-
- Trade Leads
- Trade Services
- B2B Directories
- Trade Connections
- Misc
- Contact Us
A free import export trade leads B2B marketplace since 1996 for manufacturers, suppliers, exporters, importers, buyers, sellers, wholesalers, freight forwarders, shippers, trade shows, exhibits, and export management.
Hello visitor from
USA - 253 visiting from 228 USA 
8 Singapore 
5 UK 
4 Belgium 
3 Brazil 
2 Hong Kong 
1 Russia 
1 Europe 
1 Germany
Hello visitor from
USA - 253 visiting from 228 USA 8 Singapore 5 UK 4 Belgium 3 Brazil 2 Hong Kong 1 Russia 1 Europe 1 Germany
Waste Management System For Oilfield Or Solids Control
Posted at: Offers to Sell and Export | Posted on: Thursday 13 July 2017 3:12 am | Poster last visit: Thursday 4 January 2018 |
Product Category: Main
» Mining and oil and gas services
» Well drilling and construction services
» Downhole fluid services
» Fluid waste management service
» Waste Management System For Oilfield Or Solids Control
Product Description:
Why
Contamination of drilling fluids with drilled cuttings is an unavoidable consequence of successful
drilling operations. If the drilling fluid does not carry cuttings to the surface, the rig either is not “making hole” or soon will be stuck in the hole it is making. The drill cuttings that are separated from the drilling fluid on the surface by the solids control equipment and some quantity of unrecoverable or economically unwanted drilling fluid are a major source of drilling waste. Drilled and formation solids that are sized smaller than can be removed by the solids control equipment are often reported as drill solids. Some quantity of drill solids will accumulate in the drilling fluid and must be removed by the solids control equipment or reduced in concentration by dilution.(source)
How
As the drill bit grinds rocks into drill cuttings, which become entrained in the mud flow and are carried to the surface. In order to get back in the mud to the recirculating mud system and to make the solids easier to handle, the solids must be separated from the mud. The first step in removing the cuttings from the mud involves circulating the mixture of mud and cuttings over vibrating screens called drying shakers. The liquid mud passes through the screens and is recirculated back to the mud tanks from which mud is withdrawn for pumping downhole. The drill cuttings remain on top of the shale shaker screens; the vibratory action of the shakers moves the cuttings down the screen and off the end of the shakers to a point where they can be collected and stored in a tank or pit for further treatment or management. Often two series of drying shakers are used. The original series (primary shakers) uses coarse screens to eliminate only the larger cuttings. The second series (secondary shakers) utilizes fine mesh screens to remove much smaller particles. In general, divided drill cuttings are coated with a large quantity of drilling mud roughly equal in volume to the cuttings. Additional mechanical processing is often used in the mud pit system to further remove as many subtle solids as possible because these particles are inclined to interfere with drilling performance. This automated equipment usually is the property of one of three types: 1) hydrocyclone-type desilters and desanders, 2) mud cleaners (hydrocyclone discharging on a fine screened shaker), and 3) rotary bowl decanting centrifuges. Parted select solids are associated with the larger drill cuttings removed from the drying shakers. If the solids collected by the shale shakers are still coated with so much mud that they are unsuitable for the next reuse or disposal step or if the used mud is valuable enough to collect as much of it as possible, the solids can be further treated with drying shakers utilizing high gravitational separation, vertical or horizontal rotary cuttings dryers, screw-type squeeze presses, or centrifuges. Cuttings dryers recover additional mud and produce dry, powdery cuttings.
All wells are drilled with generation of waste. Including drilling cuttings, waste water, spent drilling fluids, completion fluids, and filtration wastes and so on. With increasing legislation, public awareness and minimum operator environmental standards, the drilling waste management has increased in importance and no ranks in importance along side that of drilling fluids around the world.
Drilling Waste Management Waste Management
In short, whole waste management is 4R’s processing
Recycle-Get the circulation loop
Recover-Help valuable material property recovery
Reduce-Cut down disposal and cost
Reuse-Reuse all reusable things
Oil-based Waste Management System
Drilling waste management systems are packages of different function for drilling waste management. Usually include high G drying shaker, auger feeder or screw conveyor, skid mounted cuttings dryer, and decanter centrifuge with telescopic skid, drilling cuttings tank or mud skips.
We are not a one size fits all treatment provider. To deliver totally customized waste management solutions, we leverage a broad portfolio of modular to deploy unique configurations tailored to your operating needs. From shakers to cuttings dryer, conveyance systems to thermal processing units, we have the right products to tackle any challenge, and the expertly trained personnel to implement the ideal solution.
Company Contact:
Contact Name: Jessie
Company Name: Aipu Solids Control
Email:
Tel: +86-18691483929
Fax: +86-2963611978
Street Address: 4th Jingyuan Road,
Jinghe Industry Zone
Xi'an, Shaanxi 710200
China
Website: https://www.aipusolidcontrol.com
Member name: aipusolidcontrol
Country:
China
Member Since: 11 July 2017
Total Leads: 172 aipusolidcontrol Import Export Business Leads
Business focus: Solids Control Equipment, Shale Shaker, Mud Cleaner, Centrifuge
Chat:
Verify: Safe Import Export Tips
Contamination of drilling fluids with drilled cuttings is an unavoidable consequence of successful
drilling operations. If the drilling fluid does not carry cuttings to the surface, the rig either is not “making hole” or soon will be stuck in the hole it is making. The drill cuttings that are separated from the drilling fluid on the surface by the solids control equipment and some quantity of unrecoverable or economically unwanted drilling fluid are a major source of drilling waste. Drilled and formation solids that are sized smaller than can be removed by the solids control equipment are often reported as drill solids. Some quantity of drill solids will accumulate in the drilling fluid and must be removed by the solids control equipment or reduced in concentration by dilution.(source)
How
As the drill bit grinds rocks into drill cuttings, which become entrained in the mud flow and are carried to the surface. In order to get back in the mud to the recirculating mud system and to make the solids easier to handle, the solids must be separated from the mud. The first step in removing the cuttings from the mud involves circulating the mixture of mud and cuttings over vibrating screens called drying shakers. The liquid mud passes through the screens and is recirculated back to the mud tanks from which mud is withdrawn for pumping downhole. The drill cuttings remain on top of the shale shaker screens; the vibratory action of the shakers moves the cuttings down the screen and off the end of the shakers to a point where they can be collected and stored in a tank or pit for further treatment or management. Often two series of drying shakers are used. The original series (primary shakers) uses coarse screens to eliminate only the larger cuttings. The second series (secondary shakers) utilizes fine mesh screens to remove much smaller particles. In general, divided drill cuttings are coated with a large quantity of drilling mud roughly equal in volume to the cuttings. Additional mechanical processing is often used in the mud pit system to further remove as many subtle solids as possible because these particles are inclined to interfere with drilling performance. This automated equipment usually is the property of one of three types: 1) hydrocyclone-type desilters and desanders, 2) mud cleaners (hydrocyclone discharging on a fine screened shaker), and 3) rotary bowl decanting centrifuges. Parted select solids are associated with the larger drill cuttings removed from the drying shakers. If the solids collected by the shale shakers are still coated with so much mud that they are unsuitable for the next reuse or disposal step or if the used mud is valuable enough to collect as much of it as possible, the solids can be further treated with drying shakers utilizing high gravitational separation, vertical or horizontal rotary cuttings dryers, screw-type squeeze presses, or centrifuges. Cuttings dryers recover additional mud and produce dry, powdery cuttings.
All wells are drilled with generation of waste. Including drilling cuttings, waste water, spent drilling fluids, completion fluids, and filtration wastes and so on. With increasing legislation, public awareness and minimum operator environmental standards, the drilling waste management has increased in importance and no ranks in importance along side that of drilling fluids around the world.
Drilling Waste Management Waste Management
In short, whole waste management is 4R’s processing
Recycle-Get the circulation loop
Recover-Help valuable material property recovery
Reduce-Cut down disposal and cost
Reuse-Reuse all reusable things
Oil-based Waste Management System
Drilling waste management systems are packages of different function for drilling waste management. Usually include high G drying shaker, auger feeder or screw conveyor, skid mounted cuttings dryer, and decanter centrifuge with telescopic skid, drilling cuttings tank or mud skips.
We are not a one size fits all treatment provider. To deliver totally customized waste management solutions, we leverage a broad portfolio of modular to deploy unique configurations tailored to your operating needs. From shakers to cuttings dryer, conveyance systems to thermal processing units, we have the right products to tackle any challenge, and the expertly trained personnel to implement the ideal solution.
Company Contact:
Contact Name: Jessie
Company Name: Aipu Solids Control
Email:
Tel: +86-18691483929
Fax: +86-2963611978
Street Address: 4th Jingyuan Road,
Jinghe Industry Zone
Xi'an, Shaanxi 710200
China
Website: https://www.aipusolidcontrol.com
Member name: aipusolidcontrol
Country:
ChinaMember Since: 11 July 2017
Total Leads: 172 aipusolidcontrol Import Export Business Leads
Business focus: Solids Control Equipment, Shale Shaker, Mud Cleaner, Centrifuge
Chat:
Verify: Safe Import Export Tips
Similar Suppliers And Manufacturers Import Export Trade Leads
Access Control System Drop Arm Turnstile Jdyzz-2 - By jaydaturnstiles - On Thursday 27 October 2022 8:55 am: system drop-arm turnstile crowd control drop arm turnstile operates in a fast durable smooth way with low power consumption
access control system ....
Waste Bins Manufacturers - By IdealPolyTechnologies - On Thursday 10 March 2022 7:16 am: waste bins in india we design and produce high quality waste bins using fda approved 100% virgin materials the garbage bins are manufactured in var....
Bank Mower, China Bush Remote Control Price, Remote Control Grass Cutter For Sale - By ShandongSupershineRobot - On Wednesday 23 November 2022 6:34 am: system
2 one-stop service with a large spare parts warehouse and professional service team no matter where you are you are guaranteed of warm re....
Max Remote Control Slope Mower With Remote Control Brush Cutter On Tracks - By Maxchris - On Thursday 11 August 2022 6:22 am: max remote control slope mower with remote control brush cutter on tracks
quick details
grade
slope mower
engine displacement
225cc
voltage
12v
max cutting height
15 cm
min cutting height
2 cm
power
6 hp
....
Waste Tire Recycling Machine - By optimarecycling - On Thursday 30 June 2022 1:30 am: waste tire recycling machine
rubber crumb machine plant tire recycling machine for sale
machine description
rubber crumb plant produce a fine wire free rubber granules th....
Sustainable Waste Management A And Recycling Services - By thekabadiwala - On Wednesday 26 April 2023 11:28 am: waste management company which aims to minimize waste generation by recovering and diverting recyclables resources from landfill to recycling industry....
Oil Drilling Waste Handling Equipment - By dcsolidscontrol - On Wednesday 18 May 2022 6:51 am: oil drilling waste handling equipment
drilling cutting box
product description
drilling cutting box mainly used in offshore to transport abandon drilling fluid and cuttings to onshore ....
Remote Control Grass Cutter, China Rc Slope Mower Price, Remote Control Lawn Mower With Tracks For S - By ShandongSupershineRobot - On Friday 9 December 2022 5:34 am: system
2 one-stop service with a large spare parts warehouse and professional service team no matter where you are you are guaranteed of warm re.... Import Export Startup Stories
Share Your Story & Get Listed at StartImportExport.com- Ramo Selectronicx: Rahram Palaniyappan Of Ramo Selectronicx In the Business Of Security Electronic Products From India
- Itscool Technology Co Ltd: Larry Leung Of ITCOOL Technology, A Security And Vehicle Electronics Manufacturing Company From China
- Shenzhen Baiteman Tech. Company Limited: Sherry a sales person in Shenzhen Baiteman Tech Company from China
- Beta Packaging Machinery: Anio Lim Of Beta Packaging Machinery From China
- Nanjing Victory Storage Equipment Manufacturing Co Ltd: Jason Of Nanjing Victory Storage Equipment Manufacturing From China
Fluid waste management service Classification Navigation
Main - Mining and oil and gas services - Well drilling and construction services - Downhole fluid services - Fluid waste management service [9]
TradersCity.com shall not be held liable for any user posted/submitted content including but not limited to trade leads, profiles, images, and any other data. TradersCity.com does not and did not verify any of users posted/submitted data nor is implicitly or explicitly recommending these business offers. TradersCity does not verify truthfulness, accuracy, completeness, nor legality of any businesses, services, and leads posted here. TradersCity does not represent Sellers or Buyers in any transaction between users of the website and is unable to make any opinion in regard to their performance in any transaction. TradersCity neither guarantees nor undertakes in any dispute between sellers and buyers. Protect your business from fraud by trading safely