test Chambers
Fast change rates test chamber
Temperature Cycle Test Chamber
Fast
change rates testing chamber is suitable for testing the changes of instruments, electrical, electronic products, takes advantage of compact, modern scroll compressors to bring fast temperature cycling to small form factor. Temperature cycling rates from 5 to 20°C/min. are possible. Two different ultimate low temperatures are available: -40°C or -70°C.
The faster cycle times can be used to meet more aggressive test methods that require thermal stress during transitions. Significant test time can be saved in completing tests, as well.
To demonstrate performance, Grande uses the international standard IEC 60068 3-5 measured at the supply air. Temperature cycles are run from hot to cold extremes, and the middle 80% of the transition is timed to determine performance. Your actual cycling results will vary depending on methodology, including the start and end temperatures, and the amount of samples loaded.
Features
Quality construction
Stainless steel exterior and interior
Rounded interior corners for easy cleaning
Full thermal break around doorframe and door
Rotating door latch is easy and secure
Dual-layer insulation of fiberglass and expanded foam for thermal integrity
One 2" (50mm) to One 4" (100mm) diameter cable port on the left, with an impervious, flexible silicone plug
Easy lift-off service panels
Pressure relief port to allow air volume changes due to rapid temperature changes
Three levels of overheat protection
Ftf programmer/controller
Popular PID controller with touch-screen operation
Stores 120 different profiles with up to 1200 steps each (ramp, soak, jump, auto-start, end)
Step types include: ramp, soak, jump, auto-start, and end
Ethernet interface for remote monitoring and operation
Recommended options
Dry air purge, to compensate for quickly shrinking air during cooling, as well as to reduce risk of condensation.
Product temperature control, allows feedback from a second sensor on the product. Ensures faster completion of transition steps.
Company Contact:
Contact Name: Ben Zhao
Company Name: Grande Electronics Technology Limited
Email:
Tel: 86-769-87003076
Fax: 86-769-87008505
Street Address: Hengling Industrial
Park, Nanshe Village, Chashan Town,
Dongguan, Guangdong, China
Dongguan, Guangdong 523000
China
Website:
https://www.grandetop.com
Member name: grandetop
Country:
China
Member Since: 05 September 2018
Total Leads:
11 grandetop Import Export Business Leads
Business focus: Temperature Humidity Chambers, Thermal Shock Test Chamber, Precision Hot Air Oven, Aging Test Chamber
Chat:
Verify:
Safe Import Export Tips