-
- Trade Leads
- Trade Services
- B2B Directories
- Trade Connections
- Misc
- Contact Us
A free import export trade leads B2B marketplace since 1996 for manufacturers, suppliers, exporters, importers, buyers, sellers, wholesalers, freight forwarders, shippers, trade shows, exhibits, and export management.
Hello visitor from
USA - 147 visiting from 120 USA 
16 Canada 
5 UK 
3 Belgium 
1 Ireland 
1 Germany 
1 Iran
Hello visitor from
USA - 147 visiting from 120 USA 16 Canada 5 UK 3 Belgium 1 Ireland 1 Germany 1 Iran
Zgb Series Slurry Pump
Posted at: Offers to Sell and Export | Posted on: Friday 29 January 2021 5:53 am | Poster last visit: Friday 29 January 2021 |
Product Category: Main
» Electrical Systems and Lighting and Components and Accessories and Supplies
» Electrical equipment and components and supplies
» Electrical controls and accessories
» Series reactor
» Zgb Series Slurry Pump
Product Description:
ZGB series slurry pump vertical spindle pump slurry pump impeller portable slurry pump small slurry
pump
ZGB series slurry pump: modern CAD design, excellent hydraulic performance, high efficiency, low wear rate, large flow rate, multi - span, multi - stage series, mainly used for power, metallurgy, mining conveying corrosive slurry, Especially used in power plant ash.
In mining operations, slurry pumps are used to transport the target minerals and overburden to plants which use a system of wet separation. After crushing and screening, the mineral is usually milled before being transported for further separation. This process requires a large volume of slurry to be transported across often long distances. Once this process is complete, the tailings are usually disposed of via piping systems to the tailings dumping site.
Special designs are also available for handling froth in the separation process.
Slurry pump selection is a complex process and requires close cooperation between the pump manufacturer and the end user as the medium to be pumped and the pump operating conditions are extremely important to the correct pump selection.
This article will outline the basic principles involved in selecting the right pump for the job, and will look predominantly at centrifugal slurry pumps.
slurry pumping Characteristic
1.Hydraulic driven, two ceramic pistons working up and down stably
2.The highest feeing pressure could be 2.5Mpa, the rate pressure is 2.0Mpa, the pressure could be adjusted.3. Pistons are made of alumina ceramics, of great abrasion resistance and corrosion resistance
4. Using combined seal, good sealing efficiency
5.Good Design Structure, Convenient Installation and maintenance, Long Usage Life Span
Centrifugal slurry pumps
Fengwang-Centrifugal slurry pumps are typically used in mineral extraction process plants, and are designed to handle abrasive solids mixed with a carrier fluid.
Slurry pumps often operate 24/7, and in severe conditions the wear life of wetted components can be up to two to three months.
Since excessive wear would be generated on the inter-stage passages of a multi-stage slurry pump, they are invariably single-stage equipment.
Both horizontal and vertical shaft configurations are available, with transmission of process slurries around a plant usually handled by horizontal pumps, while vertical pumps are used in sumps and generally have a cantilevered shaft so that all bearings are located above fluid level.
Slurry pump selection
Slurries are often very abrasive and may contain large solid particles. This makes wear life and the ability to pass these large solids key considerations in pump design and application.
Wear can be controlled by proper pump selection based on the application details provided by the user, and is related to the velocity between the pumped slurry and the pump. For pumps in more severe services to have a satisfactory life, liquid velocities should be reduced.
Experience has shown that the impeller rotational speed should be kept as low as possible for pumps handling abrasive fluids. Wear will vary approximately as the cube of the speed and with particle concentration.
Rubber-lined pumps are limited to lower impeller peripheral speeds because pressure fluctuations from the passing impeller vanes may cause internal heating due to the deformation hysteresis of the rubber. Increasing pressure fluctuations would eventually lead to degradation of the rubber polymer structure.
When operating conditions or other considerations require longer component life, the peripheral speeds should be lowered, noting that wear life would be approximately doubled by a 20 per cent drop in pump rotational speed.
Even the largest, most robust pump running at slow speed may still experience gouging and wear. Where the pump is running compared to its design best efficiency point (BEP) is important. Acceptable gouge-free wear depends, among other factors, on the actual percentage of BEP flow rates experienced during operation, with 100 per cent BEP being the optimum.
Fengwang automatic coal washing machine, low energy consumption, many types, convenient installation, simple operation, environmental protection and pollution-free, with rich technical experience, and we are also one of slurry pump manufacturers.
Company Contact:
Contact Name: Wu Shasha
Company Name: Shijiazhuang Mining Fengwang Machinery Co. Ltd
Email:
Tel: 86031185417306
Fax:
Street Address: West Hengxi Village,
Mining Area Shijiazhuang, Hebei
50100 China
Website: https://www.fengwangxmj.com
Member name: fengwangxmj
Country:
China
Member Since: 29 January 2021
Total Leads: 6 fengwangxmj Import Export Business Leads
Business focus: Coal Washing Machine, Vibrating Screen
Chat:
Verify: Safe Import Export Tips
pump
ZGB series slurry pump: modern CAD design, excellent hydraulic performance, high efficiency, low wear rate, large flow rate, multi - span, multi - stage series, mainly used for power, metallurgy, mining conveying corrosive slurry, Especially used in power plant ash.
In mining operations, slurry pumps are used to transport the target minerals and overburden to plants which use a system of wet separation. After crushing and screening, the mineral is usually milled before being transported for further separation. This process requires a large volume of slurry to be transported across often long distances. Once this process is complete, the tailings are usually disposed of via piping systems to the tailings dumping site.
Special designs are also available for handling froth in the separation process.
Slurry pump selection is a complex process and requires close cooperation between the pump manufacturer and the end user as the medium to be pumped and the pump operating conditions are extremely important to the correct pump selection.
This article will outline the basic principles involved in selecting the right pump for the job, and will look predominantly at centrifugal slurry pumps.
slurry pumping Characteristic
1.Hydraulic driven, two ceramic pistons working up and down stably
2.The highest feeing pressure could be 2.5Mpa, the rate pressure is 2.0Mpa, the pressure could be adjusted.3. Pistons are made of alumina ceramics, of great abrasion resistance and corrosion resistance
4. Using combined seal, good sealing efficiency
5.Good Design Structure, Convenient Installation and maintenance, Long Usage Life Span
Centrifugal slurry pumps
Fengwang-Centrifugal slurry pumps are typically used in mineral extraction process plants, and are designed to handle abrasive solids mixed with a carrier fluid.
Slurry pumps often operate 24/7, and in severe conditions the wear life of wetted components can be up to two to three months.
Since excessive wear would be generated on the inter-stage passages of a multi-stage slurry pump, they are invariably single-stage equipment.
Both horizontal and vertical shaft configurations are available, with transmission of process slurries around a plant usually handled by horizontal pumps, while vertical pumps are used in sumps and generally have a cantilevered shaft so that all bearings are located above fluid level.
Slurry pump selection
Slurries are often very abrasive and may contain large solid particles. This makes wear life and the ability to pass these large solids key considerations in pump design and application.
Wear can be controlled by proper pump selection based on the application details provided by the user, and is related to the velocity between the pumped slurry and the pump. For pumps in more severe services to have a satisfactory life, liquid velocities should be reduced.
Experience has shown that the impeller rotational speed should be kept as low as possible for pumps handling abrasive fluids. Wear will vary approximately as the cube of the speed and with particle concentration.
Rubber-lined pumps are limited to lower impeller peripheral speeds because pressure fluctuations from the passing impeller vanes may cause internal heating due to the deformation hysteresis of the rubber. Increasing pressure fluctuations would eventually lead to degradation of the rubber polymer structure.
When operating conditions or other considerations require longer component life, the peripheral speeds should be lowered, noting that wear life would be approximately doubled by a 20 per cent drop in pump rotational speed.
Even the largest, most robust pump running at slow speed may still experience gouging and wear. Where the pump is running compared to its design best efficiency point (BEP) is important. Acceptable gouge-free wear depends, among other factors, on the actual percentage of BEP flow rates experienced during operation, with 100 per cent BEP being the optimum.
Fengwang automatic coal washing machine, low energy consumption, many types, convenient installation, simple operation, environmental protection and pollution-free, with rich technical experience, and we are also one of slurry pump manufacturers.
Company Contact:
Contact Name: Wu Shasha
Company Name: Shijiazhuang Mining Fengwang Machinery Co. Ltd
Email:
Tel: 86031185417306
Fax:
Street Address: West Hengxi Village,
Mining Area Shijiazhuang, Hebei
50100 China
Website: https://www.fengwangxmj.com
Member name: fengwangxmj
Country:
ChinaMember Since: 29 January 2021
Total Leads: 6 fengwangxmj Import Export Business Leads
Business focus: Coal Washing Machine, Vibrating Screen
Chat:
Verify: Safe Import Export Tips
Similar Suppliers And Manufacturers Import Export Trade Leads
Vertical Slurry Pump - By sgbslurrypump - On Monday 25 September 2023 3:03 am: slurry pump
product description
the vertical slurry pump is a vertical axial suction single-stage single suction centrifugal structure it is mainly....
Horizontal Slurry Pump - By sgbslurrypump - On Friday 25 November 2022 3:24 am: slurry pump
slurry pump description
structural features
single stage single suction horizontal centrifugal pump
wet parts such as casing impell....
Slurry Pump For Sale - By sgbslurrypump - On Friday 25 November 2022 3:22 am: slurry pump is a type of pump designed for pumping liquid containing solid particles slurry pumps changes in design and construction to adjust to mul....
Fgd Slurry Recirculation Pump - By sgbslurrypump - On Friday 25 November 2022 3:25 am: slurry recirculation pump
product description
flue-gas desulfurization pump fgd is a set of technologies used to remove sulfur dioxide so2 from ....
Slurry Pump Centrifugal Ground - By kenshinepump - On Friday 31 March 2023 6:24 am: slurry pump is a horizontal single stage single suction cantilever double shell structure widely used to transport slurry containing solid particl....
Metal Slurry Pump Spare Parts - By hongchangpump - On Wednesday 13 December 2023 1:16 am: slurry pump spare parts
product description
slurry pump spare parts are an essential part of the slurry pump components the wet ends parts of slurr....
Hc Series Heavy Duty Slurry Pump - By hongchangpump - On Wednesday 13 December 2023 1:13 am: slurry pump
product description
the frame plate liners for hc series pumps have replaceable wear-resistant metal liners the impellers are made of w....
Heavy Duty Double-case Slurry Pump - By sgbslurrypump - On Friday 25 November 2022 3:23 am: slurry pump
structural features
single stage single suction double-case horizontal centrifugal pump
wet parts such as casing impeller liner .... Import Export Startup Stories
Share Your Story & Get Listed at StartImportExport.com- Shanghai Hold Heavy Industry Co Ltd: Warren Guo Of Shanghai Hold Heavy Industry, A Manufacturer Of Various Concrete Construction Machinery From China
- Shenzhen RiOu Refrigeration Machine Equipment Co Ltd: Vivian Hu Of Shenzhen RiOu Refrigeration Machine Equipment Company From China
- Wenzhou Joy Autoparts Co Ltd: Vivian Of Wenzhou Joy Auto Parts From China
- Aisi Machinery Co Ltd: Donald Of Aisi Machinery, A Supplier Of Concrete Machinery From China
Series reactor Classification Navigation
Main - Electrical Systems and Lighting and Components and Accessories and Supplies - Electrical equipment and components and supplies - Electrical controls and accessories - Series reactor [9]
TradersCity.com shall not be held liable for any user posted/submitted content including but not limited to trade leads, profiles, images, and any other data. TradersCity.com does not and did not verify any of users posted/submitted data nor is implicitly or explicitly recommending these business offers. TradersCity does not verify truthfulness, accuracy, completeness, nor legality of any businesses, services, and leads posted here. TradersCity does not represent Sellers or Buyers in any transaction between users of the website and is unable to make any opinion in regard to their performance in any transaction. TradersCity neither guarantees nor undertakes in any dispute between sellers and buyers. Protect your business from fraud by trading safely