-
- Trade Leads
- Trade Services
- B2B Directories
- Trade Connections
- Misc
- Contact Us
A free import export trade leads B2B marketplace since 1996 for manufacturers, suppliers, exporters, importers, buyers, sellers, wholesalers, freight forwarders, shippers, trade shows, exhibits, and export management.
Hello visitor from
USA - 19 visiting from 17 USA 
1 Canada 
1 UK
Hello visitor from
USA - 19 visiting from 17 USA 1 Canada 1 UK
Water Sandblasting And Wet Sandblasting
Posted at: Offers to Sell and Export | Posted on: Monday 18 January 2010 6:28 am | Poster last visit: Monday 18 January 2010 |
Product Description:
Precidose has achieved tremendous success on a new feature of Wet sandblasting equipments.
There are
a wide variety of surface preparation methods available, such as solvent cleaning, power-tool cleaning, dry sand blasting etc. But, all these conventional methods are rarely used because they are time consuming, not cost effective & provide poor cleaning results & also create environmental pollution.
Nowadays, water sandblasting by high pressure waterjet pump has got wide acceptance in the field of surface preparation as well as in paint removal & rust Removal. In wet sandblasting, an abrasive material is mixed with the waterjet to create an abrasive spray. This abrasive spray is blasted on the surface, which breaks away small pieces of undesirable coating corrosion or other undesirable substances to create the desired metal finish, perfect for recoating.
Wet sandblasting is widely used in engineering, heavy engineering, fabrication, construction and many other industries for different applications.
how water sandblasting works?
Start the high pressure system and adjust the water flow and system pressure with your nozzle selection, pump RPM and Regulating Unloader setting. Open the trigger on gun to assure system is operating properly.
Place the sand induction probe in the sand supply container. With the trigger on the gun open, adjust the small valve on the mixing head. The adjustment creates a vacuum in the sand hose line and starts the flow of sand. The pressure washer sandblaster should be approximately 12 to 15 inches away from the work surface when the trigger is opened and the water sandblasting operation begins.
NOTE: Test a sample area to be certain that surface will not be damaged by abrasive action.
The angle of attack and distance from the work surface may be varied to provide the best work speed, while still maintaining the greatest amount of impact energy. For optimum performance the sand inlet hose should not exceed 25 feet.
When the wet sand blasting unit is operating efficiently, there will be a smooth and continuous flow of sand through the nozzle. The amount of sand flow is directly related to the vacuum created in mixing nozzle. The intensity of the vacuum is dependent upon the liquid velocity of the water.
The pressure and flow rate through the spray nozzle are the factors that determine the liquid velocity, amount of vacuum and rate of sand flow.
If the spray nozzle is chosen to give the maximum pressure and flow rate possible for the pump, the rate of sand flow will also be at maximum. Total vacuum seal and maximum swirl velocity are obtained at 5ΒΊ spray nozzle.
advantages
Because of the water ingredient, it will not create any environmental pollution problem caused by fluttering the micro power.
It can remove the burrs (surface projections) & scales formed on surface and clean the surface without damaging the work piece.
The surface finishing can access a homogeneous matte finish (spot pattern). It can contribute significantly to the finishing demand for surface roughness.
It only applies small shot blasting effect to the surface to be finished and improve and reinforce the material of work piece.
The foreign materials after being removed will be rinsed and flushed out by the jet of water.
It doesn\ t require any chemical during operation.
It doesn\ t affect the dimensions of the object.
limitations
Antirust inhibitor is to be used after cleaning ferrous material.
Though water consumption is not too high, it is to be taken in to account to dispose it off or recycled.
The surface roughness is more than dry sand blasting.
applications
Paint removal, rust removal, corrosion removal & scale removal
Casting Cleaning
Ship hull cleaning
Clean & peen precision parts
Clean areas, which are not accessible to hand sanders
Produce and anchor pattern ideal for uniform finishing
Deburr machined parts
Blend light scratches and tool marks
Deflash plastic and metal parts
Stone cleaning / designing
Company Contact:
Contact Name: Hetal Shah
Company Name: Precidose Pumps & System
Email:
Tel: 91-79-25830762
Fax:
Street Address: 62/13, Phase – I,
Nr. Patels Airtemp, G.I.D.C., Vatva,
Ahmedabad – 382 445 India
Website: http://www.precidose.com
Member name: precidose
Country:
India
Member Since: 26 October 2009
Total Leads: 44 precidose Import Export Business Leads
Business focus: High Pressure Triplex Plunger Pump, Reciprocating Piston Pump, Hydrostatic Hydrotest Pump, Car Power Pressure Washer Pump, High Pressure Cleaners
Chat:
Verify: Safe Import Export Tips
There are
a wide variety of surface preparation methods available, such as solvent cleaning, power-tool cleaning, dry sand blasting etc. But, all these conventional methods are rarely used because they are time consuming, not cost effective & provide poor cleaning results & also create environmental pollution.
Nowadays, water sandblasting by high pressure waterjet pump has got wide acceptance in the field of surface preparation as well as in paint removal & rust Removal. In wet sandblasting, an abrasive material is mixed with the waterjet to create an abrasive spray. This abrasive spray is blasted on the surface, which breaks away small pieces of undesirable coating corrosion or other undesirable substances to create the desired metal finish, perfect for recoating.
Wet sandblasting is widely used in engineering, heavy engineering, fabrication, construction and many other industries for different applications.
how water sandblasting works?
Start the high pressure system and adjust the water flow and system pressure with your nozzle selection, pump RPM and Regulating Unloader setting. Open the trigger on gun to assure system is operating properly.
Place the sand induction probe in the sand supply container. With the trigger on the gun open, adjust the small valve on the mixing head. The adjustment creates a vacuum in the sand hose line and starts the flow of sand. The pressure washer sandblaster should be approximately 12 to 15 inches away from the work surface when the trigger is opened and the water sandblasting operation begins.
NOTE: Test a sample area to be certain that surface will not be damaged by abrasive action.
The angle of attack and distance from the work surface may be varied to provide the best work speed, while still maintaining the greatest amount of impact energy. For optimum performance the sand inlet hose should not exceed 25 feet.
When the wet sand blasting unit is operating efficiently, there will be a smooth and continuous flow of sand through the nozzle. The amount of sand flow is directly related to the vacuum created in mixing nozzle. The intensity of the vacuum is dependent upon the liquid velocity of the water.
The pressure and flow rate through the spray nozzle are the factors that determine the liquid velocity, amount of vacuum and rate of sand flow.
If the spray nozzle is chosen to give the maximum pressure and flow rate possible for the pump, the rate of sand flow will also be at maximum. Total vacuum seal and maximum swirl velocity are obtained at 5ΒΊ spray nozzle.
advantages
Because of the water ingredient, it will not create any environmental pollution problem caused by fluttering the micro power.
It can remove the burrs (surface projections) & scales formed on surface and clean the surface without damaging the work piece.
The surface finishing can access a homogeneous matte finish (spot pattern). It can contribute significantly to the finishing demand for surface roughness.
It only applies small shot blasting effect to the surface to be finished and improve and reinforce the material of work piece.
The foreign materials after being removed will be rinsed and flushed out by the jet of water.
It doesn\ t require any chemical during operation.
It doesn\ t affect the dimensions of the object.
limitations
Antirust inhibitor is to be used after cleaning ferrous material.
Though water consumption is not too high, it is to be taken in to account to dispose it off or recycled.
The surface roughness is more than dry sand blasting.
applications
Paint removal, rust removal, corrosion removal & scale removal
Casting Cleaning
Ship hull cleaning
Clean & peen precision parts
Clean areas, which are not accessible to hand sanders
Produce and anchor pattern ideal for uniform finishing
Deburr machined parts
Blend light scratches and tool marks
Deflash plastic and metal parts
Stone cleaning / designing
Company Contact:
Contact Name: Hetal Shah
Company Name: Precidose Pumps & System
Email:
Tel: 91-79-25830762
Fax:
Street Address: 62/13, Phase – I,
Nr. Patels Airtemp, G.I.D.C., Vatva,
Ahmedabad – 382 445 India
Website: http://www.precidose.com
Member name: precidose
Country:
IndiaMember Since: 26 October 2009
Total Leads: 44 precidose Import Export Business Leads
Business focus: High Pressure Triplex Plunger Pump, Reciprocating Piston Pump, Hydrostatic Hydrotest Pump, Car Power Pressure Washer Pump, High Pressure Cleaners
Chat:
Verify: Safe Import Export Tips
Similar Suppliers And Manufacturers Import Export Trade Leads
All-in-one Air Source Heat Pump Water Heater With Water Tank - By gtheatpump - On Thursday 8 June 2023 6:59 am: water heater with water tank
product description
what is all in one heat pump
it s an integrated hot water heat pump water heater which is specia....
Half-wet Material Crusher - By tiancimachine - On Thursday 15 September 2022 6:31 am: half-wet material crusher
introduction
the series of semi-wet material crusher is a professional one with many years experience and advanced crushing technology at home and ....
Custom Wet Fountain Design - By dlsfountain - On Monday 6 February 2023 1:54 am: water fountain boasts spectacular scenes and you can see the assemble performance above the sea lake and river
when thousands of lights hundreds o....
Half-wet Material Crusher - By zhengzhouhuaqiang - On Saturday 17 September 2022 7:48 am: water content it is national initiative and has been declared the national patent the successful development of the half-wet material crusher has pla....
Half-wet Material Crusher - By fertilizerproductionline - On Saturday 17 September 2022 9:21 am: wet material crusher plays a vital role in the process of wet material processing and utilization it can effectively crush the unique wet viscosity o....
Pet Dog Cat Wet Wipes - By lihua - On Thursday 13 October 2022 2:51 am: wet wipes are a great way to keep your pet clean and fresh smelling they are also great for removing dirt and debris from your pet s coat wet wipes ....
Household Kitchen Oil And Dirt Cleaning Wet Tissue - By lihua - On Thursday 13 October 2022 2:58 am: wet tissue is a must-have product for any home it can be used to clean up any spills or messes in the kitchen and it s also great for removing dirt a....
China Manufacturer Disposable Wet Baby Wipes Non Woven Fabric - By lihua - On Thursday 13 October 2022 2:50 am: wet baby wipes non-woven fabrics and other products we are proud of our products and services our experienced staff are always on hand to answer you.... Import Export Startup Stories
Share Your Story & Get Listed at StartImportExport.com- NVision Technology Co Ltd: Derek Chown Of NVision Technology Manufacturing Water Machines From China
- Yandiya Limited: Stephen Randell Of Yandiya Limited Producing Instant Hot Water Heaters From China
- Global International Co., Ltd: an exclusive natural mineral water suppliers in the Russian Beverage Market
- Fujian Green Spring Environmental Material Technology Co Ltd: Christina Of Fujian Green Spring Environmental Material Technology From China
- Huiying Chemical Industry (Xiamen) Co Ltd : Robert Lee Of Huiying Chemical Industry Manufacturer Of Detergent 4A Zeolites From China
TradersCity.com shall not be held liable for any user posted/submitted content including but not limited to trade leads, profiles, images, and any other data. TradersCity.com does not and did not verify any of users posted/submitted data nor is implicitly or explicitly recommending these business offers. TradersCity does not verify truthfulness, accuracy, completeness, nor legality of any businesses, services, and leads posted here. TradersCity does not represent Sellers or Buyers in any transaction between users of the website and is unable to make any opinion in regard to their performance in any transaction. TradersCity neither guarantees nor undertakes in any dispute between sellers and buyers. Protect your business from fraud by trading safely