-
- Trade Leads
- Trade Services
- B2B Directories
- Trade Connections
- Misc
- Contact Us
A free import export trade leads B2B marketplace since 1996 for manufacturers, suppliers, exporters, importers, buyers, sellers, wholesalers, freight forwarders, shippers, trade shows, exhibits, and export management.
Hello visitor from
USA - 64 visiting from 64 USA
Hello visitor from
USA - 64 visiting from 64 USA
Unit Pump Fuel Injection-eup 6.990mm-electronic Unit Pump
Posted at: Offers to Sell and Export | Posted on: Tuesday 5 May 2020 6:33 am | Poster last visit: Friday 17 July 2020 |
Product Category: Main
» Fuels and Fuel Additives and Lubricants and Anti corrosive Materials
» Fuels
» Petroleum and distillates
» Diesel fuel
» Unit Pump Fuel Injection-eup 6.990mm-electronic Unit Pump
Product Description:
unit pump fuel injection-EUP 6.990MM-electronic unit pump
#unit pump fuel injection#
#electronic unit
pump#
#unit pump fuel injection-&-electronic unit pump#
CHINA-LUTONG is specialize in providing high quality common rail injectors.
The merits of the common rail fuel injection system architecture have been recognized since the development of the diesel engine.Lower fuel pump peak torque requirements. As high speed direct injection (HSDI) engines developed, more of the energy to mix the air with fuel came from the fuel spray momentum as opposed to the swirl mechanisms employed in older, IDI combustion systems. Only high pressure fuel injection systems were able to provide the mixing energy and good spray preparation needed for low PM and HC emissions. To generate the energy required to inject the fuel in approximately 1 millisecond, the conventional distributor pump would have to provide nearly 1 kW of hydraulic power in four 1 ms bursts per pump revolution, thus placing considerable strain on the drive shaft. One of the reasons behind the trend toward common rail systems was to minimize the maximum pump torque requirement. While the power and average torque requirements of the common rail pump were similar, high pressure fuel delivery is to an accumulator and thus the peak flow rate (and peak torque required to drive the pump) does not have to coincide with the injection event as is the case with the distributor pump. Pump discharge flow can be spread out over a longer portion of the engine cycle to keep pump torque demand more even.
Improved noise quality. DI engines are characterized by higher peak combustion pressures and, thus, by higher noise than IDI engines. It was found that improved noise and low emissions were best achieved by introducing pilot injection(s). This was most easily realized in the common rail system, which was capable of stable deliveries of small pilot fuel quantities over the entire load/speed range of the engine.
Ka gao
Company Contact:
Contact Name: Rotorhead
Company Name: China-lutong Parts Plant
Email:
Tel: 13666935270
Fax:
Street Address: Dubin Industrial
District, Hanjiang
Putian, Fujian 311100
China
Website: http://www.china-lutong.com
Member name: rotorheadr
Country:
China
Member Since: 07 June 2018
Total Leads: 354 rotorheadr Import Export Business Leads
Business focus: Nozzle, Plunger, Head Rotor
Chat:
Verify: Safe Import Export Tips
#unit pump fuel injection#
#electronic unit
pump#
#unit pump fuel injection-&-electronic unit pump#
CHINA-LUTONG is specialize in providing high quality common rail injectors.
The merits of the common rail fuel injection system architecture have been recognized since the development of the diesel engine.Lower fuel pump peak torque requirements. As high speed direct injection (HSDI) engines developed, more of the energy to mix the air with fuel came from the fuel spray momentum as opposed to the swirl mechanisms employed in older, IDI combustion systems. Only high pressure fuel injection systems were able to provide the mixing energy and good spray preparation needed for low PM and HC emissions. To generate the energy required to inject the fuel in approximately 1 millisecond, the conventional distributor pump would have to provide nearly 1 kW of hydraulic power in four 1 ms bursts per pump revolution, thus placing considerable strain on the drive shaft. One of the reasons behind the trend toward common rail systems was to minimize the maximum pump torque requirement. While the power and average torque requirements of the common rail pump were similar, high pressure fuel delivery is to an accumulator and thus the peak flow rate (and peak torque required to drive the pump) does not have to coincide with the injection event as is the case with the distributor pump. Pump discharge flow can be spread out over a longer portion of the engine cycle to keep pump torque demand more even.
Improved noise quality. DI engines are characterized by higher peak combustion pressures and, thus, by higher noise than IDI engines. It was found that improved noise and low emissions were best achieved by introducing pilot injection(s). This was most easily realized in the common rail system, which was capable of stable deliveries of small pilot fuel quantities over the entire load/speed range of the engine.
Ka gao
Company Contact:
Contact Name: Rotorhead
Company Name: China-lutong Parts Plant
Email:
Tel: 13666935270
Fax:
Street Address: Dubin Industrial
District, Hanjiang
Putian, Fujian 311100
China
Website: http://www.china-lutong.com
Member name: rotorheadr
Country:
ChinaMember Since: 07 June 2018
Total Leads: 354 rotorheadr Import Export Business Leads
Business focus: Nozzle, Plunger, Head Rotor
Chat:
Verify: Safe Import Export Tips
Similar Suppliers And Manufacturers Import Export Trade Leads
Fuel Injection Nozzle Dn0pdn112 - By chenchendieselpartsplant - On Monday 29 August 2022 4:40 am: pump parts test bench cam disk supply pump cam shaft bearing etc
105000-1780 np-dnosd178
105000-1850 np-dn0sd126a
105000-1870 np-dn0sdn187
....
Fuel Injection Nozzle 6801027 - By chenchendieselpartsplant - On Monday 29 August 2022 4:42 am: pump parts test bench cam disk supply pump cam shaft bearing etc
6801014 6801014
6801016 6801016
6801018 6801018
6801019 6801019
6801022 ....
Immersion Multistage Centrifugal Pump / Coolant Pump - By shoufei - On Tuesday 18 October 2022 6:03 am: pump installed with standard motor the motor shaft is directly connected with the pump shaft by coupling according to the requirement the pump can....
Electronic Fiberglass Fabric - By daozhifiberglass - On Monday 31 October 2022 6:33 am: electronic fiberglass fabric
electronic fiberglass fabric is plain weaved on air-jet looms by intersecting warp and weft the fabric surface is treated after 1st and 2nd de-sizi....
Best Source Electronic Film Capacitors Inc - By jecelectroniccomponents - On Thursday 8 December 2022 9:37 am: electronics ltd or dongguan zhixu electronic co ltd is the original manufacturer of various kinds of electronic components jec has passed iso900....
Electronic Dust Removal Screen Wipes - By lihua - On Thursday 13 October 2022 3:10 am: electronic devices are just covered in dust no matter how much you clean them it seems like the dust just comes back well now there s a solution - e....
Electronic / Precision End Cutting Pliers - By daikentools - On Thursday 15 September 2022 1:37 am: electronic equipment and precision machinery
3 ergonomically designed two color handles
4 smooth-running leaf spring structure to ensure lightwe....
Injection Mold Engineering / Design - By eastoncorp - On Wednesday 30 March 2022 6:23 am: injection mold design engineering provider established in 1987 makes efforts in research and development of custom mold design
keep an open mind t.... Import Export Startup Stories
Share Your Story & Get Listed at StartImportExport.com- Shanghai Hold Heavy Industry Co Ltd: Warren Guo Of Shanghai Hold Heavy Industry, A Manufacturer Of Various Concrete Construction Machinery From China
- Denjoy Dental Co Ltd: Joanna Jiang Of Denjoy Dental Manufacturing Endodontic Equipment From China
- Shenzhen RiOu Refrigeration Machine Equipment Co Ltd: Vivian Hu Of Shenzhen RiOu Refrigeration Machine Equipment Company From China
- Wenzhou Joy Autoparts Co Ltd: Vivian Of Wenzhou Joy Auto Parts From China
- Aisi Machinery Co Ltd: Donald Of Aisi Machinery, A Supplier Of Concrete Machinery From China
Diesel fuel Classification Navigation
Main - Fuels and Fuel Additives and Lubricants and Anti corrosive Materials - Fuels - Petroleum and distillates - Diesel fuel [150]
TradersCity.com shall not be held liable for any user posted/submitted content including but not limited to trade leads, profiles, images, and any other data. TradersCity.com does not and did not verify any of users posted/submitted data nor is implicitly or explicitly recommending these business offers. TradersCity does not verify truthfulness, accuracy, completeness, nor legality of any businesses, services, and leads posted here. TradersCity does not represent Sellers or Buyers in any transaction between users of the website and is unable to make any opinion in regard to their performance in any transaction. TradersCity neither guarantees nor undertakes in any dispute between sellers and buyers. Protect your business from fraud by trading safely