-
- Trade Leads
- Trade Services
- B2B Directories
- Trade Connections
- Misc
- Contact Us
A free import export trade leads B2B marketplace since 1996 for manufacturers, suppliers, exporters, importers, buyers, sellers, wholesalers, freight forwarders, shippers, trade shows, exhibits, and export management.
Hello visitor from
USA - 136 visiting from 134 USA 
1 Belgium 
1 Spain
Hello visitor from
USA - 136 visiting from 134 USA 1 Belgium 1 Spain
V.35 And 10 / 100m To E1 Protocol Converter
Posted at: Offers to Sell and Export | Posted on: Tuesday 1 September 2009 9:08 am | Poster last visit: Thursday 22 March 2012 |
Product Description:
FBPC100 Series gives the interface conversion between G.703 E1 and V.35. This device provides an economical
digital access solution for E1 and Fractional E1 network services. With a adapter cable, the Device can link to other DTE Device, such as router, at data rates of 64Kbps to 2048Kbps. User data is placed into the E1 frame, using only the required number of timeslots. Timeslot assignment is accomplished according to the Data Port speed and manual setting of DIP switches.FBPC100 Series is widely used in communication network, both in WAN and LAN connection field.
Features
Interface conversion between E1 and V.35, E1 and Ethernet
Support ITU-T V.35, G.703, G.704, G.823
Fully compatible with IEEE 802.3 and Ethernet Standards
Standalone and chassis module available, support hot-swap
Framed (N*64Kbps) and unframed (2.048Mbps) optional, support continuous and discontinuous timeslots setting
Ethernet port 10Mbps, Full/Half Duplex mode compatible
10Base-T LAN Interface on RJ-45 connector and MDI/MDI-X auto-crossover
Frame mode support PCM30/ PCM31
CRC/non-CRC auto-negotiation on E1 interface
Support remote bandwidth control, and remote loop back under framed mode.
Support internal clock, E1 recovery clock or V.35 line clock
Provide local, diagnostic and remote loop back test.
For E1 interface, 75 ohm (unbalanced) and 120 ohm (balanced) available and auto-negotiation.
For V.35 interface, DCE and DTE mode are optional
Comprehensive LED indicators on front panel, convenient for the diagnosis of equipment working state
Management
Support Console, WEB and SNMP management
Provide Timing Mode Setting, Loop back mode setting, Framed or Unframed mode setting clock resources selection, and etc.
Provide environment parameter monitoring, including power supply status and device operation temperature
Show details of system information, including Chassis name, location information, IP address, start-up time, software and hardware version
View & configure the working status of local and remote device, including connection status, port status
Provide user management to ensure the device operation security
Specifications
E1 ports
Compliant with: ITU-T G.703, G.704, G.823
Rate: 2.048Mbps
Code type: HDB3
Impedance: 75 ohm unbalanced & 120 ohm balanced optional
Physical connector: BNC for unbalanced & RJ45 for balanced
V.35 interface:
Compliant with V.35 standard
Rate: n×64Kbps, n=132
Physical connector: DB25 female jack
DCE & DTE optional
Ethernet ports
Compliant with: IEEE802.3, 802.3u, 802.3x
Rate: 10Mbps, Half/Full auto-negotiation
Auto MDI/MDI-X
Physical connector: RJ45
Environment
Operation Temperature: 0~50
Operation Relative Humidity: 0~90%
Store Temperature: -20~65
Store Relative Humidity: 0~95%
Company Contact:
Contact Name: Siya Liu
Company Name: Beijing Fibridge Co., Ltd
Email:
Tel: +86 10 58858988
Fax: +86 10 58858520
Street Address: A402, Power Creative
Bldg, No. 1 Shangdi East Rd, Haidian
District, Beijing, 100085 China
Website: https://www.fibridge.com
Member name: bjfibridge
Country:
China
Member Since: 01 September 2009
Total Leads: 57 bjfibridge Import Export Business Leads
Business focus: Intelligent Video Analysis, Ip Video Surveillance, Video Optical Transmitter, Media Converter, Protocol Converter, Pdh Multiplexer, 155m Sdh, Mstp, Msap
Chat:
Verify: Safe Import Export Tips
digital access solution for E1 and Fractional E1 network services. With a adapter cable, the Device can link to other DTE Device, such as router, at data rates of 64Kbps to 2048Kbps. User data is placed into the E1 frame, using only the required number of timeslots. Timeslot assignment is accomplished according to the Data Port speed and manual setting of DIP switches.FBPC100 Series is widely used in communication network, both in WAN and LAN connection field.
Features
Interface conversion between E1 and V.35, E1 and Ethernet
Support ITU-T V.35, G.703, G.704, G.823
Fully compatible with IEEE 802.3 and Ethernet Standards
Standalone and chassis module available, support hot-swap
Framed (N*64Kbps) and unframed (2.048Mbps) optional, support continuous and discontinuous timeslots setting
Ethernet port 10Mbps, Full/Half Duplex mode compatible
10Base-T LAN Interface on RJ-45 connector and MDI/MDI-X auto-crossover
Frame mode support PCM30/ PCM31
CRC/non-CRC auto-negotiation on E1 interface
Support remote bandwidth control, and remote loop back under framed mode.
Support internal clock, E1 recovery clock or V.35 line clock
Provide local, diagnostic and remote loop back test.
For E1 interface, 75 ohm (unbalanced) and 120 ohm (balanced) available and auto-negotiation.
For V.35 interface, DCE and DTE mode are optional
Comprehensive LED indicators on front panel, convenient for the diagnosis of equipment working state
Management
Support Console, WEB and SNMP management
Provide Timing Mode Setting, Loop back mode setting, Framed or Unframed mode setting clock resources selection, and etc.
Provide environment parameter monitoring, including power supply status and device operation temperature
Show details of system information, including Chassis name, location information, IP address, start-up time, software and hardware version
View & configure the working status of local and remote device, including connection status, port status
Provide user management to ensure the device operation security
Specifications
E1 ports
Compliant with: ITU-T G.703, G.704, G.823
Rate: 2.048Mbps
Code type: HDB3
Impedance: 75 ohm unbalanced & 120 ohm balanced optional
Physical connector: BNC for unbalanced & RJ45 for balanced
V.35 interface:
Compliant with V.35 standard
Rate: n×64Kbps, n=132
Physical connector: DB25 female jack
DCE & DTE optional
Ethernet ports
Compliant with: IEEE802.3, 802.3u, 802.3x
Rate: 10Mbps, Half/Full auto-negotiation
Auto MDI/MDI-X
Physical connector: RJ45
Environment
Operation Temperature: 0~50
Operation Relative Humidity: 0~90%
Store Temperature: -20~65
Store Relative Humidity: 0~95%
Company Contact:
Contact Name: Siya Liu
Company Name: Beijing Fibridge Co., Ltd
Email:
Tel: +86 10 58858988
Fax: +86 10 58858520
Street Address: A402, Power Creative
Bldg, No. 1 Shangdi East Rd, Haidian
District, Beijing, 100085 China
Website: https://www.fibridge.com
Member name: bjfibridge
Country:
ChinaMember Since: 01 September 2009
Total Leads: 57 bjfibridge Import Export Business Leads
Business focus: Intelligent Video Analysis, Ip Video Surveillance, Video Optical Transmitter, Media Converter, Protocol Converter, Pdh Multiplexer, 155m Sdh, Mstp, Msap
Chat:
Verify: Safe Import Export Tips
Similar Suppliers And Manufacturers Import Export Trade Leads
8-port 10 / 100m Unmanaged Poe Switch With 2 10 / 100m Uplink Rj45 Ports - By GzcomCommunication - On Wednesday 24 January 2024 10:11 am: 10 100m poe switch featuring 8x10 100m poe ports + 2x10 100m uplink rj45 ports ideal for ip cameras access points amp amp poe devices
· 8*10 10....
Multiple Protocol Conversion Industrial Iot Gateway For Smart City - By bliiot - On Thursday 31 August 2023 3:42 am: protocols modbus rtu modbus tcp dl t645 bacnet ip bacnet ms tp to modbus tcp opc ua mqtt bacnet ip protocol conversion huawei iot alibaba io....
Lag-s400 Infrared Converter Slag Detection System - By WuhanCenterRise - On Friday 9 September 2022 1:28 am: converter slag detection system
overview
the infrared converter slag detection system uses a far-infrared thermal imager to monitor the situation of....
Greenhouse Ventilation Exhaust Fans Control Inverter 3 Phase 380v Frequency Converter Transducer For - By fxairsolution - On Thursday 24 November 2022 1:53 am: converter is specially designed for greenhouse exhaust fans and has a temperature control function the frequency converter is suitable for exhaust fa....
Mel-40 4e1 To Ethernet Protocol Converter - By tomxiong - On Friday 30 March 2007 2:06 am: 10base-t ethernet and vice versa this protocol converter could support 1-4e1 to ethernet which extend the bandwidth to 7 68mbps it is widely used ....
Mel-80 8e1 To Ethernet Protocol Converter - By tomxiong - On Friday 30 March 2007 2:08 am: 10base-t ethernet and vice versa this protocol converter could support 1-8e1 to ethernet which extend the bandwidth to 16 348mbps it is widely use....
Sell 13.56mhz Iso14443a B Protocol Rfid Card Reader / Writer - By jinmuyu - On Wednesday 15 August 2007 5:22 am: sell 13 56mhz iso14443a b protocol rfid card reader writer
module no mr701sck uc
interface rs232 usb
protocol supported iso14443a iso14443b
card supported mifares50 mifares70 mifare ultralight mi....
Sell Iso15693 Protocol Vicinity Rfid Card Reader Led Display - By jinmuyu - On Wednesday 15 August 2007 5:27 am: sell iso15693 protocol vicinity rfid card reader led display
module no mr-600sgk ug
interface rs232 usb
protocols iso15693
protocol supported ti rfid tag-it hf philips i code sli other tags compliant.... Import Export Startup Stories
Share Your Story & Get Listed at StartImportExport.com- Beijing Fibridge Co Ltd: Siya Liu Of Beijing Fibridge Company, A Manufacturer Of Intelligent Video And Telecommunication From China
TradersCity.com shall not be held liable for any user posted/submitted content including but not limited to trade leads, profiles, images, and any other data. TradersCity.com does not and did not verify any of users posted/submitted data nor is implicitly or explicitly recommending these business offers. TradersCity does not verify truthfulness, accuracy, completeness, nor legality of any businesses, services, and leads posted here. TradersCity does not represent Sellers or Buyers in any transaction between users of the website and is unable to make any opinion in regard to their performance in any transaction. TradersCity neither guarantees nor undertakes in any dispute between sellers and buyers. Protect your business from fraud by trading safely