Product Description:
I Introduction
Base on dry sand needs from wet washing process, we do research and manufacture a series
new type dewatering screen. TS dewatering screen is mainly used in mining, construction for coarse or fine sand dehydrate processing.With the advantages of simple structure and easy maintenance, it becomes a hot sell in our market.
II Debugging & commissioning
1.Adjusting the 2 vibrating motor eccentric block to the same scale when adjusting motor eccentric block, in addition rotary direction of the 2 motors should on the contrary. (shown in picture 2)
2.Examining if the vibrating motor eccentric block is in the same scale or not or examining the spring support is consistent or not if dewatering screen is not stable, jump-amplitude is larger.
3.Raising the discharge hole height or opening hole in feeding hole baffle makes redundant water flow into water tank.
4.After passing the no-load commissioning, it can put into load commissioning, time can be adjusted according to the commissioning requirements.
III Safety operation
1.Close down the equipment and examine if the equipment perform abnormally, cut off the power before examination.
2.Electrical equipment should connect ground, electric wire should reliable insulation, and installed in flexible conduit.
3.Operators check the note on duty before working. Examine the stretch degree of triangular belt, oil level of vibrator, examine the stretch degree of screen, the bolt fasten condition and the screen damage situation.
4.Starting the equipment in no-load condition, strictly prohibit to work overload, it is allowed to stop the equipment after the materials of washing tank all discharged, it is not allowed to adjust, wash or examine the equipment when it operates.
5.Normally, adding lubricating grease each 8 hours, exciter bearing use EL-3 lithium-based grease, examining the equipment totally every month, examination content including the bolt fasten condition, if the side plate and beam breaks or not, the use condition of spring, condition of belt and the electric switch.
6.Vibrating screen stall should conforms to the technical sequence. Except special requirement, it is not allowed to feed after stall with material.
7.Operators should have safe guard consciousness, ensure security work.
8.Communicate with technicians if all of the above can’t solve problems.
9.If the equipment is not maintained properly by customer, this company will not undertake the responsible caused by user.
Company Contact:
Contact Name: Gao
Company Name: Luoyang Longzhong Heavy Machinery Co., Ltd.
Email:
Tel: +8637965160016
Fax: +86-379-65160018
Street Address: Zhongqiao Real
Estate Building, Nanchang Road,
Jianxi District, Luoyang, China
Luoyang, Henan 471000
China
Website:
http://www.lzzgchina.com/
Member name: LuoyangLongzhongHeavy
Country:
China
Member Since: 27 September 2018
Total Leads:
40 LuoyangLongzhongHeavy Import Export Business Leads
Business focus: Dewatering Screens, Sand Washing Plant, Tailings Disposal
Chat:
Verify:
Safe Import Export Tips